• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.2
• /
• pp.67-74
• /
• 2009

Injection molding have been used for manufacturing various fields of automotive interior trims for years. The demands on the injection molding technique are grown with the further development of the automobile technique and the design presentations for cost reduction and environment-friendly. This paper shows that multi-component injection conditions are different from general injection, also shows how to optimize part design and mold design and how to manufacturing through the efficient use of multi-component injection in development process using core back system. To fulfill this purpose, all influential process parameters related to the quality of automobile parts were analyzed in terms of the correlation between them. Base on that, a innovative process will be developed by injection engineers to implement it in practice.

• Transactions of Materials Processing
• /
• v.24 no.6
• /
• pp.418-425
• /
• 2015

Based on eco-friendly advantages and the enhanced development in the chemical and physical characteristics, liquid silicone rubber (LSR) is widely used in producing precision parts in the automotive, medical, electronics, aeronautical and many other industries. In the current work, a thermoplastic-thermoset multi component injection molding (MCM) was developed for a waterproof automotive connector housing using PBT and LSR resins. Measurements of the rheological characteristics of PBT and LSR were made to improve the reliability of the numerical analysis for the multi component injection process. With the measured viscosity, pvT and curing data, numerical analysis of the multi cycle injection molding was conducted using simulation software (Sigma V5.0).

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.206.2-206.2
• /
• 2005

• Proceedings of the CALSEC Conference
• /
• 2002.01a
• /
• pp.474-478
• /
• 2002

컴포넌트 기반 개발(CBD :Component Based Development)의 확신에 따른 컴포넌트 측정 모델의 구축 컴포넌트 기반 개발과 기존 객체 지향 기반 개발 간의 연관성과 상호 보완성 파악 컴포넌트의 이점 극대화를 위한 컴포넌트 측정 모델의 구축(중략)

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.897-902
• /
• 2002

Because of rapid evolution of software technique, numerous software professionals have been concerned with component based development methodologies. However, it is hard to find out a systematic technique for the selection of COTS (Commercial Off The Shelf) component in consumer position. Up to date, the major of component quality evaluation is object-oriented metric based evaluation methodology. But this paper present four step process and evaluation criteria based on MCDM (Multiple Criteria Decision Making) technique for optimal COTS component selection in consumer position. We considered funtionality, efficiency, usability based on IS0/IEC 9126 for Quality measurement and executed practical analysis about commercial EJB component in internet. This paper show that the proposed selection technique is applicable to optimal COTS component selection.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.3
• /
• pp.241-253
• /
• 2003

SCA (Software Communication Architecture), which has been adopted as a SDR(Software Defined Radio) Forum standard, provides a framework that successfully exploits common design patterns of embedded systems software. However, the SCA is inadequate as a component framework since it does not explicitly specify (1) a component model that defines how to express a component interface and how to implement it, (2) a package model that defines what and how to package in deployment units, and (3) a deployment model that defines the deployment environment and deployment process. In this paper, we propose a SCA-based component framework for SDR. Specifically, we present (1) a component model that defines a component as a specialized CORBA object that implements object management functionality, (2) a package model exploiting the existing XML descriptors of the SCA, and (3) a deployment model that defines a SCA-based deployment environment, a boot-up process that restores the deployment state, and a deployment process that supports lazy application instantiation and dynamic component replacement.

• The Journal of Korean Association of Computer Education
• /
• v.4 no.1
• /
• pp.27-34
• /
• 2001

Recently. The web-based distance education system becomes generalized so that learners can study without being under the control of time and space. This shows that it is more widely used through Internet in education field. But the previous developed methodology for distance-lecture system has some problems, on the Distance Education. It takes much time and cost. In this paper, the need of the Distance-lecture system to apply component-based developing methodology is suggested to overcome these problems. Also, you can save lots of time and cost because it has the reuse, the convenient availability, and the transplantation of distance-educaton system through component-based developing methodology.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.673-680
• /
• 2001

When the developers develop the software, the cost and time of the software development can be reduced by using blocks that are implemented previously. We call these implemented blocks components. In the early stage of Web-based Instruction, it didn't gain preference in spite of it's benefit of convenience. The main reason is, I think, the lack of generality at the education system which eventually results in unsatisfactory facilities compared with the requirement of teachers and students. And the early systems don't make good use of the plenty data in distributed environment, and don't show so good reliablity due to lack of systematic design and development. In this paper, we suggest WBI developing technology using the concept of WBSE. WBI developing is consist of component of pre-developed education software, integration of component using its reusability, and production of more requirement-satisfactory education software.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.71-77
• /
• 2021

Recently, there is a demand for efficient program development of an IoT application support frameworks considering heterogeneous hardware characteristics. In addition, the scope of hardware support is expanding with the development of neuromorphic architecture that mimics the human brain to learn on their own and enables autonomous computing. However, most existing IoT IDE(Integrated Development Environment), it is difficult to support AI(Artificial Intelligence) or to support services combined with various hardware such as neuromorphic architectures. In this paper, we design an AI component abstract model that supports the second-generation ANN(Artificial Neural Network) and the third-generation SNN(Spiking Neural Network), and implemented an autonomous IoT IDE based on the proposed model. IoT developers can automatically create AI components through the proposed technique without knowledge of AI and SNN. The proposed technique is flexible in code conversion according to runtime, so development productivity is high. Through experimentation of the proposed method, it was confirmed that the conversion delay time due to the VCL(Virtual Component Layer) may occur, but the difference is not significant.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.63-72
• /
• 2005

In this paper we describe interoperability maturity measurement, due to highlight a momentous issue on interoperability between heterogeneous distributed component based systems. it also suggests one of various ways for supporting interoperability between each other different component based systems, that is, using web services based mechanism and also revises 'LISI (Level of information systems interoperability)' model to measure interoperability maturity. We also develop the interoperability questionnaire based on the interoperability factors considered at each phase of component based development process, which is possible to measure interoperability maturity between heterogeneous distributed component systems. Based on revised interoperability maturity model and questionnaire we measure each interoperability maturity on examples of two different implementations, that is, web services and distributed object based mechanism. As a result, we suggest an enhanced interoperability way based on analysing problems af these measured results.