• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.225-231
• /
• 2003

Up-front irradiation technique as 3-dimensional conformation, or intensity modulation has kept large proportion of brain tumors from being complicated with acute radiation reactions in the normal tissue during or shortly after radiotherapy. For years, we've cannot help but counting on 2-D vertex beam technique to reduce acute reactions in the brain tumor patients because we're not equipped with 3-dimensional planning system. We analyzed its advantages and limitations in the clinical application. From 1998 to 2001, vertex or oblique vertex beams were applied to 35 patients with primary brain tumor and 25 among them were eligible for this analysis. Vertex(V) plans were optimized on the reconstructed coronal planes. As the control, we took the bilateral opposed techniques(BL) otherwise being applied. We compared the volumes included in 105% to 50% isodose lines of each plan. We also measured the radiation dose at various extracranial sites with TLD. With vertex techniques, we reduced the irradiated volumes of contralateral hemisphere and prevented middle ear effusion at contralateral side. But the low dose volume increased outside 100%; the ratio of V to BL in irradiated volume included in 100%, 80%, 50% was 0.55+/-0.10, 0.61+/-0.10, and 1.22+/-0.21, respectively. The hot area within 100% isodose line almost disappeared with vertex plan; the ratio of V to BL in irradiated volume included in 103%, 105%, 108% was 0.14+/-0.14, 0.05./-0.17, 0.00, respectively. The dose distribution within 100% isodose line became more homogeneous; the ratio of volume included in 103% and 105% to 100% was 0.62+/-0.14 and 0.26+/-0.16 in BL whereas was 0.16+/-0.16 and 0.02+/-0.04 in V. With the vertex techniques, extracranial dose increased up to $1{\sim}3%$ of maximum dose in the head and neck region except submandibular area where dose ranged 1 to 21%. From this data, vertex beam technique was quite effective in reduction of unnecessary irradiation to the contralateral hemispheres, integral dose, obtaining dose homogeneity in the clinical target. But it was associated with volume increment of low dose area in the brain and irradiation toward the head and neck region otherwise being not irradiated at all. Thus, this 2-D vertex technique can be a useful quasi-conformal method before getting 3-D apparatus.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.430-439
• /
• 2020

Purpose: As the frequency of impact typhoons increases and the form of damage becomes more complicated, the need for information to help disaster response workers recognize the typhoon situation in advance is growing. In this study, Definitions and implementation measures for information utilized at each stage of the task were proposed in carrying out typhoon response tasks that occur every year. Method: In 2019, the government classified information that was used for each step of work and conducted analysis on necessary information for the situation. Based on the analyzed information, typhoon status information was established through an opinion survey by central and local government officer. Result: The task of typhoon situations was the most important part of monitoring weather conditions and sharing damage situations, and the information utilized was analyzed to require information derived through the convergence of historical and situation information. Conclusion: As the correlation between work and information between the response departments increases as the typhoon situation progresses, information about typhoon situation should be applied to the actual typhoon situation in the future to enhance information and establish a related system.

• Archives of design research
• /
• v.11 no.2
• /
• pp.203-213
• /
• 1998

The forthcoming twenty-first century is at the mercy of information and culture. A quality of humanlife is under the control of a cultural level. A nation's creative culture and a cultural level represent all things about the nation; and a national image, as a whole result of culture, is enormously influential. This new era of culturalism gives us a significant responsibility for getting ready for the late industrial society by practically harmonizing rationality of modem culture with conception of traditional culture. Industrializing culture and culturalizing industry will be the most important strategy for existence in these days of borderless international competitiveness. Cultural products which is containing a nation's own culture can not only enhance the national image, but also become high value-added industry. While general products are developed for the purpose of convenient and practical use, cultural products are created with the intention of informing international society about a nation or a region. In order to confront with a global market system and a change of cultural environment, it is necessary to create a proper design with cultural inheritance for modem likes and senses, to produce the design on a commercial scale, and to strengthen its competitiveness on international markets. In order that a commodity is born, distributed throughout markets, and delivered to a final consumer, it is essential to understand complicated process such as development, distribution and marketing of products and to systematize each part. Although we should not neglect any part, a political and systemical plan or a distributional and marketing idea will be beside the point in this article. This article presents importance of traditional patterns as a Korean cultural image, and it shows the process of designing and developing products in order for traditional patterns to be utilized for products effectively. I expect that concrete activation and systematization for those works can be carried out successively.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.192-199
• /
• 2000

