• 제목/요약/키워드: composite pipe

검색결과 187건 처리시간 0.032초

가연성 파이프 시공에 의한 전통가옥지붕에 매설된 자동소화장치 (Automatic Fire Extinguisher Having Flammable Pipes Inserted in a Cultural Assets Roof)

  • 조태준;김재준
    • 복합신소재구조학회지
    • /
    • 제5권2호
    • /
    • pp.26-31
    • /
    • 2014
  • 숭례문과 같은 목조 구조물에서는, 소화(消火)가 지붕내부에서 발생하는 경우, 기존 소화장비로 소화가 불가능하여 지붕구조를 해체하기 전에는 소화가 거의 불가능해진다는 문제점이 있다. 본 연구에서 제안하는 경사진 직선 파이프배치에 의한 지붕에 매설된 자동소화장치는 고 건축물(古建築物)의 내부에서 발생한 화재를 신속하고 효과적으로 진압하기 위한 것이다. 본 자동 소화장치는 화재 검출기의 검출 신호에 의해서 다수의 직선 파이프로 소화배체를 공급하여 화재 발생시 소화작동을 하는 소화 시스템을 구비하는데, 건축물의 지하 또는 별도의 장소에 각종 소화 기기들이 위치되고 배관을 통하여 상기 직선 파이프에 소화수 또는 소화 가스를 제공한다. 건축물의 지붕 내부에 구비된 적심상에 다수의 직선 파이프들이 배치되고, 적심 구멍에 스프링클러가 배치되며, 건축물의 실내에는 화재 감시 카메라 또는 열감지 센서와 같은 화재 검출기들이 배치 된다. 소화 수에 의한 화재 진압에 선행하여 상기 메인 파이프와 직선 파이프에는 하론 가스와 같은 소화 기체가 충전되도록 하고, 화재 발생시 이와 같은 하론 가스가 먼저 스프링 클러를 통하여 분사되도록 한 다음, 하론 가스의 소모완료시 자동으로 가압수 장치로 전환되도록 밸브계통을 자동제어 할 수 있다. 또한 직선 파이프들은 지붕을 다수의 구역으로 나누고, 그 구역에 맞추어 구역 별로 소화 수가 공급되도록 하여 메인 파이프를 설치하고, 이에 직선 파이프들을 연결하고 있기 때문에 화재 진압시 다량의 소화 수를 일시에 공급할 수 있고, 그에 따라서 귀중한 문화재산의 신속한 자동 소화가 가능해진다.

  • PDF

집전전류에 의한 열원을 고려한 경량 판토그래프 상부암 혼성구조체의 열 특성 분석 연구 (Thermal Characteristics Analysis of Upper Arm Hybrid Structure of Lightweight Pantograph Considering Heat Source by Collecting Current)

  • 박찬배;정거철
    • 한국철도학회논문집
    • /
    • 제20권4호
    • /
    • pp.466-473
    • /
    • 2017
  • 최근 국내 철도 관련 기관에서 고속집전용 판토그래프를 개발하고 있으며, 이는 상부암의 경량화를 위하여 기존의 강재(Steel) 대신에 CFRP(Carbon Fiber Reinforced Plastics)와 알루미늄의 혼성구조체를 적용한 구조를 갖는다. KTX-산천 열차의 경우, 한 대의 판토그래프를 통해서 열차에 필요한 모든 전력을 공급해야 하는 동력집중식이므로 판토그래프는 큰 통전 용량을 가져야 한다. 하지만, 알루미늄 파이프의 열적 특성 분석 없이 통전 용량을 증대시키기 위하여 파이프의 두께를 임의로 증가시키게 되면 상부암의 무게 증가로 집전성능의 저화를 초래할 수 있다. 따라서, 본 논문에서는 KTX-산천 열차의 정지 상태에서 수전 시 판토그래프 상부암 혼성구조체를 이루는 알루미늄 파이프의 시간 경과에 따른 온도 특성 변화를 열해석을 통하여 분석하고, 제시된 판토그래프 통전 용량에 부합되는 알루미늄 파이프의 최소 두께의 적정성을 검토하고자 한다.

