• 한방재활의학과학회지
• /
• 제19권3호
• /
• pp.91-100
• /
• 2009

Objectives : The purpose of this study was to find the characteristics of Sasang Constitution, Soeumin, Soyangin and Taeumin, Using Regular Medical Inspection. Methods : Subjects of our study were 325 cases who took regular medical inspection. We collected the data of body composition analysis, 7-zone-diagnostic system, blood analysis, and analyzed by Sasang Constitution, Soeumin, Soyangin and Taeumin. Results and Conclusions : 1. In body composition analysis, Taeumin was significantly higher than Soeumin and Soyangin about soft lean mass, body fat mass, waist-hip ratio, body water index, body mass index and basal metabolic rate. In blood analysis, Taeumin was significantly highest about total protein, albumin, GPT, hemoglobin, WBC, triglyceride. In 7-zone-diagnostic system, Taeumin had the highest level at Zone 1, 2. 2. Taeumin had more significant differences than other Sasang constitutions about the parameters of regular medical inspection. 3. Body composition analysis had the most parameters that showed differences among the constitutions, followed by blood analysis and 7-zone-diagnostic system.

• 한국주거학회논문집
• /
• 제27권5호
• /
• pp.37-44
• /
• 2016

The purpose of this study is to investigate the relationship of architectural ideology and characteristics of spatial composition between Moisei Ginzburg's Narkomfin communal house and Le Corbusier's Unite d'Habitation. Narkomfin communal house and Unite d'Habitation is considered as example of experiment to construct ideal community housing model. Moisei Ginzburg designed Narkomfin communal house to make typical housing model for socialist city. Meanwhile, Le Corbusier is considered as a leader of modern functionalism architecture. His Unite d'Habitation in Marseille is important experiment for housing model in modern period. Unite d'Habitation is known to be affected by Narkomfin communal house in terms of architectural ideology and its spatial composition. This study focuses on comparative analysis between Narkomfin communal house and Unite d'Habitation through drawings, pictures and various literatures. Narkomfin communal house and Unite d'Habitation have common ideology to realize ideal community housing model. Moreover, both of them have considerable similarities in their spatial composition. First of all, unit housing of Narkomfin and Unite d'Habitation are maisonette type. Secondly, both of them have unique system that one corridor serve two of housing unit. Also, both have common facility such as laundry, childcare which is connected with their housing.

• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.737-746
• /
• 1989

After Ba-ferrite powders synthesized hydrothermally and its heated powders were dissolved partially with HCl treatment time, the BaO/Fe2O3 mole ratio of dissolved solutions and powders were measured by AAS, also, lattice constants, particle morphology and magnetic properties in HCl treated, heated and no-heated Ba-ferrite powders were abtained by means of XRD, SEM and VSM, respectively. From above analysis results, the effect of Ba/Fe mole ration in suspension(as starting material) on the BaO/Fe2O3 composition and particle characteristics of products were investigated, and the effect of heat treatment on magnetic properties of products examined. The composition, lattice constant and crystal phase of products depend on the Ba/Fe mole ratio in suspension. Ba content in surface or outer part of Ba-ferrite powder is higher than inner and heterogeneous, and the excess Ba ions in the inner part of particle move into the outer by heating, so that the mole ratio of BaO/Fe2O3 in the more jinner approaches more to the stoichiometric composition 1 : 6. The crystallinity, coercivity and saturation magnetization of products are increased by heat treatment, and the heat-treated samples synthesized hydrothermally in lower temperature are appreciated to have better powder characteristics.

• Nuclear Engineering and Technology
• /
• 제33권1호
• /
• pp.83-92
• /
• 2001

The properties of off-gas generated from vitrification process of ion-exchange resin were characterized. Theoretical composition and flow rate of the off-gas were calculated based on chemical composition of resin and it＇s burning condition inside CCM. The calculated off-gas flow rate was 67.9Nm$^3$/h at the burning rate of 40kg/h. And the composition of off-gas was avaluated as $CO_2$(41.4%), steam(40.0%), $O_2$(13.3%), NO(3.6%), and SO$_2$(1.6%) in order. Then, actual flow rate and composition of off-gas were measured during pilot-scale demonstration tests and the results were compared with theoretical values. The actual flow rate of off-gas was about 1.6 times higher than theoretical one. The difference between theoretical and actual flow rates was caused by the in-leakage of air to the system, and the in-leakage rate was evaluated as 36.3Nm$^3$/h. Because of continuous change in the combustion parameters inside CCM, during demonstration tests, the concentration of toxic gases showed wide fluctuation. However, the concentration of CO, a barometer of incompleteness of combustion inside CCM, was stabilized soon. The result showed quasi-equilibrium state was achieved two hours after feeding of resin.

