• Steel and Composite Structures
• /
• v.35 no.4
• /
• pp.599-609
• /
• 2020

The tension-only braced frames (TOBFs) are widely used as a lateral force resisting system (LFRS) in low-rise steel buildings due to their simplicity and economic advantage. However, the system has poor seismic energy dissipation capacity and pinched hysteresis behavior caused by early buckling of slender bracing members. The main concern in utilizing the TOBF system is the determination of appropriate performance factors for seismic design. A formalized approach to quantify the seismic performance factor (SPF) based on determining an acceptable margin of safety against collapse is introduced by FEMA P695. The methodology is applied in this paper to assess the SPFs of the TOBF systems. For this purpose, a trial value of the R factor was first employed to design and model a set of TOBF archetype structures. Afterwards, the level of safety against collapse provided by the assumed R factor was investigated by using the non-linear analysis procedure of FEMA P695 comprising incremental dynamic analysis (IDA) under a set of prescribed ground motions. It was found that the R factor of 3.0 is appropriate for safe design of TOBFs. Also, the system overstrength factor (Ω₀) was estimated as 2.0 by performing non-linear static analyses.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.836-843
• /
• 2014

Obesity, a condition in which an abnormally large amount of fat is stored in adipose tissue, causing an increase in body weight, has become a major public health concern worldwide. The purpose of this study was to optimize the process for fermented milk for the production of a functional product with an anti-obesity effect by using Lactobacillus plantarum Q180 isolated from human feces. We used a 3-factor, 3-level central composite design (CCD) combined with the response surface methodology (RSM). Concentration of skim milk powder (%, $X_1$), incubation temperature ($^{\circ}C$, $X_2$), and incubation time (h, $X_3$) were used as the independent factors, whereas pH (pH, $Y_1$), anti-lipase activity (%, $Y_2$) and anti-adipogenetic activity (%, $Y_3$) were used as the dependent factors. The optimal conditions of fermented milk for the highest anti-lipase and anti-adipogenetic activity with pH 4.4 were the 9.5% of skim milk powder, $37^{\circ}C$ of incubation temperature, 28 h of incubation time. In the fermentation condition, the predicted values of pH, anti-lipase activity and anti-adipogenetic activity were 4.47, 55.55, and 20.48%, respectively. However, the actual values of pH, anti-lipase activity and anti-adipogenetic activity were 4.50, 52.86, and 19.25%, respectively. These results demonstrate that 9.5% of skim milk powder and incubation at $37^{\circ}C$ for 28 h were the optimum conditions for producing functional fermented milk with an anti-obesity effect.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.3
• /
• pp.364-374
• /
• 2013

Monacolin K and yellow pigment, produced by Monascus sp., have each been proven to be beneficial compounds as antihypercholesterolemic and anti-inflammation agents, respectively. However, citrinin, a human toxic substance, was also synthesized in this fungus. In this research, solidstate fermentation of M. purpureus TISTR 3541 was optimized by statistical methodology to obtain a high production of monacolin K and yellow pigment along with a low level of citrinin. Fractional factorial design was applied in this study to identify the significant factors. Among the 13 variables, five parameters (i.e., glycerol, methionine, sodium nitrate, cultivation time, and temperature) influencing monacolin K, yellow pigment, and citrinin production were identified. A central composite design was further employed to investigate the optimum level of these five factors. The maximum production of monacolin K and yellow pigment of 5,900 mg/kg and 1,700 units/g, respectively, and the minimum citrinin concentration of 0.26 mg/kg were achieved in the medium containing 2% glycerol, 0.14% methionine, and 0.01% sodium nitrate at $25^{\circ}C$ for 16 days of cultivation. The yields of monacolin K and yellow pigment were about 3 and 1.5 times higher than the basal medium, respectively, whereas citrinin was dramatically reduced by 36 times.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.233-241
• /
• 2005

