• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.226-231
• /
• 2003

There have been many attempts to make kart chassis domestically to lower the price of complete kart. However nobody made a successful chassis due to the lack of understanding the characteristics of kart chassis frame. In this work, a baseline chassis frame under the bending and torsional load is studied. Design target is that the baseline chassis frame is quite adequate not only for the beginners but also for the beginning racers. Results from the analysis are used as a guide to design or modify the baseline chassis with the goal of proper torsional stiffness. Minimum increase in weight is being forced. As a result, the baseline chassis frame was designed, made, and tested. Based on the design results, complete karts are being manufactured by the small 1 size domestic company and these karts are being sold and run in the market.

• 응용통계연구
• /
• 제11권2호
• /
• pp.233-246
• /
• 1998

1995년 가축통계 총조사자료에 기초하여 1998년부터의 향후 5년간의 표본설계를 하였다. 먼저 본 설계에서는 시도별 변이계수가 목표인 점을 고려하여 농가별 사육마리수를 전체사육마리수로 나눈 사육비율을 구한 다음 이를 전수기준과 총화에 이용하였다. 전수농가기준은 전수농가를 제외 한 후 조사구의 축종별 사육비율의 분산이 일정하게 하는 기준을 정하였고, 층화는 네축종중 최 대사육비율이 비슷한 조사구를 complete linkage 방법에 의해 층화하였다. 충의 개수는 층화에 따른 표본개수를 최소화하는 충의 수를 선정하였다. 또한 표본설계과정상의 해결하기 힘들었던 문제점을 열거하였다.

• 한국응급구조학회지
• /
• 제9권2호
• /
• pp.79-88
• /
• 2005

The purpose of this study was to develope the Complete Airway Obstruction Maneuver Training Program and identify its effects on learning motivation, knowledge and skill of choking management in the primary school students. The subjects for the experimental group of 38 students and the control group of 39 students, all of whom are primary school students in Gwangju, the Republic of Korea. A non-equivalent control group pretest-posttest design was used and data were collected from November to December, 2003. During about 2 weeks, 2 times for a week with 80 minutes at a time, the complete airway obstruction maneuver training program was conducted in the experimental group. Experimental data were analyzed through SPSS/win 11.0 PC+, and the tests examining general characteristics between the experimental group and the control group were conducted through $x^2$-test. Fisher's exact probability test and t-test, and identifying the effect of the complete airway obstruction Maneuver training program was analysed through t-test and ANCOVA. The results of the study were as follows: 1. After intervention on the complete airway obstruction maneuver training program, Learning motivation in the experimental group was significantly higher than that of the control group. 2. After intervention on the complete airway obstruction maneuver training program, knowledge of choking management the experimental group was significantly higher than that of the control group(F=223.637, p=.000). 3. After intervention on the complete airway obstruction maneuver training program, skill of choking management the experimental group was significantly higher than that of the control group(t=46.800, p=.014). These findings suggest that the complete airway obstruction maneuver training program can facilitate learning motivation, knowledge and skill of choking management in the primary school students. Therefore it is considered that the complete airway obstruction maneuver training program can be utilized as a effective way to implement the 7th national curriculum for creative extra-activities.

• The Journal of Advanced Prosthodontics
• /
• 제12권6호
• /
• pp.361-368
• /
• 2020

