• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.351-361
• /
• 2016

Power quality is a critical issue in distribution systems, where a dynamic voltage restorer (DVR) is commonly used to mitigate the voltage disturbances for loads. This paper deals with a nonlinear control for the three-phase four-wire (3P-4W) DVR under a grid voltage unbalance and nonlinear loads in the distribution system, where a novel control scheme based on the feedback linearization technique is proposed. Through feedback linearization, a nonlinear model of a DVR with a PWM voltage-source inverter (VSI) and LC filters is linearized. Then, the controller design of the linearized model is performed by applying the linear control theory, where the load voltages are kept constant by controlling the d-q-0 axis components of the DVR output voltages. To keep the load voltage unchanged, an in-phase compensation strategy is employed, where the load voltages are recovered to be the same as the previous voltage without a change in the magnitude. With this strategy, the performance of the DVR becomes faster and more stable even under unbalanced source voltages and nonlinear loads. The validity of the proposed control strategy has been verified by simulation and experimental results.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.704-711
• /
• 2014

This paper proposes a combined fuzzy adaptive sliding-mode voltage controller (FASVC) for a three-phase UPS inverter. The proposed FASVC encapsulates two control terms: a fuzzy adaptive compensation control term, which solves the problem of parameter uncertainties, and a sliding-mode feedback control term, which stabilizes the error dynamics of the system. To extract precise load current information, the proposed method uses a conventional load current observer instead of current sensors. In addition, the stability of the proposed control scheme is fully guaranteed by using the Lyapunov stability theory. It is shown that the proposed FASVC can attain excellent voltage regulation features such as a fast dynamic response, low total harmonic distortion (THD), and a small steady-state error under sudden load disturbances, nonlinear loads, and unbalanced loads in the existence of the parameter uncertainties. Finally, experimental results are obtained from a prototype 1 kVA three-phase UPS inverter system via a TMS320F28335 DSP. A comparison of these results with those obtained from a conventional sliding-mode controller (SMC) confirms the superior transient and steady-state performances of the proposed control technique.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.6
• /
• pp.469-475
• /
• 2017

Using impedance matching techniques as a way to increase system power transferability in capacitive wireless power transmission has been widely investigated in conventional studies. However, these techniques tend to increase the circuit volume and thus counterbalance the advantage of the simplicity in the energy link structure. In this paper, a compact circuit topology with one leakage-enhanced transformer is proposed in order to minimize the circuit volume for the capacitive power transfer system. This topology achieves a reactive compensation, and the system quality factor value can be reduced by the turn ratio. As a result, this topology not only reduces the overall system volume but also minimizes the voltage stress of the link capacitor. An optimal design guideline for the leakage-enhanced transformer is also presented. The advantages of the proposed scheme over the conventional method in terms of power efficiency and circuit volume are revealed through an analytic comparison. The feasibility of applying the new topology is also verified by conducting 50 W hardware tests.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.528-533
• /
• 2010

This paper describes a calculation method of source level of a ship transient noise, which is one of the important elements for the ship detection. Aim of transient noise measurements is to evaluate of acoustic energy due to singular occurrence, which is therefore defined as non-periodic and short termed events like an attack periscope, a rudder and a torpedo door. In generally, in the case of randomly spaced impulse, the spectrum becomes a broadband random noise with no distinctive pattern. Therefore, frequency analysis is not particularly revealing for type of signal. In the paper, it is performed in time domain to analyze a transient noise. However, a source level of transient noise is required an investigation for multiple frequency band. So, in order to calculate a source level of transient noise, a design of exponential weighting function, convolution, band pass filtering, peak detection, root mean square, and parameter compensation are applied. The effectiveness of this calculation scheme is studied through computer simulations and a sea test. Furthermore, an application of the method is applied in a real case.

• Journal of Korea Multimedia Society
• /
• v.10 no.2
• /
• pp.179-186
• /
• 2007

This paper proposes a novel method for face detection method using Zernike moments. To detect the faces in an image, local regions in multiscale sliding windows are classified into face and non-face by a neural network, and input features of the neural network consist of Zernike moments. Feature dimension is reduced as the reconstruction capability of orthogonal moment. In addition, because the magnitude of Zernike moment is invariant to rotation, a tilted human face can be detected. Even so the detection rate of the proposed method about head on face is less than experiments using intensity features, the result of our method about rotated faces is more robust. If the additional compensation and features are utilized, the proposed scheme may be best suited for the later stage of classification.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1708-1719
• /
• 2018