The paper is presented experimental study results on bond stress between profiled steel and concrete in Profiled SPC(Profiled Steel Plate Concrete) rectangular steel tubes through an experimental program in which 13 pull-out specimens were tested. Advantages and class of composite members and current problems of construction work are noted, past research of PSSC is described. An experimental study is described and evaluated. The bond capacity is interrelated with slip at the steel concrete interface. The factors influencing the mechanism of bond stress transfer were the cross section shape, length/diameter, diameter/thickness and environmental parameters (temperature, moisture). The results of experimental program indicated that the force transfer could be characterized into two regions The first region was governed by bond with no relative slip between the profiled steel and concrete. The second region occurs after the chemical debonding. Bond stress transfer in this region was governed by frictional resistance between profiled steel and concrete and cross section shapes. The important factors influencing the magnitude of frictional resistance are the profiled steel shapes, length/diameter and environmental parameters. (temperature, moisture)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.479-489
• /
• 1989

The $J_{k}$ integral method for determining mixed mode stress intensity factors separately in the cracked anisotropic plate is developed. Stress intensity factors are indirectly determined from the values of $J_{1}$ and $J_{2}$. The $J_{2}$ integral can be evaluated efficiently from a finite element solution, neglecting the contribution from the portion of the integration contour along the crack faces, by selecting the integration contour in the vicinity of the crack tip. Using functions of a complex variable, the complete relations between $J_{1}$, $J_{2}$ and $K_{I}$ , $K_{II}$ for anisotropic materials are derived conveniently by selecting narrow rectangular contours shrinking to the crack tip. Compared to the existing path independent integral methods, the present method does not involve calculating the auxiliary solution and hence numerical procedures become quite simple. Numerical results to various problems are given and demonstrate the accuracy, stability and versatility of the method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.285-285
• /
• 2016

설계홍수량 산정 시, 지점강우량을 대상 유역 내 면적강우량으로 환산하기 위해 면적우량환산계수(ARF, Areal Reduction Factors)를 적용한다. ARF를 산정하는 방법은 크게 면적고정형법(Fixed-Area Method)과 호우중심형법(Storm-Centered Method)로 나뉜다. 면적고정형법은 현재 국내 하천설계기준에서 활용하고 있는 방법이지만, 공간적 관측밀도의 제약으로 정확한 ARF 산정에는 한계가 있다. 또한 연 최대치계열의 독립적인 빈도해석을 통해 지점강우량과 면적강우량을 산정하므로 동시간(Synchronized)에 발생하는 강우 사상이라고 볼 수 없기 때문에 산정된 ARF는 실제 강우사상으로부터 산정된 값과 편차를 보인다. 반면 호우중심형법은 각각의 강우사상을 분석 대상 유역 중심에 공간전이 시켜 최대 강우량이 발생하도록 하는 방법으로, 레이더 강우 자료를 활용하면 현실적 ARF값의 산정이 가능해진다. 레이더 강우는 기상청에서 제공하는 2007-2012년 홍수기(6-9월)의 10분 단위 단일편파 전국합성 레이더 자료를 활용하였으며, 대상지역으로는 한강 권역을 선정하였다. 그러나 기상청 레이더강우 자료의 경우 가용기간이 아직까지 충분하지 않아 다양한 빈도의 강우사상을 확보하는데 한계가 있어, 보조적으로 한강 권역의 지상강우 관측 자료를 수집하여 높은 재현기간의 강우사상이 부족한 문제점을 해결하고자 하였다. 산정된 레이더 및 지상강우 호우중심형 ARF는 통계적 분석을 통해 비초과확률 90%, 95%의 값을 추출하였으며, 지속시간 1시간, 3시간, 6시간, 12시간, 24시간과 재현기간 0~10년, 10~20년, 20~50년, 50~80년, 80~100년에 대한 호우중심형 ARF 회귀상수를 제시하였다. 비초과확률 95%에서 기존 국토해양부(2011)에서 제시된 ARF와 호우중심형 ARF는 대체로 유사한 경향을 보이고 있었으나, 지속시간이 비교적 긴 12시간, 24시간에서는 호우중심형이 기존 ARF보다 다소 작게 산정되는 패턴을 보이고 있어 설계적용 시 유의해야 할 것으로 사료된다.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.2
• /
• pp.287-295
• /
• 2019