The design of multi-stage gear drives is a time-consuming process because it includes more complicated problems, which are not considered in the design of single-stage gear drives. The designer has no determine the number of reduction stages and the gear ratios of each reduction stage. In addition, the design problems include not only dimensional design but also configuration design of gear drive elements. There is no definite rule or principle for these types of design problems. Thus the design practices largely depend on the sense and the experiences of the designer, and consequently result in undesirable design solution. A new and generalized design algorithm has been proposed to support the designer at the preliminary phase of the design of multi-stage gear drives. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. The algorithm consists of four steps. In the first step, the user determines the number of reduction stages. In the second step, gear ratios of every stage are chosen using the random search method. The values of the basic design parameters of a gear are chose in the third step by using the generate and test method. Then the values of the dimensions, such as pitch diameter, outer diameter and face width, are calculated for the configuration design in the next step. The strength and durability of each gear is guaranteed by the bending strength and the pitting resistance rating practices by using AGMA rating formulas. In the final step, the configuration design is carried out using simulated annealing algorithm. The positions of gears and shafts are determined to minimize the geometrical volume (size) of a gearbox while avoiding interferences between them. These steps are carried out iteratively until a desirable solution is acquired. The proposed design algorithm is applied to the preliminary design of four-stage gear drives in order to validate the availability. The design solution has considerably good results in both aspects of the dimensional and the configuration design.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.197-208
• /
• 2007

Enormously sized buildings are appearing world-wide with the advancement of construction techniques. Large-scaled and complicated structures will have increased difficulties for dealing with safety, and will demand well-matched safety measures. This research introduced up-to-date techniques and systems which are applied in buildings in foreign nations. Furthermore, it proposed s direct guidance plan for buildings in case of fire. Since it is possible to install wireless sensor networks which detect fires or effects of fire, the plan makes use of this information. Accordingly, the authors completed a direct guidance plan that was based on omnidirectional guidance lights. It is possible to select a route with concern about both time and capacity with a concept of a non-dominated path. Finally, case studies showed that quickest path algorithms were effective for guiding efficient dispersion routes and in case of restriction of certain links in preferred paths due to temperature and smoke, it was possible to avoid relevant links and to restrict demand in the network application. Consequently, the algorithms were able to maximize safety and minimize evacuation time, which were the purposes of this study.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.146-150
• /
• 2005

A nano-stereolithouaphy (NSL) apparatus has been developed for fabrication of microstructures with the resolution of 150 nanometers. In the NSL process, a complicated 3D structure can be fabricated by building layer by layer, so it does not require any sacrificial layer or any supporting structure. A laminated layer was fabricated by means of solidifying liquid-state monomers using two-photon absorption (TPA) which was induced by a femtosecond laser. When the fabrication of a 3D laminated structure was finished, unsolidified liquid-stage resins were removed to develop the fabricated structure by dropping several droplets of solvent, then the polymerized structure was only left on the glass substrate. A microstructure is fabricated by vector scanning method to save the fabrication time. The shell thickness of a structure is very thin within 200 nm, when it is fabricated by a single contour scanning (SCS) path. So, a fabricated structure can be deformed easily in the developing process. In this work, a double contour scanning (DCS) method was proposed to reinforce the strength of a shell typed structure, and a microcup was fabricated to show the usefulness of the developed NSL system and the DCS method.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.4101-4101
• /
• 2001

Information of body composition (fat and protein) in living animal is important to determine the nutrients requirement. Deuterium oxide (D2O) dilution techniques, as one of isotope dilution techniques have been useful for the prediction of body composition. However, the determination of D2O concentration is time consuming and complicated. Therefore this study was conducted to develop a new method to predict D2O concentration in plasma using near infrared spectroscopy technique (NIRS). Four dairy cows in early lactation were used. They were fed total mixed ration containing conr silage, timothy hay, and concentrates to make 17.0%CP and 14.0 MJDE/kgDM. Dosing D2O was at week 1,3 and 5 after parturition. After dosing D2O, the blood was collected from hour 0 to 72. Blood samples were then centrifuge at 3,000 rpm for 10 minutes to obtain plasma. D2O concentration was analyzed by gas chromatograph (deuterium oxide analyzable system, HK102, Shokotsusyou) after extracted from plasma by liophilization. Plasma sample was scanned by NIRS using Pacific Scientific (Neotec) model 6500 (Perstorp Analytical, Silver Spring, MD) in the range of wavelength from 1100 to 2500 nm. Calibration equation was developed using multiple linear regression. Sample from one animal (cow #550; n: 74) was used for developing the calibration while the rest three animals were used for validating the equation. The range, R and SEC of the calibration set samples were 135-925 ppm, 0.93 and 48.1 ppm, respectively. Validation of the calibration equation for three individual cows was done and the average of NIR predicted value of D2O at each collection time from three weeks injection showed a high correlation. The range, r and 53 of plasma from cow #474 were 322-840 ppm,0.93 and 53.1; cow #478 were 146-951 ppm,0.95 and 39.8; cow #942 were 313-885 ppm,0.95 and 37.2, respectively. Judgement of accuracy based on ratio of standard deviation and standard error in validation set samples (RPD) for cow #474, #478 and #942 were 2.2,4.3 and 3.4, respectively. The error in application due to the variation between individual was considered smaller than the bias from collection period, however, this prediction can be overcome with correction of standard zero-minute concentration of blood. The results of this preliminary study on the use of NIRS for determination of D2O in plasma showed very promising as shown by a convenient and satisfy accuracy. Further study on various physiological stage of animal should be done.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.961-970
• /
• 2009

