• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.551-555
• /
• 2010

Electrowetting is a versatile tool to handle tiny droplets and forms a backbone of digital microfluidics. Numerical analysis is necessary to fully understand the dynamics of electrowetting, especially in designing electrowetting-based devices, such as liquid lenses and reflective displays. We developed a numerical method to analyze the general contact-line problems, incorporating dynamic contact angle models. The method is based on the conservative level set method to capture the interface of two fluids without loss of mass. We applied the method to the analysis of spreading process of a sessile droplet for step input voltages and oscillation of the droplet for alternating input voltages in electrowetting. The result was compared with experimental data. It is shown that contact line friction significantly affects the contact line motion and the oscillation amplitude. The pinning process of contact line was well represented by including the hysteresis effect in the contact angle models. In level set method, in the mean time, material properties are made to change smoothly across an interface of two materials with different properties by introducing an interpolation or smoothing scheme. So far, the weighted arithmetic mean (WAM) method has been exclusively adopted in level set method, without complete assessment for its validity. We viscosity, thermal conductivity, electrical conductivity, and permittivity, can be an alternative. I.e., the WHM gives more accurate results than the WAM method in certain circumstances. The interpolation scheme should be selected considering various characteristics including type of property, ratio of property of two fluids, geometry of interface, and so on.

• 열처리공학회지
• /
• 제21권1호
• /
• pp.10-19
• /
• 2008

To investigate the effect of ultrasonic nano-crystalline surface modification (UNSM) treatment on rolling contact fatigue and residual stress properties of bearing steels, this paper carried out a rolling contact fatigue test, measured residual stress and retained austenite, performed a wear test, observed microstructure, measured micro hardness, and analyzed surface topology. After the UNSM treatment, it was found that the surface became minute by over $100{\mu}m$. The micro surface hardness was changed from Hv730~740 of base material to Hv850~880 with about 20% improvement, and hardening depth was about 1.3 mm. The compressive residual stress was measured as high as -700~-900 MPa, and the quantity of retained austenite was reduced to 27% from 34%. The polymet RCF-6 ball type rolling contact fatigue test showed over 4 times longer fatigue lifetime after the UNSM treatment under 551 kgf load and 8,000 rpm. In addition, this paper observed the samples, which went through the rolling contact fatigue test, with OM and SEM, and it was found that the samples had a spalling phenomenon (the race way is decentralized) after the UNSM treatment. However, before the treatment, the samples had excessive spalling and complete exploration. Comparison of the test samples before and after the UNSM treatment showed a big difference in the fatigue lifetime, which seems to result from the complicated effects of micro particles, compressive residual stress, retained austenite, and surface topology.

• 대한치과보철학회지
• /
• 제61권2호
• /
• pp.160-178
• /
• 2023

보철 치료 시 교합관계의 진단과 분석은 중요한 요소 중 하나이다. 치료 시행 전 면밀한 교합분석 및 평가가 선행되어 안정적인 악간 관계를 회복시켜 주어야 하며, 치료 과정 및 정기 검진 시에도 이에 대한 평가는 필수적이다. 최근, 치과용 기기와 디지털 처리 방식의 발달로 환자의 교합관계를 기록할 수 있는 새로운 정량적 분석 방법들이 소개되고 있다. 그 중 T-Scan Novus (Tekscan Inc., S. Boston, MA, USA)는 압력측정센서를 이용하여 상하악 치아의 초기접촉점과 교합접촉점의 상대적인 강도를 나타내며 치아의 교합접촉 시간, 교합력의 전후방, 좌우균형을 비교할 수 있다. Dental prescale II (GC Co., Tokyo, Japan)는 압력감지필름을 이용하여 교합접촉점을 스캔하여 접촉점의 밀도를 분석하는 방법으로 최대한 자연스러운 교합상태 치열의 교합력 분포와 강도를 측정할 수 있다. 환자의 치아 상실 부위와 범위에 따라 4-unit 고정성 국소의치, 가철성 국소의치, 총의치, 완전구강회복술을 시행하였다. 적절한 교합 분석을 위해, 초진, 각 치료 단계, 치료 직후 및 정기검진 시의 환자의 교합을 T-Scan Novus와 Dental prescale II를 이용하여 정량적으로 비교, 평가하였다. 보철수복 치료과정에서 교합 분석에 대한 이해도를 제고할 수 있었고, 기능 및 심미적으로 환자와 술자 모두 만족할 만한 결과를 얻었기에 이를 보고하고자 한다.

• 대한치과의사협회지
• /
• 제50권1호
• /
• pp.13-21
• /
• 2012

In an edentulous situation, the dentist must make several determinations when constructing artificial teeth. These include vertical and horizontal relationships of mandible with respect to the maxilla, occlusal form and position, vertical dimension, occlusal relationships during both centric closure and eccentric excursive movements. Artificial teeth are attached to a movable base resting on movable and displaceable living tissue subject to damage. They act as a unit; therefore, they must be arranged to function as a unit. Bilateral balanced occlusion is that stability of the denture is attained when bilateral contacts ex ist throughout all dynamic and static states of the denture during function. Lateral excursion in a balanced scheme implies simultaneous working side and nonworking side contact, while occlusal contacts are maintained on both anterior and posterior teeth as the mandible moves anteriorly into protrusion.

