• Earthquakes and Structures
• /
• v.7 no.1
• /
• pp.39-55
• /
• 2014

A modified procedure is presented for assessing the seismic response of elastic non-proportionate multistory buildings. This procedure retains the simplicity of the methodology presented by the author in earlier papers, but it presents higher accuracy in buildings composed by very dissimilar types of bents. As a result, not only frequencies and peak values of base resultant forces are determined with higher accuracy, but also the location of the first mode center of rigidity (m1-CR). The closeness of m1-CR with the axis passing through the centers of floor masses (mass axis) implies a reduced rotational response and it is demonstrated that in elastic systemsa practically translational response is obtained when this point lies on the mass axis.Besides, when common types of buildings are detailed as planar structures under a code load, this response is maintained in the inelastic phase of their response as a result of the almost concurrent yielding of all the resisting bents. This property of m1-CR can be used by the practicing engineer as a guideline to form a structural configuration which will sustain minimum rotational response, simply by allocating the resisting elements in such a way that this point lies close to the mass axis. Inelastic multistory building structures, detailed as above, may be regarded as torsionally balanced multistory systems and this is demonstrated in eight story buildings, composed by dissimilar bents, under the ground motions of Kobe 1995 (component KJM000) and Friuli 1976 (component Tolmezzo E-W).

• Journal of the Korean Electrochemical Society
• /
• v.7 no.1
• /
• pp.44-48
• /
• 2004

The two-component type enzyme amplified amperometric DNA assay is described to use an ambient $O_2$ of the substrate of the DNA labeling enzyme. Although the assay detects DNA only at > 0.5M concentration, a concentration $\~10^6$ fold higher than the sandwich-type enzyme amplified amperometric DNA assay, it can be run with an always available substrate. The assay utilizes screen-printed carbon electrodes (SPEs) which were pre-coated by a co-electrodeposited film of an electron conducting redox hydrogel and a 37-base long single-stranded DNA sequence. The DNA in the electron conducting film hybridizes and captures, when present, the 37-base long detection-DNA, which is labeled with bilirubin oxidase (BOD), an enzyme catalyzing the four-electron reduction of $O_2$ to water. Because the redox hydrogel electrically connects the BOD reaction centers to the electrode, completion of the sandwich converts the film from non-electrocatalytic to electrocatalytic for the reduction of $O_2$ to water when the electrode is poised at 200 mV vs. Ag/hgCl. The advantage or the assay over the earlier reported sandwich type enzyme amplified amperometric DNA assay, in which the amplifying enzyme was horseradish peroxidase, is that it utilizes ambient $O_2$ instead of the less stable and naturally unavailable $H_2O_2$.

• Tuberculosis and Respiratory Diseases
• /
• v.81 no.3
• /
• pp.228-232
• /
• 2018

Background: Chronic bronchitis (CB) is an important phenotype in chronic obstructive pulmonary disease (COPD). The purpose of this study is to evaluate different pattern of COPD assessment test (CAT) score between CB and non-CB patients. Methods: Patients were recruited from 45 centers in Korea, as part of the Korean COPD Subgroup Study cohort. CB was defined when sputum continued for at least 3 months. Results: Total 958 patients with COPD were eligible for analysis. Among enrolled patients, 328 (34.2%) were compatible with CB. The CAT score was significantly higher in patients with CB than non-CB, and each component of CAT score showed a similar result. CB was significantly associated with CAT score when adjusted with age, sex, modified Medical Research Council, and post-bronchodilator forced expiratory volume in 1 second. Each component of CAT score between patients with CB and non-CB showed different pattern according to Global Initiative for Chronic Obstructive Lung Disease grade. Conclusion: CAT score is significantly higher in patients with CB than non-CB. Each component of CAT score was significantly different between two groups.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.4
• /
• pp.315-320
• /
• 2013

Space geodetic techniques can be used to obtain precise shape and rotation information of the Earth. To achieve this, the representative combination solution of each space geodetic technique has to be produced, and then those solutions need to be combined. In this study, the representative combination solution of very long baseline interferometry (VLBI), which is one of the space geodetic techniques, was produced, and the variations in the position coordinate of each station during 7 years were analyzed. Products from five analysis centers of the International VLBI Service for Geodesy and Astrometry (IVS) were used as the input data, and Bernese 5.0, which is the global navigation satellite system (GNSS) data processing software, was used. The analysis of the coordinate time series for the 43 VLBI stations indicated that the latitude component error was about 15.6 mm, the longitude component error was about 37.7 mm, and the height component error was about 30.9 mm, with respect to the reference frame, International Terrestrial Reference Frame 2008 (ITRF2008). The velocity vector of the 42 stations excluding the YEBES station showed a magnitude difference of 7.3 mm/yr (30.2%) and a direction difference of $13.8^{\circ}$ (3.8%), with respect to ITRF2008. Among these, the 10 stations in Europe showed a magnitude difference of 7.8 mm/yr (30.3%) and a direction difference of $3.7^{\circ}$ (1.0%), while the 14 stations in North America showed a magnitude difference of 2.7 mm/yr (15.8%) and a direction difference of $10.3^{\circ}$ (2.9%).