A complete current loop decoupling control strategy based on a sliding mode observer (SMO) is proposed to eliminate the influence of current dynamic coupling and back electromotive force (EMF) in the vector control of permanent magnet synchronous motors. With this strategy, current dynamic decoupling and back EMF compensation can be simultaneously achieved. Unlike conventional methods, the proposed strategy can avoid the disturbances caused by the parametric variations of motor systems and maintain the advantages of proportional integral (PI) controllers, which are robust and easy to operate. An improved SMO, which uses a special PI regulator other than a linear saturation function as the equivalent control law in the boundary layer of a sliding surface, is proposed to eliminate the estimated errors caused by the quasi-sliding mode and obtain a satisfactory decoupling performance. The stability and parameter robustness of the proposed strategy are also analyzed. Physical experimental results are presented to verify the validity of the method.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.5
• /
• pp.7-16
• /
• 2021

Purpose: This study intends to examine how VMI with consignment performs over time and find out its on-going impacts on the individual supply chain member's achievement. Research design, data, and methodology: This study formulates the mathematical model that represents two-stage supply chain system. By analyzing the numerical examples, this study compares VMI with consignment with the traditional system. Results: VMI with consignment eventually makes higher supply chain profit than the traditional system, even though it's early performance is poor. The influence of VMI with consignment on the performance of the supply chain member is distinct depending on the individual member and time. The consignment may not be helpful to increase the system profit, but it reduces the manufacturer's burden of costs. Conclusions: VMI with consignment improves the supply chain performance after all, and it still takes times until its benefit becomes fully realized. To be a successful collaboration program, VMI with consignment requires a carefully designed incentive scheme that provides the timely compensation to the individual supply chain members. This study also finds out that the consignment contract of this collaboration program plays a role of financially supporting the manufacturer at the early stage of its implementation.

• Journal of information and communication convergence engineering
• /
• v.21 no.2
• /
• pp.103-109
• /
• 2023

We investigated the antipodal-symmetric dispersion maps of a dispersion-managed link with a midway optical phase conjugator to compensate for the distorted 960 Gb/s wavelength division multiplexed (WDM) signal caused by these effects. The proposed antipodal-symmetric dispersion map has various shapes depending on the detailed design scheme. We confirmed that the dispersion-managed link designed with the dispersion map of the antipodal-symmetric structure is more advantageous than the conventional uniform dispersion map for compensating WDM channels. It was also confirmed that among the antipodal-symmetric structures, the dispersion map configured with the S-1-profile, in which S is inverted up and down, was more effective for distortion compensation than the dispersion map configured with the S-profile. In particular, we confirmed that the S-1-profile can broaden the optical pulse width intensively at a short transmission distance, more effectively compensating for the distorted WDM channel. Because this structure makes the intensity of the optical pulse relatively weak, it can decrease the nonlinear Kerr effect.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.896-904
• /
• 2004

In this paper, We present an efficient variable rate speech coder for spectral efficiency and packet processing technique for packet loss compensation of a voice codec with 10msec frame in VoIP service. Through disconnecting the users from the spectral resource during silence interval of about 60% period, a variable rate voice coder based on a voice activity detection(VAD) can increase spectral gain by two times. The performance of the method was analyzed by variation of detected voice activity factor and degraded speech frame ratio under various background noise level, and compared those of G.729B of ITU-T 8kbps standard speech codec. A method to compensate lost packets utilized addition of recovery data to a main stream and error concealment scheme for speech quality enhancement, the performance is verified by reconstructed speech quality. The proposed scheme can achieve spectral gain by two times or enhance speech quality by 3dB through reserved bandwidth of VAD. Therefore, the proposed method can enhance a spectral efficiency or speech quality of VoIP.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.571-578
• /
• 2002

In this paper, we propose a video sequence coding scheme called AMV (Auxiliary Motion Vector) to minimize error propagation caused by transmission errors over the Internet. Unlike the conventional coding schemes the AMY coder, for a macroblock in a frame, selects two best matching blocks among several preceding frames. The best matching block, called a primary block, is used for motion compensation of the destination macroblock. The other block, called an auxiliary block, replaces the primary block in case of its loss at the decoder. When a primary block is corrupted or lost during transmission, the decoder can efficiently and simply suppress error propagation to the subsequent frames by replacing the block with an auxiliary block. This scheme has an advantage of reducing both the number and the impact of error propagations. We implemented the proposed coder by modifying H.263 standard coding and evaluated the performance of our proposed scheme in the simulation. The simulation results show that AMV coder is more efficient than the H.263 baseline coder at the high packet loss rate.