PURPOSE. The present study aimed to evaluate the accuracy of a desktop scanner and intraoral scanners based on the volumetric dimensions of a complete arch. MATERIALS AND METHODS. Seven reference models were fabricated based on the volumetric dimensions of complete arch (70%, 80%, 90%, 100%, 110%, 120%, and 130%). The reference models were digitized using an industrial scanner (Solutionix C500; MEDIT) for the fabrication of a computer-aided design (CAD) reference model (CRM). The reference models were digitized using three intraoral scanners (CS3600, Trios3, and i500) and one desktop scanner (E1) to fabricate a CAD test model (CTM). CRM and CTM were then superimposed using inspection software, and 3D analysis was conducted. For statistical analysis, one-way analysis of variance was used to verify the difference in accuracy based on the volumetric dimensions of the complete arch and the accuracy based on the scanners, and the differences among the groups were analyzed using the Tukey HSD test as a post-hoc test (α=.05). RESULTS. The three different scanners showed a significant difference in accuracy based on the volumetric dimensions of the complete arch (P<.05), but the desktop scanner did not show a significant difference in accuracy based on the volumetric dimensions of the complete arch (P=.808). CONCLUSION. The accuracy of the intraoral scanners was dependent on the volumetric dimensions of the complete arch, but the volumetric dimensions of the complete arch had no effect on the accuracy of the desktop scanner. Additionally, depending on the type of intraoral scanners, the accuracy differed according to the volumetric dimensions of the complete arch.

• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.6-19
• /
• 2024

Computer aided design/Computer aided manufacturing (CAD-CAM) 기술의 발전에 따라 이를 활용한 총의치 제작 방법이 대두되고 있으며, 그 중 하나로 의치상과 인공치의 색조를 모두 포함하는 모놀리식 블록을 절삭하는 디지털 의치 시스템이 소개되었다. 본 증례는 74세 남성, 73세 여성 두 환자에서 전통적인 기존 의치 제작법, 디지털 방식의 모놀리식 블록을 절삭한 의치 제작법으로 각각 총 두 쌍의 상·하악 의치를 제작하여 비교한 증례이다. 디지털 방식의 총의치 제작 과정으로는 CAD-CAM 프로그램으로 개인 트레이를 디자인 및 3D프린팅 하여 최종인상 및 악간 관계 채득하였다. 이후 동일한CAD-CAM프로그램으로 총의치 디자인 및 시적의치를 3D 프린팅 하여 시적 하였다. 최종적으로는 모놀리식 블록(Ivotion, Ivoclar Vivadent, Schaan, Liechtenstein)을 밀링 기계(PrograMill PM7, Ivoclar Vivadent, Schaan, Liechtenstein)로 절삭하여 총의치 제작 및 장착하였다. 해당 증례에서는 CAD-CAM 시스템을 이용한 총의치 제작과 동시에 전통적 방법으로도 총의치를 제작하여2쌍의 의치의 안정 및 적합성, 발음, 저작, 심미성과 환자의 만족도를 비교, 분석하여 이를 보고하고자 한다.

• Journal of Forest and Environmental Science
• /
• 제28권4호
• /
• pp.278-281
• /
• 2012

Comparative sequence analyses were conducted on complete mtDNA sequences from four small mammal species in Korea and revealed the presence of 30 well conserved sequences in various regions of the complete mtDNA sequences. The conserved sequences were found in 9 regions in protein coding genes, 10 regions in tRNA genes, 10 in rRNA genes, one region in replication origin and 2 regions in D loop. They could be used to design primers for amplifying complete mtDNA sequences of small mammals.

• 대한전자공학회논문지
• /
• 제19권6호
• /
• pp.9-16
• /
• 1982

이 설계 과정은 보통의 더지탈 하아드웨어 담계에 복합 기계 개념을 응용한 일설계 기법을 소개한 것이다. 이 과정은 계산기용 소프트웨어 설계의 경우와 마찬가지로 새 시스템을 흐름도에 의해 표현시키는 것으로 부터 시작되며, 이어서 흐름도를 분해하여 발산형 요소를 얻고, 이 발산형 요소를 근거로 소기계를 작성하게 되는데, 이렇게 소기계의 작성이 끝나게 되면. 이번에는 통합 과정을 통해서 복합체와 지시기를 만들고, 논리자로를 완척함으로써 전휴의 설계 과정을 완료하게 된다. This is an introduction to an art of digital hardware design using polymachine image as a target structure of the product. As in the case of software design of a computer, the design process begins with a sketch of planned system in flow chart description and the flow charts is partitioned into divergent elements. Each of the element machine is derived from those divergent elements. We can build a complete digital system with the preparation of an index, and a polymer of these element machines.

