• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.10 no.1
• /
• pp.96-99
• /
• 2014

The aim of the study was to evaluate the water treatment of pressurized water reactor secondary side by the mixed amine of ammonia and ethanolamine, from the standpoint of corrosion control, as compared with all volatile treatment of ammonia. The pressurized water reactor systems have switched a secondary side pH control agent to minimize the corrosion in the moisture separator/reheater and feedwater heater systems and the transport of corrosion products into steam generator. As results of field test, pH was increased in the steam generator and the wet steam area of moisture separator/reheater and the concentration of Fe were decreased by more than 50% as compared with water treatment of ammonia.

• Journal of the East Asian Society of Dietary Life
• /
• v.5 no.2
• /
• pp.89-101
• /
• 1995

Kimchi is a fermented Korean vegetable product prepared using mafor raw materials (oriental cabbage and radish) and other ingredients through a series of processes of grading, brining, blending, and fermentation. Kimchi fermentation is initiated by various microorganisms originally present in the raw materials, but the fermentation is gradually dominated by lactic acid bacteria. Thus, the complex biochemical activities obviously occur during, before and after kimchi fermentation and their biochemical characteristics greatly differ, depending on the raw materials and processes used. This review covers in detail the numerous biochemical characteristics of sugars, organic acids, amino acids, vitamins(B complex, carotene and ascorbic acid), pectic substances, flavor components and others during preparation and preservation of kimchi.

• ETRI Journal
• /
• v.28 no.6
• /
• pp.745-760
• /
• 2006

In this paper, we particularly deal with no $F_p$-rational two-torsion elliptic curves, where $F_p$ is the prime field of the characteristic p. First we introduce a shift product-based polynomial transform. Then, we show that the parities of (#E - 1)/2 and (#E' - 1)/2 are reciprocal to each other, where #E and #E' are the orders of the two candidate curves obtained at the last step of complex multiplication (CM)-based algorithm. Based on this property, we propose a method to check the parity by using the shift product-based polynomial transform. For a 160 bits prime number as the characteristic, the proposed method carries out the parity check 25 or more times faster than the conventional checking method when 4 divides the characteristic minus 1. Finally, this paper shows that the proposed method can make CM-based algorithm that looks up a table of precomputed class polynomials more than 10 percent faster.

• Natural Product Sciences
• /
• v.5 no.3
• /
• pp.124-126
• /
• 1999

A new natural product $stigmast-5-en-3-O-{\beta}-D-glucopyranoside$ tetraacetate (1) along with known compounds $stigmast-5-en-3-O-{\beta}-D-glucopyranoside$ (2), stigmast-5-en-3-yl-cetate (3) and ${\beta}-sitosterol$ (4) have been isolated from the stems of Cuscuta reflexa. Their structures were elucidated on the basis of chemical and spectroscopic evidence.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.9
• /
• pp.1515-1518
• /
• 2007

A preparative method of Me2SCuX (X = Cl, Br) via one-pot reaction was developed from common chemicals such as benzyl halide, DMSO, and Cu(0). In the reaction mixture small molecules such as methyl halide and dimethyl sulfide etc. were efficiently generated in situ, resulting in the formation of Me2SCuX. Oxidation of Cu(0) in reacting with both benzyl halide (starting material) and methyl halide (in situ generated product) to Cu(I) followed by complexing with dimethyl sulfide (in situ generated product) could explain the formation of Me2SCuX. In particular we found out that heterogeneous reaction of Me2SCuX and arenediazonium tetrafluoroborate in acetonitrile was so effective to afford corresponding bromoaromatics under mild conditions.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.5
• /
• pp.545-552
• /
• 2021

HAE-06 extract is a mixture of four medicinal plants, namely Lonicerae Folium et Caulis (Lonicera japonica), Scutellariae Radix (Scutellaria baicalensis), Adenophorae Radix (Adenophora triphylla var. japonica), and Polygonati Oddorati Rhizoma (Polygonatum odoratum var. pluriflorum). The HAE-06 extract demonstrated a concentration-dependent relaxing effect and enhanced cAMP production in bronchial smooth muscle that had been stimulated to contract with acetylcholine. Using a blocker, it was confirmed that the effect was through the β2-adrenergic receptor/cAMP/PKA pathway. In addition, it is thought that the HAE-06 extract has a bronchial smooth muscle relaxation effect by reducing the inflow of Ca²⁺ through the K⁺ and Ca²⁺ channels present in the sarcoplasmic membrane. If research continues in the future, it is believed that it will be possible to use it as a material for pharmaceuticals and functional foods.

