• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.338-348
• /
• 2024

Airbrushes are being utilized in various industries due to their practicality and ability to express a wide range of designs. Especially in the field of body painting, they have become an essential tool for artists. Airbrushes enable precise color application, shaping, and gradient expression, thereby reducing work time, which has led to their increasing use in the field of body painting. This study aims to present the latest design trends in airbrush body painting by analyzing the design composition, color planning, blending, and expression techniques, focusing on award-winning works in the airbrush-exclusive category of internationally recognized World Bodypainting Festivals. The results are as follows. Firstly, in terms of design composition, emphasis and balance principles are primarily used. The main image is emphasized at the center of the upper body, while a balanced composition with left-right symmetry is observed in the lower body. Secondly, color planning and blending primarily utilize contrasting colors to enhance visibility. Thirdly, all major award-winning works utilize stencil and gradient techniques to accurately depict shapes and add dimension. Based on these analyses, body painting designs were planned and executed using airbrushes. Through such artwork production, the artistic utilization of airbrush body painting is aimed to be popularized, contributing to domestic research in the field of airbrush body painting.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1594-1599
• /
• 2007

Plasma membrane proteins from pig adipocytes, brain, heart, kidney, liver and spleen were isolated using a 32% sucrose gradient. An adult male sheep was immunized three times at 3-wk intervals with the purified pig adipocyte plasma membrane (APM) proteins. Blood samples were taken from the immunized sheep 12 d after the third immunization. Antiserum showed strong reactivity with APM proteins determined by ELISA, and the reactivity could be detected at dilutions in excess of 1:128,000. Antiserum showed very low binding affinity with proteins isolated from brain, heart, kidney, liver or spleen. Ninety weanling pigs were allocated randomly to three treatment groups and were injected i.p. with 40 ml of antiserum (n = 30) or 20 ml of lyophilized antiserum (21.5 mg/ml; n = 30). A control group (n = 30) received 40 ml of saline, and all pigs were slaughtered at 24 wk of age. The polyclonal antiserum did not change BW or ADG. Carcass percentage of pigs was numerically increased by the antiserum treatment compared with control. Both antiserum treatments did not significantly (p>0.05) affect body composition, including body fat content, relative to the control group.

• Journal of the Korean Ceramic Society
• /
• v.23 no.2
• /
• pp.13-20
• /
• 1986

Composite polycrystals including ${\gamma}$-$6Bi_2O_3$.$SiO_2$ crystal which have needlelike regular structure are useful for the high resolution optical devices. For the purpose of obtaining the composite polycrystals described above the melts of eutectic composition in the three eutectic systems including $6Bi_2O_3$.$SiO_2$ composition were unidirectionally solidified at a rate of 0.05 and 0.25 cm/h under a thermal gradient of 10$0^{\circ}C$/m. Composite polycrystals of relatively regular structure in which needlelike ${\gamma}$-$6Bi_2O_3$.$SiO_2$ crystals were arrayed in parallel with $2Bi_2O_3$.$B_2O_3$ crystal matrix were obtained when the eutectic melt of $6Bi_2O_3$.$SiO_2 -2Bi_2O_3$.$B_2O_3$ system was solidified at a rate of 0.25 cm/h. Partial structural irregularity however was found in the obtained composite polycrystals.

• Korean Journal of Materials Research
• /
• v.30 no.11
• /
• pp.627-635
• /
• 2020

3D printing technology is a processing technology in which 3D structures are formed by fabricating multiple 2D layers of materials based on 3D designed digital data and stacking them layer by layer. Although layers are stacked using inkjet printing to release various materials, it is still rare for research to successfully form a product as an additive manufacture of multi-materials. In this study, dispersion conditions are optimized by adding a dispersant to an acrylic monomer suitable for inkjet printing using Co₃O₄ and Al₂O₃. 3D structures having continuous composition composed of a different ceramic material are manufactured by printing using two UV curable ceramic inks whose optimization is advanced. After the heat treatment, the produced structure is checked for the formation and color of the desired crystals by comparing the crystalline analysis according to the characteristics of each part of the structure with ceramic pigments made by solid phase synthesis method.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.1-4
• /
• 1988

Rates of solvolysis of trans-[Co$(N-eten)_2Cl_2$]$^+$ have been investigated using spectrophotometric method at various pressures and temperatures in the mixtures of water with the t-butyl alcohol which possesses a high structure inducing capacity in water. The values of ${\Delta}V^{\neq}$ obtained from pressure effect on the rate constants were 2.55∼ 5.83 $cm^3mol^{-1}$. These values were discussed in terms of dissociative mechanism. Extrema found in the variation of ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$ with solvent composition correlated with extrema in the variation of the physical properties of the mixtures. The logarithms of rate constants correlated linearly with both Grunwald-Winstein parameter and the reciprocal of dielectric constant ($Ds^{-1}$). The gradient, m of Grunwald-Winstein plot for the trans-[Co$(N-eten)_2Cl_2$]$^+$ was 0.09, which is significantly lower than those for the other cobalt (Ⅲ)-dichloro complexes. It was suggested that the reaction is an Id mechanism with long extension of Co-Cl bond in the transition state, as found for the C-Cl bond in the transition state for the solvolysis of t-butyl chloride.