상수도용 유리섬유복합관의 구조적 거동특성 및 안전성 평가 (Characteristics of Structural Behavior and Safety Estimation of Water Supply GFRP Pipe)

  • 이보베;이승식;주형중;윤순종
    • Composites Research
    • /
    • 제22권3호
    • /
    • pp.1-8
    • /
    • 2009
  • 이 논문에서는 강수도관에 사용되는 GFRP관의 구조적 거동에 대한 실험적, 이론적 연구의 결과를 제시하였으며, 관의 단면은 두개의 CFRP층과 그 층 사이의 폴리머 모르타르 층으로 구성되어 있다. GFRP는 경량성, 부식저항성, 관의 내부 표면조도 향상, 유연성 등이 뛰어나기 때문에 강수 계통의 관으로써 시용이 계속적으로 증가되고 있는 추세이다. 그러므로 더욱 최적화된 구조설계법이 개발되어야 한다. 이 연구에서 CFRF관의 하중-원주방향변위에 대한 특성을 이론적, 해석적으로 조사 하였으며 추가적으로 원강성시험을 하였다. 시험결과를 이론적, 해석적 연구결과와 비교하였으며, 원주방향의 변위가 5% 이내에서는 결과들이 서로 잘 일치하였다. 결과적으로 상수도 계통에 사용되는 CFRP관은 업계의 요구조건을 충분히 만족함을 알 수 있었다.

직각 흡음체 설치 경량방음터널의 토출소음 저감효과 분석 (Analysis of Reduction Effect on Noise Discharge from Lightweight Soundproof Tunnels Installed with Lateral Sound-absorbing Panels)

  • 정영도;안동욱;노명현
    • 복합신소재구조학회 논문집
    • /
    • 제7권1호
    • /
    • pp.19-24
    • /
    • 2016
  • Most of the soundproof tunnels generate significant discharge noise through their inlets and outlets so that the length of the tunnel has been extended frequently than required to minimize the effect on such discharge noise. Thus, in this paper, we investigate reduction capability of discharge noise from the sound proof tunnel installed with lateral sound-absorbing panels on the partitioned truss members in the longitudinal direction of the tunnel. In conclusion, noise field analysis results shows that the sound proof tunnels with lateral sound-absorbing panels have an effect on discharge noise abatement and thereby tunnel's length reduction.

The influence of production inconsistencies on the functional failure of GRP pipes

  • Rafiee, Roham;Fakoor, Mahdi;Hesamsadat, Hadi
    • Steel and Composite Structures
    • /
    • 제19권6호
    • /
    • pp.1369-1379
    • /
    • 2015
  • In this study, a progressive damage modeling is developed to predict functional failure pressure of GRP pipes subjected to internal hydrostatic pressure. The modeling procedure predicts both first-ply failure pressure and functional failure pressure associated with the weepage phenomenon. The modeling procedure is validated using experimental observations. The random parameters attributed to the filament winding production process are identified. Consequently, stochastic simulation is conducted to investigate the influence of induced inconsistencies on the functional failure pressures of GRP pipes. The obtained results are compared to realize the degree to which random parameters affect the performance of the pipe in operation.

부식기반 복합고장을 고려한 가스배관의 신뢰도 평가 (An Assesment of the Gas Pipeline Reliability Using Corrosion based Composite Failure)

  • 김성준;김도현;김우식;김영표;김철만
    • 품질경영학회지
    • /
    • 제47권4호
    • /
    • pp.739-754
    • /
    • 2019
  • Purpose: The purpose of this paper is to develop a reliability estimation procedure for the underground gas pipeline in the presence of corrosion defects. Methods: Corrosion is one of the major causes of the gas pipeline failure. Several failure forms caused by corrosion have been studied. Among them, small leak and burst are considered in this paper. The composite failure of the two is defined by limit state function, and it is expressed with pipe parameters. Given a modified corrosion dataset, in order to obtain reliability estimations, the method of first order and second moment is adopted because of its simplicity. The computation processes are conducted with MATLAB coding. Results: According to numerical results, the probability of composite failure is affected by both small leak and burst. In particular, when corrosion depth stays at low level, it is consistent with the probability of burst failure. On the contrary, it is more influenced by the small leak failure as corrosion depth is increasing. In such case, the probability of composite failure is fast approaching to the safety limit. Conclusion: By considering the composite failure, more practical predictions of remaining life can be obtained. The proposed method is useful for maintenance planning of the underground gas pipeline.