• Clinics in Shoulder and Elbow
• /
• 제9권2호
• /
• pp.216-221
• /
• 2006

Avulsion of the triceps brachii is an uncommon injury. The usual mechanism of injury is fall onto an outstretched hand but can occur after direct contact injuries. Diagnosis is critical and dependent on history, physical examination, and radiological findings. Rupture of triceps brachii occurs most frequently at the tendo-osseous insertion and may be complete or partial, and could be associated with radial head fracture. Treatments include surgical repair of the complete rupture and immobilization of partial triceps rupture. We report 3 cases of triceps avulsion fractures treated by open surgical repair with literature reviews.

• 대한심미치과학회지
• /
• 제9권1호
• /
• pp.20-36
• /
• 2000

The movements of oral surrounding muscles, lips, and tongue play a very important role while masticating, swallowing, and speaking. In case of the edentulous patient wearing dentures as well, every movement of the tongue can be seen almost the same as that of the dentulous jaw. The crushed food during mastication is swallowed and sent to pharynx. At this course, the contact of the posterior portion of tongue with dentures affects the stabilization of denture. The retention and stability of the complete dentures are related with buccinator muscles of buccal parts, lips in front, and tongue of the lingual sides. Strack(1946) insisted that the arrangement of artificial teeth in the same place as that of the natural dentition is the best way to maintain the stability of denture. In this report, I would like to introduce the several advantages of a new impression method taken simultaneously, and its procedures and clinical cases.

• Coupled systems mechanics
• /
• 제1권2호
• /
• pp.165-182
• /
• 2012

Macroscopic hot spots formed due to the large thermal gradients at the surface of the disc brake rotor, make the rotor to fail or wear out early. Thermo-elastic deformation results in contact concentration, leading to the non uniform distribution of temperature making the disc susceptible to hot spot formation. The formation of one hot spot event will predispose the system to future hot spotting at the same location. This leads to the complete thermo-elastic instability in the disc brakes; multitude parameters are responsible for the thermo elastic instability. The predominant factor is the sliding velocity and above a certain sliding velocity the instability of the brake system occurs and hot spots is formed in the surface of the disc brake. Commercial finite element package ABAQUS(R) is used to find the temperature distribution and the result is validated using Rowson's analytical model. A coupled analysis methodology is evolved for the automotive disc brake from the transient thermo-elastic contact analysis. Temperature variation is studied under different sliding speeds within the operation range.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2717-2720
• /
• 2003

A mathematical framework for deriving acceleration bounds from given joint torque limits of two cooperating robots are described in this paper. Especially when the torque limits are given in 2-norm, the resultant geometrical configuration is ellipsoid(the ellipsoid is often called manipulability ellipsoid in many works). At first, the mathematical derivation starts from the dynamics of both object and robots as well as the kinematics of the robots, and is finally arranged in a form of equation relating joint torques to object acceleration through a complete constraint contact(or “very-soft contact”). To show the usefulness of the proposed method, two examples are included, and especially the case where friction effects the ellipsoid shape is also considered In the example.

• 소성∙가공
• /
• 제11권1호
• /
• pp.75-83
• /
• 2002

Recently, the hydroforming process is widely applied to the automotive industry and rapidly spreaded to other industries. In this paper, An implicit finite element formulation for simulating axisymmetric tube hydroforming processes is performed. In order to describe normal anisotropy of the tube, Hill's non-quadratic yield function is employed. The frictional contact between die and tube and the frictionless contact between tube and fluid are considered using the mesh-normal vectors computed from the finite element mesh of the tube. The complete set of the governing relations comprising equilibrium and interfacial equations is linearized for Newton-Raphson procedure. In order to verify the validity of the developed finite element formulation, the axisymmetric tube bulge test is simulated and the simulation results are compared with experimental measurements. In a simulation of stepped circular tube hydroforming processes, an optimal hydraulic pressure curve is pursued by considering simultaneously internal pressures and axial forces.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.397-401
• /
• 1995

ESPI(Electronic Speckle Pattern Interfermetry) is an optical technique to measure surface deforamtion of engineering components and materials in industrial ares. This optical method is capable of providing full-field results with high spatial resolution, high speed and is the non-contact technique. One of important application aspects using electronic speckle pattern interferometry is to generate contours of a diffuse object in order to provide data for 3-D shape analysis and topography measurement. The contouring method by modified dual-beam speckle pattern interferometry is proposed. We introduce a shift of the illumination beams through optical fiber in order to obtain the contour fringe patterns. The speckle pattern correlation technique is suitable for providing measurement range from millimeters to several centimeters. The complete geometric analysis of the contoretical and experimental results are obtained.