• IE interfaces
• /
• v.12 no.4
• /
• pp.575-585
• /
• 1999

This study develops and operating software for a model plant. The model plant consists of an AS/RS system, two machining centers, an assembly line, and supplementary material handling equipments. Devices of each component are connected with the IBS RT24 DIO 16/16-T I/O module. Each I/O module communicates digital signals with the INTERBUS controller board via SUB-D 9 Connector cable. This study is a previous stage for developing an educational CIM software. Petri Nets is used for modelling the storage/retrieval of the AS/RS system, the flow of workpieces and the assembly line for parts. The operating software is coded with Microsoft Visual $C^{++}$ 5.0 and Interbus Library which is a software driver for the controller board. The operating software can be run on a MS Windows 95. Microsoft Access is used for the implementation of databases for BOM, AS/RS, and parts.

• Korean Journal of Digital Imaging in Medicine
• /
• v.16 no.1
• /
• pp.61-67
• /
• 2014

The demand of cyclotron for PET (positron emission tomography) has rapidly grown as the more use of PET or PET-CT equipment requires the increased amount of radioactive isotopes for clinical positron emission. While research on failure statistics of medical equipment used in medical centers has continued to be done, the analysis and study on failure statistics of cyclotron have rarely been conducted. However, the growing demand shows the urgency of systematical management guideline and countermeasures for device failure to minimize any supply delay of radiopharmaceuticals occurred by such failure and complains from waiting patients for PET-CT diagnosis. Therefore, this study aims to analyze the failure report from Minitrace equipped in cyclotron which is owned by the department of nuclear medicine at Yeungnam University Medical Center and draws on the data to build effective management system for cyclotron.

• Journal of Ginseng Research
• /
• v.32 no.2
• /
• pp.135-149
• /
• 2008

This research entailed collecting foreign and foreign patents on technologies for process food related ginseng, creating category of patent technology searching and conducting quantitative analysis on each technology component and schematization. A technological trend of treating or preventing multiplicity of diseases has reviewed on 6,255 domestic and foreign patents from the year 1975 to 2004. Considering the increasing number of applicant and application of patent on technology of food manufacturing and processing in the world around year 2000, it seem that these technology is developing. The related technology seems in the initial stage and common research by related technology research centers, government organization and public corporation becomes active.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.108-111
• /
• 2003

Currently, molecular devices are reported utilizing active self-assembled monolayers containing the nitro group as the active component, which has active redox centers[1]. We confirm the electrical properties of 4,4-di(ethynylphenyl)-2'-nitro-1-benzenethiolate. To deposit the SAM layer onto gold electrode, we transfer the prefabricated Au(111) substrates into a 1mM self-assembly molecules in THF solution. Au(111) substrates were prepared by ion beam sputtering method of gold onto the silicon wafer. As a result, we measured current-voltage curve using ultra high vacuum scanning tunneling microscopy (UHV STM), I-V curve also clearly shows several current peaks between the negative bias region (-0.3958V) and the positive bias region (0.4658V), respectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.2
• /
• pp.109-116
• /
• 2005

In this paper, we investigate the visual and quantitative analysis at the same time with an electronic tongue(e-tongue) system using an array of ISE(ion-selective electrode). We apply the FCM(fuzzy c-means) algorithm combined with PCA(principal component analysis), which can be reduced multi-dimensional data to third-dimensional data, to classify data patterns detected by E-Tongue system. The proposed technique can be designed to solve the cluster centers and membership grade of patterns combined with the output results obtained by PCA method. According to the proposed technique, the membership grade of unknown pattern, which does not shown previously can be determined and analyzed visually. Conclusionally, the relationship between the standard patterns and unknown pattern can be easily analyzed. Throughout the experimental trials, the proposed technique has been confirmed using developed E-Tongue system.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.27 no.2
• /
• pp.146-159
• /
• 2023

This paper proposes a hybrid algorithm combining K-means clustering and watershed algorithms for flower segmentation and counting. We use the K-means clustering algorithm to obtain the main colors in a complex background according to the cluster centers and then take a color space transformation to extract pixel values for the hue, saturation, and value of flower color. Next, we apply the threshold segmentation technique to segment flowers precisely and obtain the binary image of flowers. Based on this, we take the Euclidean distance transformation to obtain the distance map and apply it to find the local maxima of the connected components. Afterward, the proposed algorithm adaptively determines a minimum distance between each peak and apply it to label connected components using the watershed segmentation with eight-connectivity. On a dataset of 30 images, the test results reveal that the proposed method is more efficient and precise for the counting of overlapped flowers ignoring the degree of overlap, number of overlap, and relatively irregular shape.