Over the last decade, interactive devices such as mobile phones have become complicated drastically mainly because of feature creep, the tendency for the number of features in a product to rise with each release of the product. One of the ways to reduce the complexity of a multi-functional device is to design it consistently. Although the definition of consistency is elusive and it is sometimes beneficial to be inconsistent, in general, consistently designed systems are easier to learn, easier to remember, and causing less errors. In practice, however, it is often not easy to design the user interaction or interface of a multi-functional device consistently. Since the interaction design of a multi-functional device should deal with a large number of design variables and relations among them, solving this problem might be very time-consuming and error-prone. Therefore, there is a strong need for a well-developed methodology that supports the complex design process. This study has developed an effective and efficient methodology, called CUID (Consistent Design of User Interaction), which focuses on logical consistency rather than physical or visual consistency. CUID deals with three main problems in interaction design: procedure design for each task, decisions of available operations(or functions) for each system state, and the mapping of available operations(functions) and interface controls. It includes a process for interaction design and a software tool for supporting the process. This paper also demonstrates how CUID supports the consistent design of user interaction by presenting a case study. It shows that the logical inconsistencies of a multi-functional device can be resolved by using the CUID methodology.

• International Journal of Contents
• /
• v.10 no.1
• /
• pp.54-61
• /
• 2014

In this paper, we propose a pioneering concept of DPD(Disaster Prevention Design) to realize a securable society in the future. Features of danger in the future society are expected to be diverse, abrupt occurring, large scale, and complicated ways. Due to increment of dangers with their features of uncertainty, interactivity, complexity, and accumulation, human-oriented design concept naturally participates in activities to prevent our society against disasters effectively. We presented DPD is an essential design activity in order to cope with dangers expected in the future societies as well as realize securable environments. DPD is also an integrated design aids including preemptive protections, rapid preparing, recovery, and interactive cooperation. We also expect these activities of DPD is effective for generation of new values in the market, satisfaction of social needs, expansion of design industry, and a novel chance for development in the future society. Throughout this paper, we submit various aspects of DPD concepts including definition, classification, scope, necessity, strategy, influencing elements, process, and its principle. We expect these concepts will be the seed and/or basement of DPD research for the future works. For the direction of study for DPD in the future, we emphasize alarm system for preemptive protection rather than recovery strategy for the damage occurred. We also need to research about progressive prevention techniques and convergence with other areas of design. In order to transfer the concept of product design from facility-oriented mechanism to human-oriented one, we should develop new kinds of city basis facilities, public-sense design concepts referred to social weak-party, e-Learning content design preparing disasters, and virtual simulation design etc. On the other hand, we have to establish laws and regulations to force central and/or provincial governments to have these DPD strategies applying their regional properties. Modern design activities are expanding to UI(user interface) content design area overcoming the conventional design concept of product and/or service. In addition, designers are recognized as art directors or life stylists who will change the human life and create the social value. DPD can be divided into prevention design, preparedness design, response design, and recovery design. Five strategies for successful DPD are Precaution-oriented, Human-oriented, Sense-oriented, Legislation, and Environment Friendly Strategies.

• Cartoon and Animation Studies
• /
• s.27
• /
• pp.153-176
• /
• 2012

In the midst of the fusion era in digital contents, securing a variety of traditional cultural sources is important. Out of its long history, Korea has extensive spectrum of cultural contents in combination with conventional religions. Buddhist art has been a pillar of the traditional culture for a long time in Korea, by which we could secure new sources for cultural contents and classify them. This is aimed that we could bring the future brands into reality based on the traditional culture through Buddhist cultural contents. This study hired the original cultural forms in the viewpoints of traditional culture. Study on the implication through the symbols of Avalokitesvara (觀音菩薩) and Buddhist child (童子) in Buddhist art might allow to secure a foothold to create own characters. Thus, focusing on Avalokitesvara (觀音菩薩) and Buddhist child (童子) in the Buddhist sacred images as registered in Cultural Heritage Administration for national treasures, those traditional characters were reviewed through their own system of symbol. During the course, Buddhist characters were available to be classified into DB by their roles and materials지물. This study could help to exploit the complicated Buddhist culture of its symbolic meanings and to shape them into original forms of the culture. Also, through the meanings of the Buddhist sacred images, it could provide the digital contents pool with Korean traditional characters.