• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.166-176
• /
• 1996

The fundamental conditions for growing $CsLiB_{6}O_{10}$ crystal, new nonlinear optical material, were investigated. Stoichiometirc mixture of $CsLiB_{6}O_{10}$ composition resulted in the crystal of the same composition in the process of heating at the temperature above $600^{\circ}C$. No phase transition was observed in the $CsLiB_{6}O_{10}$ crystal in the temperature range of $600^{\circ}C~800^{\circ}C$, and $CsLiB_{6}O_{10}$ crystal melted congruently at $850^{\circ}C$. When the melt of this composition was cooled at rates of $1~150^{\circ}C/hr$, glass state ingot was formed regardless of cooling rates. However, $CsLiB_{6}O_{10}$ crystals were formed directly from the melt at any cooling rate in the presence of $CsLiB_{6}O_{10}$ seed crystal in the melt. Transparent $CsLiB_{6}O_{10}$ single crystal was grown from the melt using the seed crystal at the growing rate of 0.06 mm/hr in the furnace having the temperature gradient of $100^{\circ}C/cm$. Analysis of the single crystal showed that the crystal belonged to the noncentrosymmetric tetragonal space group 142d and unit cell dimensions were $a=10.467(1)\;{\AA},\;c=8.972(1)\;{\AA}\;and\;V=983.0(2)\;{\AA}^3$. Optical absorption edge of the crystal was observed at 180mm and the crystal showed a good optical transparency (70% transmittance, sample thickness 0.5 mm) in the wide wavelength range above 300 nm.

• Korean Journal of Environment and Ecology
• /
• v.25 no.3
• /
• pp.327-357
• /
• 2011

This study compared the species composition and distribution of the forest communities between Korea and Japan using vegetation releve database. The study included the eastern and southern Korean Peninsula, Is. Jeju, Is. Ulreung, northern Kyushu, central part of Japan and Is. Tsushima and divided in fourteen region with major mountain as the center. Seventy-nine forest communities were classified by tabular comparison with the total of 1844 releves. In the composition table, fifty-four groups of plant species were listed. Some grew in one area exclusively, while others were present in multiple locations. This study showed the similarity and heterogeneity of species composition among study areas. We grouped fourteen types showing similar physiognomy for forest communities. The physiognomical features of the vertical vegetation zones in the study area were similar, however, dominant species and species composition were different between the regions. In the lowland zone, Castanopsis-Type dominated by Castanopsis cuspidata var. sieboldii or Castanopsis cuspidata were distributed in the study area except for northern part of the Korean Peninsula and Is. Ulreung. Additionally, Persea thunbergii-Type was distributed widely in the lowest part of the study area, however, it showed the simplification of the species composition in the Korean Peninsula and Is. Ulreung. In the hilly zone, evergreen forest composed by Abies firma-Type distributed in northern Kyushuand Is. Tsushima, but it was absent in the other study region. The difference in forest community was conspicuous, especially in the montane zone. Deciduous broadleaved forests composed Quercus(D)-Type and Fagus-Type widely distributed in the montane of study area. However, forest community dominated by Quercus mongolica and Fagus multinervis flourished in Korea. On the otherhand, forest community dominated by Quercus mongolica var. grosseserrata, Fagus crenata and F. japonica distributed in Japan. In the sub-alpine zone, evergreen coniferous forest composed Abies-Quercus(D)-Type, Abies koreana-Type, and Pinus pumila-Type were distributed in the Korean Peninsula and Is. Jeju. Forests composed Taxus cuspidata var. nana-Type, Abies mariesii-Type, and Pinus pumila-Type distributed in the central part of Japan. As a result of DCA ordination, evergreen broadleaved forests of the whole study area showed the lower scores along the first axis, while deciduous and coniferous forests showed the higher scores. The forest types of western part of Japan were located the higer scores, forest types of the Korean Peninsula were located the lower scores, and forest types of Is. Jeju located in the middle. Warmth index (WI) and Annual range of temperature in climate factor were highly correlated on the first axis. The first axis reflected the gradient from oceanic climatic to continental one. The higher the altitude and further geographically, the lower the similarity among communities and the peculiarity of community appeared stronger. The historical background reflecting local flora has strongly influenced on development of community.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.61-68
• /
• 2010