Objectives: The purpose of this study was to investigate the factors affecting subjective oral symptoms according to the gender of youth from multi-cultural families in Korea using data from the 14th (2018) Korean Youth Health Behavior Survey. Methods: The independent variables used in this study consisted of gender and sweet drink intake. The dependent variable was experience of subjective oral symptoms. Compensation variables consisted of general characteristics of school type, academic performance, economic status, drinking status, smoking status, and number of tooth brushings day before. The subjects of the study were 835 children of multi-cultural families whose parents were foreigners. All statistical analyses were performed by complex samples cross-tabulation analysis and complex samples logistic regression analysis. Statistical analysis was performed using the PASW statistical package 21.0 (Statistical Packages for Social Science Inc., Chicago, IL, USA). A significance level of 0.05 was used for statistical significance. Results: The composite sample logistic regression analysis showed that there was a statistically significant difference between gender and intake of sweet drinks in experience of subjective oral symptoms. Conclusions: These results suggest that factors influence subjective oral symptoms in Korean multi-cultural adolescents. Therefore, I hope that they will be used as basic data for the introduction and development of a customized oral health education program for improving oral health of multi-cultural adolescents.

• Journal of muscle and joint health
• /
• v.28 no.2
• /
• pp.174-182
• /
• 2021

Purpose: This study is a secondary data analysis study to identify factors related to the quality of life of people aged 65 y or older, according household type. Methods: In 2019, the study extracted the data from the elderly participants (65 y of age or older) from G province Community Health Survey. The data were compiled and analyzed in a composite sample. Results: The quality of life was lowest among single people, grandparents-grandchildren (F=39.88, p<.001). Variables that significantly influenced quality of life in single-person households were basic security(β=-.03, p=.002), high-risk drinking (β=.04, p=.002), number of day to walk (β=.01, p<.001), diabetes mellitus (β=-.03, p<.001), depression (β=-.02, p<.001), and contact frequency (β=.00, p<.001). Variables that significantly influenced grandparents-grandchildren households were basic security (β=.03, p<.001), smoking(β=-.02, p<.001), number of day to walk (β=.00, p<.001), hypertension (β=-.01, p=.009), diabetes mellitus (β=-.04, p<.001), cognitive impairment (β=-.02, p<.001), depression(β=-.02, p<.001), contact frequency (β=.01, p<.001), and neighborhood trust (β=.02, p<.001). Conclusion: In this study, there were differences in health-related quality of life for each type of household, and various support systems are needed in their social networks to suit their characteristics.

• Steel and Composite Structures
• /
• v.43 no.6
• /
• pp.821-837
• /
• 2022

This research is devoted to study the effects of humidity and temperature on the bending behavior of functionally graded (FG) ceramic-metal porous plates resting on Pasternak elastic foundation using a quasi-3D hyperbolic shear deformation theory developed recently. The present plate theory with only four unknowns, takes into account both transverse shear and normal deformations and satisfies the zero traction boundary conditions on the surfaces of the functionally graded plate without using shear correction factors. Material properties of porous FG plate are defined by rule of the mixture with an additional term of porosity in the through-thickness direction. The governing differential equations are obtained using the "principle of virtual work". Analytically, the Navier method is used to solve the equations that govern a simply supported FG porous plate. The obtained results are checked by comparing the results determined for the perfect and imperfect FG plates with those available in the scientific literature. Effects due to material index, porosity factors, moisture and thermal loads, foundation rigidities, geometric ratios on the FG porous plate are all examined. Finally, this research will help us to design advanced functionally graded materials to ensure better durability and efficiency for hygro-thermal environments.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.115-123
• /
• 2022

Statistics on the occurrence of fires in residential facilities over the past 10 years, show that approximately 40% are fires in apartment buildings. To prevent the spread of fire and support evacuation in apartment housing, the fire resistance performance and performance design of fire doors are becoming more important. This study established a database using 395 quality inspection reports from 2016 to 2020, which passed the fire performance test, and derived the fire door performance-influencing factors through an analysis of the structure (12 elements) of the fire door. As a result, the effect of core material, adhesive, hinge type, blowing agent, etc. was confirmed in 287 pass cases. On the other hand, it was confirmed that the occurrence of flames and crevices in the 108 cases of failure were the major failure factors in the fire door fire resistance test. Fire doors are composed of composite materials to prevent failure of fire resistance performance, and efficient design and quality control are required through standardization of components.