• Composites Research
• /
• v.34 no.2
• /
• pp.88-95
• /
• 2021

VARTM (Vacuum-assisted resin transfer molding) process is a low-cost process technology and affiliated with OoA (Out of Autoclave). Besides, it has been widely used in various fields. However, because of its lower quality than the autoclave process, it isn't easy to apply the VARTM process to the aerospace industry, which requires high reliability. The main problem of the VARTM process is the loss of mechanical properties due to the low fiber volume fraction and high void content in comparison to the autoclave. Therefore, many researchers have studied to reduce void and increase fiber volume fraction. This study examines whether the method of controlling atmospheric pressure could increase the fiber volume fraction and reduce void during the resin impregnation process. Reliability evaluation was confirmed by compressive strength test, fiber volume fraction analysis, and optical microscopy. As a result, it was confirmed that increasing the atmospheric pressure step by step in the VARTM process of impregnating the preform with resin effectively increases the fiber volume fraction and reduces void.

• Composites Research
• /
• v.34 no.1
• /
• pp.8-15
• /
• 2021

In the shipbuilding and marine industry, as a technology for reducing the weight of parts to reduce energy and improve operational efficiency of ships is required, a method of applying fibers-reinforced composites which is high-strength lightweight materials, as part materials can be considered. In this study, the possibility of applying fibers-reinforced composites to the pipe support clamps was evaluated to reduce the weight of LNGC. The fibers-reinforced composites were manufactured using carbon fibers and glass fibers as reinforcing fibers. Through the computer simulation program, the properties of the reinforcing materials and the matrix materials of the composites were inversely calculated, and the performance prediction was performed according to the change in the properties of each fiber lamination pattern. In addition, the structural analysis of the clamps according to the thickness of the composites was performed through the finite element analysis program. As a result of the study, it was confirmed that attention is needed in selecting the thickness when applying the fibers-reinforced composites of the clamp for weight reduction. It is considered that it will be easy to change the shape of the structure and change the structure for weight reduction in future supplementary design.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.4
• /
• pp.25-31
• /
• 2011

In this study, the experimental design methodology was applied to optimize 1,4-dioxane treatment in E-beam process. Main factor was mathematically described as a function of parameters 1,4-dioxane removal efficiencies(%), TOC removal efficiencies(%) modeled by the use of the central composite design(CCD) method among the response surface methodology(RSM). Concentration of 1,4-dioxane is designated as "$x_1$" and Irradiation intensity is designated as "$x_2$". The regression equation in coded unit between the 1,4-dioxane concentration and removal efficiencies(%) was $y=71.00-10.85x_1+20.67x_2+{1.53x_1}^2-{7.92x_2}^2-1.23x_1x_2$. The regression equation in coded unit between the 1,4-dioxane concentration and TOC removal efficiencies(%) was $y=44.48-13.25x_1+9.54x_2+{5.43x_1}^2-{1.35x_2}^2+4.45x_1x_2$. The model predictions agreed well with the experimentally observed results $R^2$(Adj) over 90%. Toxicity test using algae Pseudokirchneriella Subcapitata showed that the inhibition was reduced according to increasing an E-beam irradiation.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.320-325
• /
• 2021

In this study, an optimization for the production of water emulsion was designed by adding an extract of wheat sprout, which is known to contain a large amount of antioxidants. The central composite design of reaction surface analysis method (CCD-RSM) was used for the optimization process. The amount of emulsifier, emulsification time, and added amount of wheat sprout extract were selected as independent variables based on our preliminary experiments. The mean droplet size (MDS), viscosity, and emulsion stability index (ESI) were set as the responses to evaluate the stability of the emulsion. For each independent variable, the P-value and coefficient of determination were evaluated to verify the reliability of the experiments. From the result of CCD-RSM, optimum conditions for the emulsification were determined as 23.6 min, 7.7 wt.%, and 3.9 wt.% for the emulsification time, amount of emulsifier, and amount of sprout, respectively. From the optimized condition obtained, MDS, viscosity, and ESI after 7 days from reaction were estimated as 252.3 nm, 616.7 cP, and 88.7%, respectively. The overall satisfaction was 0.9137, which supported the validity of the experiments, and the error rate was measured at 0.5% or less by advancing the experiments. Therefore, an optimized process for producing an emulsion by adding the malt extract was designed by the CCD-RSM.