고성능 팽창재를 이용한 FRP 긴장재의 정착에 관한 연구 (A Study on the Behavior of Non-Metallic Anchoring System for FRP Tendons)

  • 김덕현;조병완;이계삼;김영진
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2001년도 춘계학술발표대회 논문집
    • /
    • pp.23-28
    • /
    • 2001
  • Since non-corrosive Fiber Reinforced Polymer(FRP) tendons have been in increasing use for underground and coastal structures constantly contacted with fresh water or sea water because of their superiority to metallic ones in corrosion-resistance, new non-metallic anchoring system for FRP tendons has been developed and investigated to verify the effectiveness of tendon force, which consist of mainly FRP pipes and Highly Expansive Mortar(HEM). The major factors considered in this experiment were expansive pressures of HEM during its hydration, sleeve lengths and types, and anchoring methods of tendon. New anchoring system were investigated from the pull-out tests. The pull-out procedures of the FRP tendons in the various pipe filled with HEM were analyzed and improved ideas were suggested to develop novel non-metallic anchoring system for FRP tendons The pull-out tests for the FRP tendon and new non-metallic anchoring system were conducted. The results show that non-metallic anchoring system for the FRP tendon has been more stablized due to the gradual expansive pressrure of HEM, as tims goes. Since tile lower stiffness of FRP pipes causes the weakness of anchoring force, it requires the increase of stiffness using a carbon fiber or an increased section area.

  • PDF

강관철근을 보강한 합성기둥의 3시간 가열 후 잔존 압축력 실험평가 (Evaluation of Residual Strength and Behavior of Reinforced STG 800 Welded Square Composite Column after Fire 3 Hour)

  • 김선희;염경수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 가을 학술논문 발표대회
    • /
    • pp.242-243
    • /
    • 2021
  • The concrete inside the steel tube of CFT columns enables them to have great strength and ductility. CFT columns are also excellent in fire-resistance because explosive heat upon a fire can be contained in the tube by the concrete debris. However, the studies to evaluate the residual strength of CFT columns after a fire have not been conducted enough. The studies to evaluate the residual strength of CFT columns after a fire are indispensable because it is the barometer of the damage of composite columns caused by a fire and the degree of repair and reinforcement work for the columns after a fire. Accordingly, the purpose of this study is to evaluate the deterioration of load capacity and structural behavior of square CFT columns with the same shapes and boundary conditions before and after a fire. The study also evaluates the influential factors of the CFT columns reinforced to secure the residual strength after a fire.

  • PDF

대구경 파이프용 필라멘트 와인딩을 위한 UV 경화시스템 (UV-Curing System for the Filament Winding of Large Diameter Pipe)

  • 최재원;김세일;정용찬;전병철
    • 청정기술
    • /
    • 제16권4호
    • /
    • pp.245-253
    • /
    • 2010
  • 대구경 강관 표면 보호를 위해 사용되는 필라멘트 와인딩 공정에 불포화 폴리에스터 (unsaturated polyester: UP)를 이용한 자외선 (ultraviolet) 경화 방법을 적용하고자, UP를 이용한 최적의 UV 경화 조건을 찾아보았다. 기존의 유기계 과산화물을 개시제로 사용한 열경화 방법에서는 개시제의 불안정성, 휘발성 유기물 발생, 열에 약한 대상물질의 변형 등 문제점이 발생하므로 이에 대한 개선책으로 UV 경화방법을 시도하였다. UV 경화에 사용되는 다양한 개시제 중에서 비교적 침투력이 높아서 두꺼운 고분자 층 형성이 가능한 개시제 2 종(Irgacure 819 및 Darocure 1173)을 선정하여 이들의 조합비율에 따라 경화된 UP 고분자에 대한 열역학적, 기계적 물성을 비교 분석하여 우수한 경화조건 (개시제 함량 1.5 phr, 혼합 비율 1:1.2, UV 램프로는 갈륨램프)을 찾아내었다. 또한 UP 광경화수지의 경도, 충격강도, 굴곡강도 향상을 위해 유리섬유를 수지 내에 적층하여 복합재료를 제조하고 이들의 특성을 비교한 결과 충격강도가 매우 향상되었다.