• Journal of the Korean Magnetic Resonance Society
• /
• v.27 no.2
• /
• pp.10-15
• /
• 2023

The Strain-Promoted Azide-Alkyne Cycloaddition (SPAAC) is a powerful method for synthesizing triazoles, even under physiological conditions, without a copper catalyst. This technique provides an efficient means for everyone to synthesize complex triazole derivatives rapidly. In order to investigate the configuration of triazole derivatives using bicyclo[6.1.0.]-nonyne (BCN) and chiral azide, it is necessary to employ the 2D NMR. Both 1D and 2D NMR (COSY, HSQC, ¹⁵N HMBC) are used to analyze the complex triazole product containing cyclooctyne, a diastereomeric product. The stereometric difference of the proton bonded to the same carbon is determined through the HSQC assignment. The intriguing splitting pattern of carbon resonances also reveals their diastereomeric configuration and will aid in further research based on physiological knowledge.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.210-221
• /
• 2000

Plastic mold designers and frequently faced with optimizing multi-quality issues in injection molded parts. These issues are usually in conflict with each other and thus tradeoff needs to be made to reach a final compromised solution. in this study an automated injection molding design methodology has been developed to optimize multi-quality characteristics of injection molded parts. The features of the proposed methodology are as follows : first utility theory is applied to transform the original multi-objective problem into single-objective problem. Second is an implementation of a direct search-based injection molding optimization procedure with automated consideration of robustness against process variation. The modified complex method is used as a general optimization tool in this study. The developed methodology was applied to an actual mold design and the results showed that the methodology was useful through the CAE simulation using a commercial injection molding software package. Applied to production this study will be of immense value to companies in reducing the product development time and enhancing the product quality.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.116-123
• /
• 2001

An automated injection molding design methodology has been developed to optimize multiple quality attributes, which are usually in conflict with each other, in injection molded parts. For the optimization, commercial CAE simulation tools and optimization techniques are integrated into the methodology. To decal with the multiple objective problem the relative closeness computed in TOPSIS(Technique for Order Preference by Similarity to Ideal Solution) is used as a performance measurement index for optimization multiple part defects. To attain robustness against process variation, Taguchi's quadratic loss function is introduced in the TOPSIS. Also, the modified complex method is used as an optimization tool to optimize objective function. The verification of the developed design methodology was carried out on simulation software with an actual model. Applied to production this methodology will be useful to companies in reducing their product development time and enhancing their product quality.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.4
• /
• pp.415-424
• /
• 2002

Semiconductor manufacturing has been emerged as a highly competitive but profitable business. Accordingly it becomes very important for semiconductor manufacturing companies to meet customer demands at the right time, in order to keep the leading edge in the world market. However, due-date oriented production is very difficult task because of the complex job flows with highly resource conflicts in fabrication shop called FAB. Due to its cyclic manufacturing feature of products, to be completed, a semiconductor product is processed repeatedly as many times as the number of the product manufacturing cycles in FAB, and FAB processes of individual manufacturing cycles are composed with similar but not identical unit processes. In this paper, we propose a production scheduling and control scheme that is designed specifically for semiconductor scheduling environment (FAB). The proposed scheme consists of three modules: simulation module, cycle due-date estimation module, and dispatching module. The fundamental idea of the scheduler is to introduce the due-date for each cycle of job, with which the complex job flows in FAB can be controlled through a simple scheduling rule such as the minimum slack rule, such that the customer due-dates are maximally satisfied. Through detailed simulation, the performance of a cycle due-date based scheduler has been verified.