• Korean Journal of Materials Research
• /
• v.32 no.4
• /
• pp.230-236
• /
• 2022

The formation behavior of a passive state film on the surface of STS304 in electrolytic solution was analyzed to determine its metallic ion composition. The properties of passive state films vary depending on the Fe and Cr ions in the electrolytic solution. It was observed that the passive state film surface became flat and glossy as the concentration of Fe and Cr ions in the electrolytic solution increased. The corrosion resistance property of the passive state film was proportional to the amount of Fe and Cr in the electrolytic solution. An initial passive state film with high Fe concentration was formed on the surface of STS304 during early electrolytic polishing. Osmotic pressure of Fe ions occurs between the passive state film and electrolytic solution due to the Fe ion concentration gradient. The Fe in the passive state film is dissolved into the electrolyte, and Cr fills up the Fe ion vacancies. As a result, a good corrosion-resistant floating film was formed. The more Fe ions in the electrolytic solution, the faster the film is formed, and as a result, a flat passive state film containing a large amount of Cr can be formed.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.42-50
• /
• 2013

Since 1990's, a plywood for flooring base has gotten customers' demand. Costs of raw material and production increased because of changed environment of industry. Tropical timber such as Red Meranti (Shorea acuminate) used for raw material of the floor has been depleting beside countries in South Eastern Asia changed species of afforestation. As a result, it gets hard to secure good quality of raw material for plywood. Moreover plywood price is increased suddenly after earthquake in Japan. Eucalyptus (Eucalyptus globulus) in china has been using for raw material as a countermeasure of changed environment of industry. In this study, possibility of using flooring consisted of Eucalyptus veneer as crossband layers was checked by deflection experiments. Flooring consisted of Red Meranti was used for comparison. Two factors which impact on deflection are a type of density gradient and density difference between Long-grain veneer and Short-grain veneer. Red Meranti samples are M type of density gradient on the other hand Eucalyptus samples are W type of density gradient. The more samples have high density difference, the more deformation was checked. A sample which has big density difference between core and cross bands layer warp more also deform. Flooring was deformed smaller than plywood and samples which have big density difference was deformed more.

• The Korean Journal of Petroleum Geology
• /
• v.7 no.1_2 s.8
• /
• pp.1-6
• /
• 1999

Natural gas hydrate, a solid compound of natural gas (mainly methane) and water in the low temperature and high pressure, is widely distributed in permafrost region and deep sea sediments. Gas hydrate stability field (GHSF), which corresponds to the conditions of a stable existence of solid gas hydrate without dissociation, depends on temperature, pressure, and composition of gas and interstitial water. Gas hydrate-saturated sediment are easily recognized by the bottom simulating reflector (BSR), a strong-amplitude sea bottom-mimic reflector in seismic profiles. It is known that BSR is associated with the basal boundary of the GHSF, The purpose of this study is to define the GHSF and its occurrence in the southwestern part of Ulleung Basin, East Sea. The hydrothermal gradient is measured using the expandable bathythermograph (XBT) and the geothermal gradient data are utilized from previous drilling results for the adjacent area. By the laboratory work using methane and NaCl $3.0 wt{\%}$ solution, it is shown that the equilibrium pressures of the gas hydrate reach to 2,920.2 kPa at 274.15 K and to 18,090 kPa at 289.95 K for the study area. Consequently, it is interpreted that the lower boundary of the GHSF is about 210 m beneath 400-m-deep sea bottom and about 480 m beneath 1,100-m-deep sea bottom. The resultant boundary is well matched with the depth of the BSR obtained from the seismic data analysis for the study area.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.17-23
• /
• 1999

Studies were carried out to elucidate the effects of pressure, temperature and mobile phase composition on supercritical $CO_2$ chromatographic separations of paclitaxel, baccatin III, 10-deacetyl baccatin III, 7-epi-10-deacetyltaxol, cephalomanine, and 10-deacetyltaxol. High resolutions of paclitaxel, 10-deacetylbaccatin III, 10-deacetyltaxol were observed with optimized pressure, temperature, and mobile phase composition. The highest resolution between paclitaxel and 10-deacetylbaccain III was observed at 275 kg/$\textrm{cm}^2$, $40^{\circ}C$ with the mobile phase composition of gradient mixture of 3.9-3.6 mL/min $CO_2$, 0.1-0.4 mL/min methanol for 20 min. Resolutions of baccatin III, capalomannine, and 7-epi-10-deacetyltaxol were found to be low in this study. On-line coupled SFE/SFC process was applied to isolate paclitaxel from yew tree powder. As a consequence, paclitaxel with a purity of 95% was obtained with a recovery yield of 38%.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.127-138
• /
• 1994

In the process of pervaporation separation for aqueous ethanol solution through cellulose tai-acetate(CTA) membrane, the modelling on the solution-diffusion permeation mechanism was built up on the basis of sorption and permeation experimental results. Also its function type and parameter were examined. The composition of sorption equilibrium in three component system(Ethanol/Water/CTA) were compared with the calculated value by Flory-Huggins' equation using the pure component sorption data. In order to apply the thermodynamic equilibrium relationship between the membrane free composition in the membrane and the equilibrium composition in the liquid phase, the apparent activity this system, however, the results were not satisfied. Diffusion equations were expressed with the concentration gradient considering permeate alone, and a concentration-dependent diffusion coefficient which includes a parameter was used. And this model was fitted with the measured permeation rates. If the permeation rate and the amount of sorption of one component were much larger than those of the other, the bulk flow term could not be negligible. The flux and selectivity were increased with increasing temperature, and with decreasing downstream pressure.