금속-폴리에틸렌 복합관에 대해서 Marston-Spagler이론과 유한요소해석에 의해 구해진 뒤채움하중의 비교에 관한 연구 (A Study on the Comparison of the Backfill Loads Obtained by the Marston-Spangler에s Theory and by the Finite Element Analysis for the Metal-Polyethylene Composite Pipes)

  • 정진호
    • 한국지반공학회지:지반
    • /
    • 제14권5호
    • /
    • pp.89-110
    • /
    • 1998
  • 본 논문은 금속-폴리에틸렌 복합관을 고랑에 매설하고 뒤채움할 경우 관에 작용하는 뒤채움 하중에 관한 연구로서 지금까지 널리 이용하고 있는 Marston-Spangler 이론을 유한요소 해석에 의해서 검토하였다. 유한요소 해석 결과의 신뢰성은 현장 매설관 실험에 의해서 검증하였다. 즉, 현장에서 실물 크기의 관을 매설한 후 뒤채움 높이를 증가시켜 가면서 측정한 관에 작용하는 하중과 관의 변형량은 유한요소 해석의 결과와 비교적 잘 일치함을 확인하였다. 그리고 1.0m 이하의 관경, 관경의 3.0배 이하의 고랑폭, 4.0m 이하의 뒤채움 높이 범위내에서, 뒤채움흙의 종류, 뒤채움 높이, 고랑폭 및 관경 등이 매설관에 작용하는 하중에 대해 어떠한 영향을 끼치는지를 유한요소 해석과 Marston-Bpangler 이론에 의해서 검토 비교하였다. 연구 결과로서 금속-폴리에틸렌 복합관에 작용하는 하중은 Marston-Spangler 이론에 의해서 계산하는 것이 합리적이라는 사실을 확인하였으며 Marston-Spangler 이론을 적용할때 설계계수 Inp 값으로 0.0을 취할 것을 제안하였다. 그리고 Marston-Spangler 뒤채움흘의 hi 값은 유한요소 해석에서 Duncan 흙 모텔의 SC 값, SM 흙에 대해서는 각각 0.13, 0.15로 할 것이 권장된다. 뒤채움 높이에 따른 하중비. WMf/WFBM의 변화는 좁은 고랑에서는 미미하나 넓은 고랑에서는 뒤 채움 높이가 증가할수록 증가하는 경향을 나타낸다. 또한 이 하중비는 관경이 커질수록 좁은 고랑 에서는 증가하는 반면 넓은 고랑에서는 감소한다. 그리고 뒤채움흙의 다짐도가 클수록 하중비는 감 소하며 SM 흙이 SC흙보다 더 큰 하중비를 나타낸다.식으로 모델 화하였다. 일치하는 것으로 나타났다. 또한 y/D=0.2 이하에서 CLM 방법의 적용성이 입증되었다.)히 현상적관찰(現象的觀察)과 경험적추리(經驗的推理)로서 설명(說明)되었기 때문에 현대의학(現代醫學)(서양의학(西洋醫學))과 같은 조직해부학(組織解剖學) 및 생화학적(生化學的)인 이론(理論)과는 상위(相違)한 점(點)이 많다. 더욱이 음양오행설(陰陽五行說)이라는 다분(多分)히 형이상적(形而上的)인 학(學) 사유(思惟)로서 관찰추리(觀察推理)되였기 때문에 현대의학(現代醫學)과의 비교설명(比較說明)이 거의 불가능(不可能)하며 또한 한의학이론(韓醫學理論)의 과학적근거제시(科學的根據提示)도 현재(現在)로서는 어려운 형편(形便)이다. 그러나 이 의학(醫學)은 이미 2,000여년간(餘年間) 동양(東洋)에서 전래(傳來)한 경험의학(經驗醫學)으로서 동양인(東洋人)들은 이 의학(醫學)으로 소화계질환(消化系疾患)을 포함(包含)한 여러 가지 인간(人間)의 질병(疾病)을 치료(治療)해 왔고 현재(現在)도 이 의학(醫學)으로 치료(治療)를 하고 있고 실제적(實際的)으로 많은 치효(治效)를 보고 있는 것이다. 그러므로 이 의학(醫學)속에는 아직도 현대과학(現代科學)으로서 해명(解明)되지 못하는 어떤 요소(要素)들이 깃들여 있는 것이 확실(確實)하며 이것을 밝혀내기 위해서 우리 의학자(醫學者)들은 이 의학(醫學)에 관(關)한 모든 것을 연구(硏究)해 보아야 한다. 이런 뜻에서 본고찰(本考察)은 한방(漢方)의 역대제문헌(歷代諸文獻)을 섭렵(涉獵)하여 소화계질환(消化系疾患)에 관(關)한 제이론(諸理論)들을 발췌(拔萃), 한방(漢方)에서 보는 (1) 소화기관(消化器官)의 생리(生理) (2) 병리(病理), 증후(證候) (3)

  • PDF