A magnetotelluric (MT) survey has been performed to delineate deeply extended fracture systems at the geothermal field in Seokmo Island, Korea. To assist interpretation of the MT data, geological surveying and well logging of existing wells were also performed. The surface geology of the island shows Cretaceous and Jurassic granite in the north and Precambrian schist in the south. The geothermal regime has been found along the boundary between the schist and Cretaceous granite. Because of the deep circulation along the fracture system, geothermal gradient of the target area exceeds $45^{\circ}C/km$, which is much higher than the average geothermal gradient in Korea. 2D and 3D inversions of MT data clearly showed a very conductive anomaly, which is interpreted as a fracture system bearing saline water that extends at least down to 1.5 km depth and is inclined eastwards. After drilling down to the depth of 1280 m, more than 4000 tons/day of geothermal water overflowed with temperature higher than $70^{\circ}C$. This water showed very similar chemical composition and temperature to those from another existing well, so that they can be considered to have the same origin; i.e. from the same fracture system. A new geothermal project for combined heat and power generation was launched in 2009 in Seokmo Island, based on the survey. Additional geophysical investigations including MT surveys to cover a wider area, seismic reflection surveys, borehole surveys, and well logging of more than 20 existing boreholes will be conducted.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2021-2026
• /
• 2009

Toluene, xylene and styrene are volatile organic solvents that are commonly used in mixtures in many industries. Because these solvents are metabolized and then excreted in urine, their urinary metabolites are thought to be biomarkers of occupational exposure to these solvents. Therefore, a simple, rapid, and yet reliable analytical method for determining the metabolites is required for accurate biological monitoring. In the present study, a simple and rapid HPLC-UV method was developed for the simultaneous determination of eight major metabolites of toluene, xylene and styrene: hippuric acid (HA), mandelic acid (MA), o-, m- and p-methylhippuric acids (o-, m- and p-MHAs), and o-, m- and p-cresols. A monolithic column was employed as the stationary phase and several conditions, including flow rate, composition of mobile phase and column temperature, were variables for the optimization of the chromatographic resolution. All eight metabolites were successfully resolved within 5 minutes in 10% aqueous ethanol containing 0.3% acetic acid and 1.6% $\beta$-cyclodextrin, using a flow rate gradient of 1.0 - 5.0 mL/min at 25 ${^{\circ}C}$. The performance of this method was validated by linearity, intra- and inter-day accuracy, and precision. The linearity was observed with correlation coefficients of 0.9998 for HA, 0.9999 for MA, 0.9989 for o-MHA, 0.9998 for m-MHA, 0.9991 for p-MHA, 0.9997 for o-cresol, 0.9998 for m-cresol, and 0.9986 for p-cresol. The intra- and inter-day precision of the method were less than 5.89% (CV) and the accuracy ranged from 92.95 to 106.62%. The validity was further confirmed by analysis of reference samples that were prepared by the inter-laboratory quality assurance program of the Korea Occupational Safety and Health Agency (KOSHA, Seoul, Korea). All measured concentrations of the analytes agreed with the certified values.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.829-834
• /
• 2011

Lysozyme in egg white functions as bacteriolysis agent and ovalbumin plays a role as antigen in immune system. Egg white analysis methods usually include electrophoresis, gel permeation chromatography and reversed-phase HPLC(RP-HPLC). Among them, RP-HPLC was selected for rapid analysis and C18 column(Agilent, USA) was used as HPLC column. Optimum conditions were searched by changing mobile phase and temperature. Capacity factor and resolution were calculated and compared for various elution conditions. In the isocratic elution, mobile phase volume ratio was changed from 30/70/0.1 to 60/40/0.1(Acetonitrile(ACN)/Distilled water(DW)/Trifluoroacetic acid(TFA)). ACN composition was increased by 10% and temperature was set as $20^{\circ}C$. In the gradient elution, ACN/DW ratio was changed from 10/90 to 60/40 during 20 minute and temperature was varied as 20, 30 and $40^{\circ}C$. In the isocratic elution, three peaks were separated at 50/50/0.1. Lysozyme and ovalbumin were confirmed as first and third peak in three peaks respectively. In the gradient elution, four peaks were separated at $30^{\circ}C$. Lysozyme and ovalbumin were confirmed as first peak and third peak in four peaks respectively.