• Corrosion Science and Technology
• /
• 제9권5호
• /
• pp.216-222
• /
• 2010

Most of the thirteen substations in operation in the metropolitan area were installed around the year 2000, and since water cooling methods are used to directly withdraw heat from transformer oils, a stable supply of electric power is required through optimal maintenance of facilities. The water cooling tower installed outdoors, which uses the water supply as sprinkler water, experiences the most problems. Since more than 90% of the cooling water is reused, the dissolved composition in the water becomes concentrated due to long operating hours, and impurities dissolve in the water due to air flowing in from the outside, forming hard scales on the outer surface of the cooling tube, and in extreme cases, reacting with the tube material composition, leading to corrosion. As a result, not only is cooling efficiency lowered, but in extreme cases the cooling tube must be replaced. In this study, the characteristics and composition of the scales formed on the cooling tube were analyzed and corrosion characteristics of material types were identified in order to find an efficient maintenance method for cooling tubes. In addition, the degree of dissolution of various chemicals were investigated during the removal of scales that have been formed.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.519-526
• /
• 2012

Recently fuel cell is considered to be a new technology that can substitute the ICE(Internal Combustion Engine) as well as overcome environmental issues. In military applications, fuel cell has an unique advantages, which are quietness, namely, stealth. The environmental requirement such as shock and vibration in military application, however, is very severe comparing to civilian demand. Especially, the safety concerning hydrogen storage is the most important problem. Among the candidate methods to store hydrogen, the metal hydride storage is promising method owing to the storage mechanism of chemical absorption of hydrogen to metal hydrides. In this study, the new composition of Ti-Zr type metal hydride(A composition) was suggested and investigated to increase the hydrogen storage capacity. For comparison, the hydrogen charge-discharge properties were investigated with the commercialized Ti-Zr type metal hydride(B composition) using PCT(Pressure-Composition-Temperature) measurement. Also two hydrogen storage cylinders were loaded with each metal hydride and their hydrogen charging and discharging characteristics were investigated. As a result, it was found that the new Ti-Zr type metal hydride has a slightly higher hydrogen storage capacity compared to commercial Ti-Zr type metal hydride.

• 한국연소학회지
• /
• 제19권3호
• /
• pp.44-52
• /
• 2014

Solid oxide fuel cell(SOFC) makes electric power using hydrogen or reformed from methane and emits high temperature products that contain flammable species like hydrogen, carbon monoxide and methane which varies with operation condition. SOFC/gas turbine integrated system which uses thermal and chemical energy of the discharges is more efficient than SOFC itself. Burning character of the SOFC products will affect the efficiency and stability of the system. Experiments were conducted to know the characteristics of the flame for two typical composition of SOFC products, i.e. start-up and steady state composition. When coflowing air temperature was higher than $600^{\circ}C$, auto-ignitin occurred for both fuels. Though start-up fuel has higher contents of hydrogen, it makes longer flame than steady state composition. It was inferred that the amount of oxidizer necessary to burn makes this phenomenon. Steady state composition fuel was unstable since it contains lots of water. Nozzle that had 6 holes, distance between each hole was 16.7 times of hole diameter, improved the stability of the flame.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제30권1호
• /
• pp.7-17
• /
• 2024

Purpose: This study is to present basic data and standards for calculating the space composition and area required when planning a neonatal intensive care unit. Methods: Review domestic and foreign facility standards and regulations related to the current neonatal intensive care unit, select a regional neonatal intensive care center designated by the Ministry of Health and Welfare as a case hospital, and organize a space program for the construction plan of the neonatal intensive care unit through analysis of characteristics such as facility size and function composition. Results and Implications: The size, facility area, and detailed room composition characteristics of the neonatal intensive care unit in Korea were confirmed, and essential rooms and appropriate areas were derived when planning the construction of the neonatal intensive care unit. Korea's legal facility standards related to neonatal intensive care units are lower than the actual hospital status and overseas standards, and the facility standards of the medical law need to be improved.

• 한국초지조사료학회지
• /
• 제12권1호
• /
• pp.19-25
• /
• 1992

This experiment was conducted to investigate chemical composition change and fermentation characteristics of orchardgrass, alfalfa or corn silage in the airtight silo for one year of storage. Two trials were conducted for two years. Fermentation characteristics of silages were evaluated by color, oder, texture and taste. Chemical composition of corn silage was not changed, and fermentation characteristics of this silage was favorable for 7 months of storage from December to June of the following year. In the aspect of dry matter loss and fermentation characteristics of silages, it is essential to maintain less than 70 or 60% of moisture contents in orchardgrass silage or alfalfa silage, respectively, for long term storage and feed quality stabilization. It is suggested that wilting treatment of orchardgrass or alfalfa and moisture contents of these silages are most important factors to determine silage quality.

• 한국초지조사료학회지
• /
• 제12권1호
• /
• pp.19.1-19.1
• /
• 1992

This experiment was conducted to investigate chemical composition change and fermentation characteristics of orchardgrass, alfalfa or corn silage in the airtight silo for one year of storage. Two trials were conducted for two years. Fermentation characteristics of silages were evaluated by color, oder, texture and taste. Chemical composition of corn silage was not changed, and fermentation characteristics of this silage was favorable for 7 months of storage from December to June of the following year. In the aspect of dry matter loss and fermentation characteristics of silages, it is essential to maintain less than 70 or 60% of moisture contents in orchardgrass silage or alfalfa silage, respectively, for long term storage and feed quality stabilization. It is suggested that wilting treatment of orchardgrass or alfalfa and moisture contents of these silages are most important factors to determine silage quality.