• 컴퓨터교육학회논문지
• /
• 제7권1호
• /
• pp.107-118
• /
• 2004

본 연구에서 제안하는 시스템은 기존의 웹기반에서의 문제운행 시스템원리인 학습내용전개$\rightarrow$문제제공$\rightarrow$평가결과를 제시하는 수준에서 탈피한 IPI(Individually Prescribed Instruction: 개별처방식 수업)를 적용한 개별완전학습을 목표로 설계 구현한 것이다. 개별완전학습을 하기 위하여 먼저 선수학습의 진단평가가 이루어지며 이에 따라 학생들 각자에 맞는 학습을 하게 된다. 또한 학생들마다 수업 목표에 도달하는 시간이 다르기 때문에 하나의 단원을 완전학습하기 전에는 다음 단원으로 학습이 진행될 수 없다. 따라서 학습의 성취도를 측정하기위해 각 단원의 학습 뒤에 평가가 이루어지며 평가결과 80%이상의 성취수준을 보이면 다음 단원의 학습으로 계속 진행이 이루어지고, 80%미만의 성취수준을 보이면 다음단원으로의 진행이 제한되고 개인별 보충학습이 이루어진다. 여기서 보충학습은 학습자가 완전히 학습하지 못한 학습에 대한 수준별 처방 학습이다. 따라서 본 연구는 개별처방식 수업의 완전학습에 그 목표를 두고 선수학습 결손을 방지하고 개인적 능력에 따라 피드백 학습을 하여 완전학습 목표에 도달할 수 있도록 시스템을 설계 및 구현하였다.

• 대한치과기공학회지
• /
• 제46권3호
• /
• pp.84-92
• /
• 2024

Purpose: To evaluate the effect of post-curing on the three-dimensional (3D) accuracy of artificial teeth, denture bases, and denture base monoblock manufactured using digital light processing (DLP) technology. Methods: Using an edentulous model, a 3D design was made for complete dentures. Three groups were printed by DLP: artificial teeth, denture bases, and denture base monoblock. The models were scanned, subjected to post-curing, and scanned again. Three-dimensional analysis was performed based on the post-treatment differences among the three groups. Statistical analysis was performed using SPSS Statistics ver. 22.0 (IBM), and the Mann-Whitney U-test and Kruskal-Wallis test were employed as nonparametric tests. Results: The complete denture monoblock (CM) and complete denture artificial teeth (CA) groups showed the lowest and highest errors at 15.13 and 23.37 ㎛, respectively. The groups did not show significant differences (p>0.05). In the significance test among the three groups, no significance was found in the CA group; however, significant differences were found between the complete denture base (CB) and CM groups. In addition, the three groups showed significant differences (p<0.05). Conclusion: Although deformation may occur during the post-curing process, it is within the clinically acceptable range. Future comparative studies using different 3D printers and searching for ways to minimize errors through optimization of the post-curing process are warranted.

• International Journal of Control, Automation, and Systems
• /
• 제3권2호
• /
• pp.159-165
• /
• 2005

This paper designs observers for matrix second-order linear systems on the basis of generalized eigenstructure assignment via unified parametric approach. It is shown that the problem is closely related with a type of so-called generalized matrix second-order Sylvester matrix equations. Through establishing two general parametric solutions to this type of matrix equations, two unified complete parametric methods for the proposed observer design problem are presented. Both methods give simple complete parametric expressions for the observer gain matrices. The first one mainly depends on a series of singular value decompositions, and is thus numerically simple and reliable; the second one utilizes the right factorization of the system, and allows eigenvalues of the error system to be set undetermined and sought via certain optimization procedures. A spring-mass system is utilized to show the effect of the proposed approaches.