• Investigative Magnetic Resonance Imaging
• /
• v.19 no.2
• /
• pp.76-87
• /
• 2015

Purpose: There is an ongoing search for a stent material that produces a reduced susceptibility artifact. This study evaluated the effect of manganese (Mn) content on the MRI susceptibility artifact of ferrous-manganese (Fe-Mn) alloys, and investigated the correlation between MRI findings and measurements of Fe-Mn microstructure on X-ray diffraction (XRD). Materials and Methods: Fe-Mn binary alloys were prepared with Mn contents varying from 10% to 35% by weight (i.e., 10%, 15%, 20%, 25%, 30%, and 35%; designated as Fe-10Mn, Fe-15Mn, Fe-20Mn, Fe-25Mn, Fe-30Mn, and Fe-35Mn, respectively), and their microstructure was evaluated using XRD. Three-dimensional spoiled gradient echo sequences of cylindrical specimens were obtained in parallel and perpendicular to the static magnetic field (B0). In addition, T1-weighted spin echo, T2-weighted fast spin echo, and $T2^*$weighted gradient echo images were obtained. The size of the low-intensity area on MRI was measured for each of the Fe-Mn binary alloys prepared. Results: Three phases of ${\alpha}^{\prime}$-martensite, ${\gamma}$-austenite, and ${\varepsilon}$-martensite were seen on XRD, and their composition changed from ${\alpha}^{\prime}$-martensite to ${\gamma}$-austenite and/or ${\varepsilon}$-martensite, with increasing Mn content. The Fe-10Mn and Fe-15Mn specimens comprised ${\alpha}^{\prime}$-martensite, the Fe-20Mn and Fe-25Mn specimens comprised ${\gamma}+{\varepsilon}$ phases, and the Fe-30Mn and Fe-35Mn specimens exhibited a single ${\gamma}$ phase. The size of the low-intensity areas of Fe-Mn on MRI decreased relative to its microstructure on XRD with increasing Mn content. Conclusion: Based on these findings, proper conditioning of the Mn content in Fe-Mn alloys will improve its visibility on MR angiography, and a Mn content of more than 25% is recommended to reduce the magnetic susceptibility artifacts on MRI. A reduced artifact of Fe-Mn alloys on MRI is closely related to the paramagnetic constitution of ${\gamma}$-austenite and/or ${\varepsilon}$-martensite.

• The Korean Journal of Ecology
• /
• v.21 no.5_3
• /
• pp.713-721
• /
• 1998

The effects of artificial interference on the vegetation landscape in Mt. Nam of Seoul, Korea were clarified by analysing the distribution of vegetation landscape element and the number and size of patch depicted as a vegetation map in terms of landscape ecological principles. The effects of artificial interference on vegetation were also confirmed from the environmental gradient analysis on plant community extended from the lowland to the peak of that mountain. Vegetation landscape elements were divided into plantation and secondary forest in actual vegtation map. The ratio of plantation to secondary forest was higher in the lowland below mid-slope and the southern slope. Most afforested land were occupied by Robinia pseudoacacia and Populus tomentoglandulosa, Pinus rigida, P. koraiensis, Metasequoia glyptostroboides, Alnus hirsuta and so on are localy planted. In addition, projects to replace those afforested trees by P. densiflora as a kind of campaign for "Restoration of the one original feature of Mt. Nam" or to replace those tree species by planting young Abies holophylla or P. koraiensis under the mature afforested trees are also carried out in recent years. In cases of secondary forest, the southern slope was dominated by P. densiflora and the northern one by Q. mongolica. But the lowland of the northern slope is dominated by P. densiflora as the same as that in the southern slope. Vegetation landscape elements in Mt. Nam were much simplified comparing with that of suburban area around Seoul. The number of patches, which reflects the degree of diverse artificial interference was more in the lower area than in the upper area and more in the southern slope than in the northern one. On the other hand, the size of patch showed the antagonistic tendency to that of the number of patch. As a result of environmental gradient analysis, vegetation distribution in Mt. Nam was different from that in suburban area around Seoul. For example, Alnus japonica community, Zelkova serrata community, and Carpinus laxiflora community, which is established in mountain comparatively rare in artificial interference disappeared in Mt. Nam. As a result of analysis on vegetational succession in P. densiflora community and Q. mongolica community, both communities showed a tendency of retrogressive succession differently from that in control site located in suburban area around Seoul. In addition, species composition of P. densiflora and Q. mongolica communities in Mt. Nam were also different from those in Mt. Surak located around Seoul. It was interpreted that those results were originated from the environmental pollution and excessive arti ficial interferences.rferences.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.261-271
• /
• 1993