• Composites Research
• /
• v.33 no.6
• /
• pp.365-370
• /
• 2020

The icing formation at aircraft occur problems such as increasing weight of the body, fuel efficiency reduction, drag reduction, the error of sensor, and etc. The viscosity of polyurethane (PU) topcoat was measured at 60℃ in real time to set the pre-curing time. SiO2 nanoparticles were dispersed in ethanol using ultra-sonication method. The SiO2/ethanol solution was sprayed on PU topcoat that was not cured fully with different pre-curing conditions. Surface roughness of SiO2/PU nanocomposites were measured using surface roughness tester and the surface roughness data was visualized using 3D mapping. The adhesion property between SiO2 and PU topcoat was evaluated using adhesion pull-off test. The static contact angle was measured using distilled water to evaluate the hydrophobicity. Finally, the pre-curing time of PU topcoat was optimized to exhibit the hydrophobicity of SiO2/PU topcoat.

• Composites Research
• /
• v.34 no.4
• /
• pp.233-240
• /
• 2021

VaRI(Vacuum assisted Resin Infusion) process, which is cost effective and suitable for manufacturing large-sized composites, is an OoA(Out-of Autoclave) process. For rapid resin infusion in the VaRI process, a DM(distribution media) is placed on top of the fabric. The resin is rapidly supplied in plane direction of the fiber along the DM, and then the supplied resin is impregnated in the out-of-plane direction of fiber. It is difficult to predict the flow of resin because the flow of in-plane direction and the out-of-plane direction occur together, and a 3D numerical analysis program is used to simulate the resin infusion process. However, in order to analyze in 3D, many elements are required in the out-of-plane direction of fabric. And the product size is larger, the longer the analysis time needs. Therefore, in this study, a method was suggested to reduce the time required for flow analysis by simplifying the 3D flow analysis to 2D flow analysis. The usefulness was verified by comparing the 3D flow analysis with the simplified 2D flow analysis at the same conditions. The filling time error was about 7% and the reduction of flow analysis time was about 95%. In addition, by utilizing the constant difference in the flow front between the top, middle, and bottom of the fabric of the 3D analysis, the flow front of the top, middle, and bottom of the fabric can be also predicted in the 2D flow analysis.

• Journal of Environmental Impact Assessment
• /
• v.30 no.4
• /
• pp.258-269
• /
• 2021

The purpose of this study is to establish a system to evaluate the ecological soundness of the Geum river basin. The study target area is 14 sub-watersheds of the Geum river basin. For the selection of indicators to ensure transparency and consistency of the evaluation indicators, the ecological soundness indicators were secured by using the indicator adjustment method derived in consideration of the intrinsic weight change characteristics between indicators. The index with the greatest impact on the final composite index was identified as the index of the aquatic ecology among the water quantity, water quality, aquatic ecology, and habitat-riparian environment dimensions. As a result of analyzing the ecological health index of the river, the watershed upstream of the dam (based on the Daecheong -dam) was evaluated to be in relatively good condition until 2014 compared to the base year(2008), and the watershed downstream of the dam was evaluated to be in a poor condition. The annual trend of changes in the ecological soundness index on an annual basis is as follows. In the case of Yongdamdam, Yongdamdamdownstream, Bocheong-chun, Daechungdam, Daechungdamdownstream, and Nonsancheon, although there are differences by time period, the soundness index is in declining. On the other hand, Mujunamdaecheon, Yeongdongcheon, and Gapcheon were evaluated to have improved soundness, while Chogang, Daechungdamupstream, Mihocheon, Gongjugeumgang, and Geumgangestuary were evaluated to deteriorate again after soundness was improved.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.199-208
• /
• 2021