Functionally Gradient Materials(FGM) of 4.5Pb($Ni_{1/3}Nb_{2/3})O_3$-55PZT and PLZT(lO/70 /30, 11/60/40) were prepared. Its dielectric and piezoelectric strain properties were investigated. The FGM were pressed into A/B/ A configuration using two kinds of films, one layer(A) was eliminated from FGM by polishing after sintering at $l250^{\circ}C$, 2 hrs. The acrylic binder system was successfully applied for crack free film through doctor blade method. The thickness of gradent layer in FGM was about 30${\mu}$m. Dielectric properties of FGM show the average value of each side layer. The strain-electric field characteristics of FGM were significantly improved comparison with the other single compositions. The prepared FGM piezoelectric actuator shows about 3${\mu}$m/IOOV displacement.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.5
• /
• pp.322-329
• /
• 2019

Background: Studies have suggested that the northern provinces of Gangwon-do are good sites for licorice (Glycyrrhiza uralensis Fisch.) cultivation in Korea, as they have similar temperatures to its original locations in northern China. However, poor growth and freezing injury are often reported in Korea. Therefore, it is necessary to reassess the domestic cultivation site of licorice. Methods and Results: To determine the optimum temperature for cultivating licorice, the growth, yield, and pharmacological characteristics of G. uralensis were assessed in a temperature gradient tunnel at Eumseong, Chungcheongbuk-do, Korea in 2017. Plant height increased until the temperature rose to $5.9^{\circ}C$ above the local external temperature. Yield (㎏/10a) increased by 46.9% when the growing temperature was $1.5^{\circ}C$ to $3.0^{\circ}C$ (T2) above the external temperature and by 72.6% when the growing temperature was $3.0^{\circ}C-4.5^{\circ}C$ (T3) above the external temperature. However, a difference of $4.5^{\circ}C-5.9^{\circ}C$ (T4) above the external temperature, decreased the yield by 9.8% compared to that at T2. The glycyrrhizin content of G. uralensis roots in each temperature band was 0.72%, 0.53%, 0.91%, and 0.84% (T1, T2, T3, T4), these differences appear to result form individual plant variation rather than growth temperature. Conclusions: Based on the results of this study, we estimate that the temperature-based optimum cultivation site for G. uralensis in Korea is the south central region, rather than the northern province of Gangwon-do. Improvement in growth and yield maybe observed if the plantations in the central Jecheon (Chungcheongbuk-do, Korea) are expanded into the south central region.

• Geomechanics and Engineering
• /
• v.17 no.4
• /
• pp.343-354
• /
• 2019

The present study demonstrates the application of seismic petrophysics and amplitude versus angle (AVA) forward modeling to identify the reservoir fluids, discriminate their saturation levels and natural gas composition. Two case studies of the Lumshiwal Formation (mainly sandstone) of the Lower Cretaceous age have been studied from the Kohat Sub-basin and the Middle Indus Basin of Pakistan. The conventional angle-dependent reflection amplitudes such as P converted P ($R_{PP}$) and S ($R_{PS}$), S converted S ($R_{SS}$) and P ($R_{SP}$) and newly developed AVA attributes (${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$) are analyzed at different gas saturation levels in the reservoir rock. These attributes are generated by taking the differences between the water wet reflection coefficient and the reflection coefficient at unknown gas saturation. Intercept (A) and gradient (B) attributes are also computed and cross-plotted at different gas compositions and gas/water scenarios to define the AVO class of reservoir sands. The numerical simulation reveals that ${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$ are good indicators and able to distinguish low and high gas saturation with a high level of confidence as compared to conventional reflection amplitudes such as P-P, P-S, S-S and S-P. In A-B cross-plots, the gas lines move towards the fluid (wet) lines as the proportion of heavier gases increase in the Lumshiwal Sands. Because of the upper contacts with different sedimentary rocks (Shale/Limestone) in both wells, the same reservoir sand exhibits different response similar to AVO classes like class I and class IV. This study will help to analyze gas sands by using amplitude based attributes as direct gas indicators in further gas drilling wells in clastic successions.