Purpose: The purpose of this study was to compare and evaluate the masking ability of three types of high translucent zirconia according to the various thicknesses and backgrounds. Materials and Methods: Using three types of high-translucency zirconia (Ceramill zolid fx white, Ceramill zolid ht+ white, Ceramill zolid ht+ preshade A2), 10 cylindrical specimens were fabricated in 10mm diameter and each with four thicknesses (0.6 mm, 1.0 mm, 1.5 mm, 2.0 mm), respectively by CAD/CAM method. The background was 10 mm in diameter and 10 mm in thickness. A1, A2, A3 flowable resin backgrounds, blue-colored core resin background, and Ni-Cr alloy background were prepared, and black, white backgrounds provided by the spectrophotometer manufacturer (x-rite, Koblach, Austria) were used. zirconia specimens and the background specimen were stacked to measure L, a^*, b^* with Spectrophotometer (Color i5, x-rite, Koblach, Austria) and the ΔE value with the other background is calculated. The Calculated mean ΔE values were compared based on perceptibility threshold 1.0 and acceptability threshold 3.7. Nonparametric tests such as Kruskal-Wallis test were performed to verify statistical significance (α = 0.05). Results: There was a significant difference in the mean ΔE value according to the zirconia type, background and thickness change (P = 0.000). Conclusion: According to the results of this study, the pre-colored high-translucent zirconia can obtain the desired zirconia shade when it is restored on teeth, composite resins, and abutments except for the blue resin core.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.165-178
• /
• 2022

In this study, to explore the psychological and biosocial characteristics of the temperament and character's latent profile group, first, the latent group was identified with the seven variables of the Temperament and Character Inventory(TCI), and second, the difference between the psychological and biosocial characteristics of three identified latent groups. A total of 287 university students participated, and the latent groups was identified through latent profile analysis, a human-centeted statistical method, using Cloninger's TCI, Cognitive Emotion Regulation Questionnaire(CERQ), Positive Affect and Negative Affect Schedule(PANAS), Composite Scale of Moriningness(CSM), Pittsburgh Sleep Qulity Index(PSQI), and Satisfaction With Life Scale(SWLS). As result, first, three latent groups were identified through latent profile analysis using the seven variables of TCI. second, significant differences were identified in CERQ, PANAS, which are psychological variables, CSM, PSQI, and SWLS, which are biosocial variables among the latent groups. In conclusion, the importance of Self-Directedness(SD), a character factor that can be developed rather than Harm-Avoidance(HA), a temperament factor from nature, was confirmed. And the necessity of follow-up studies on psychological and biosocial variables for adaptive and mature personality was discussed.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.1
• /
• pp.13-25
• /
• 2021

Hoseonmu belongs to the genre of a composite of song, music, and dance. At that time, there was no widely known record of Hoseonmu in Baekje, but it is clear that it was popular enough to be invited to Changan by Emperor Yang of Sui. The musical instruments, songs, and dances were analyzed through the research method of literature and the content of the Hoseonmu version was established. The setting of the stage for the performance of Baekje instrumental music reveals its characteristics through sabangak from Gigaku in the neighboring countries. The stage for Hoseonmu was set up utilizing the creation of the imperial performance stage in the Baekje instrumental music. In particular, Hoseonmu has two types: heavenly and earthly. The heavenly Hoseonmu can be found on the wall of the Cave No. 220 formed in the Chodang (618-707) era. They include Dongbang Pharmacopoeia jingbian and Western Paradise jingbian. Hoseonmu would have chosen to be the fast-paced spinning dance. Motions for Hoseonmu could be set up through them. Meanwhile, Mimaji's instrumental dance is presented. Six dancers appear in two turns of the performance. Four dancers in front row and other two in the back are dressed up as hunters, wearing goblin masks, and holding flowering plum tree branches in their right hands. Through this, the movements and costumes of Hoseonmu are reproduced in more detail. Various sectors of education, theater, dance, and tourism in the Hoseonmu contents of Baekje instrumental music contributed to the Korean Wave.