• Asia pacific journal of information systems
• /
• 제16권2호
• /
• pp.27-46
• /
• 2006

As an extension of Technology Acceptance Models (TAM), the relative importance of perceived usefulness (PU) and perceived ease of use (PEU) in adopting two different mobile services are examined using service compatibility and user trust as moderating variables. This research shows that PEU is a relatively more important factor in the adoption of new mobile services when the new mobile services are highly compatible with existing services, while trust is an important influential factor in the adoption of services with a relatively low service compatibility. Trust does not significantly change the relative importance of PEU in the adoption of highly compatible mobile services, while the user's trust changes the importance of PU in the adoption process for the mobile services with relatively low service compatibility.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.55-65
• /
• 1997

The stress intensity factor has been calculated for the cracked plate subjected to remote normal stress and reinforced with a plate by symmetric spot welding. The solution was based on displacement compatibility condition between the cracked sheet and the reinforcement plate. It is shown that the results from the derived equation for stress intensity factor were agreed with previous solutions. The reinforcement effect gets better as a joining spot is closer to the crack tip and the other joining spots become nearer to the crack surface.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.934-939
• /
• 2004

Railway wheel/rail contact conditions have an influence on dynamic behavior of rolling stock. If there are problems of incompatibility between wheel and rail, damages like wheel wear, wheel spalling, rail wear, etc are occurred. Especially wheel and rail profiles are important factor of vehicle curving performance, so compatibility study between wheel and rail has to be carried out preferentially, In this study, we have analyzed the compatibility between wheel and rail of KNR conventional line to improve the maintenance efficiency of wheel and rail. Thus we showed the results relating to wheel/rail geometric contact, vehicle running performances as the change of wheel/rail combination.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.76-82
• /
• 2016

본 논문에서는 EMC(electromagnetic compatibility) 시험 규격 KN 61000-4-3 '방사성 RF 전자기장 내성 시험'에서 사용되는 균일장과 이를 바탕으로 하여 시험 시 균일하게 인가되는 전계강도에 대한 환경 변화 요소를 파악하여 방해요인을 분석한다.

• 한국응급구조학회지
• /
• 제17권3호
• /
• pp.73-86
• /
• 2013

Purpose: The purpose of this study is to provide the basic data for the ergonomic design of first-aid activity space(FAS) for a future ambulance suitable for the performance of 119 EMT. Methods: Questionnaire was filled out by the 124 EMT in 119 centers. The questionnaire consisted of 3 sub factors including the satisfaction and compatibility of the FAS. The satisfaction and compatibility was analyzed based on characteristics of the subjects. Results: The satisfaction rate of the FAS within the ambulance was an average of 2.23, and the compatibility category got an overall average score of 2.26. The lowest ranked criteria in the satisfaction and compatibility factor was the functionality of storage space showing 1.93 and 1.88, respectively. The best position of the paramedic seat was the top side of the patient, near the head, which is suitable for patient assessment and treatment. Conclusion: During patient transportation of 119 EMTs, for efficient work process, a layout design of the FAS should be based on ergonomics that satisfied the performance function.

• 한국산림과학회지
• /
• 제97권2호
• /
• pp.152-155
• /
• 2008

The Korean version of Perceived Restorativeness Scale was administered to 150 SanEum Recreational Forest visitors to investigate it's psychometric properties. Factor analysis revealed that the scale consists primarily of four factors related to compatibility, preference, being away and coherence. The internal consistency of the scale was positive. Based on these tests, it appears that the scale is a sound measure of restorativeness or psychological health benefits from forest experience.

• 한국정보시스템학회지:정보시스템연구
• /
• 제32권3호
• /
• pp.225-251
• /
• 2023

Purpose The purpose of this study is to examine the future direction of in-vehicle app development and service, the relationship between potential customers' intention to use and the factors that affect it was explored. It was also checked whether the two types of app development platform and the experience of the existing smartphone app platform had a moderating effect on these relationships. Design/methodology/approach Data was gathered through surveys, collecting responses from 904 potential consumers of vehicle app services in Korea. Structural equation modeling was utilized to analyze the data. Findings According to the empirical analysis result, it was found that potential customers considered enjoyment as the most important benefit factor in in-vehicle app service, and the most important external factor affecting enjoyment was functional compatibility with smartphone. The type of vehicle app development platform did not have a meaningful moderating effect on the factor relationship, whereas the smartphone app platform experience showed a meaningful moderating effect on the relationship between factors. It was analyzed that the risk of app performance, personal information privacy, and driving safety data did not have a negative effect on the intention to use the vehicle app service.

• 소성∙가공
• /
• 제3권2호
• /
• pp.215-228
• /
• 1994

The purpose of this paper is to pursue a general method to determine both the flow stress of a material and the friction factor by ring compression test. The materials are assumed to obey the expanded n-power hardening rule including the strain-rate effect. Ring compression is simulated by the rigid-plastic finite element method to obtain the database used in determining the flow stress and friction factor. The Simulation is conducted for various strain hardening exponent, strain-rate sensitivity, friction factor, and compressing speed, as variables. It is assumed that the friction factor is constant during the compression process. To evaluate the compatibility of the database, experiments are carried out at room and evaluated temperature using specimens of aluminum 6061-T6 under dry and grease lubrication condition. It is shown that the proposed test method is useful and easy to use in determining the flow stress and the friction factor.

• 한국IT서비스학회지
• /
• 제12권1호
• /
• pp.51-67
• /
• 2013

Mobile Instant Messenser (MIM) Market With the market is enlarging and attracting more and more companies. With the market expanding and number of users increasing, the competition in this area will be fierce. In order to gain competitive advantage, it is important to develop a strategy to maximize user value and to grasp the continuous usage intention of users. However, there are currently not enough researches done in this field. Therefore, this paper to study the effects of network externalities and perceived experiential value on perceived usefulness, user satisfaction, and continuous usage intention. The research results showed that the perceived experiential value and vertical compatibility significantly affected user satisfaction, but the perceived network size did not. The perceived network size and vertical compatibility did not affect the perceived usefulness. Also, the economic value, which is a sub-factor of the perceived experiential value, did not affect the perceived usefulness, but the functional value and hedonic value did significantly. The perceived network size significantly affected continuance usage intention, but the perceived network compatibility did not.

• Journal of Chest Surgery
• /
• 제26권2호
• /
• pp.80-85
• /
• 1993

Synthetic and biosynthetic vascular grafts of small diameter have long been considered to be prone to thrombosis, ultimately leading to the complete graft occlusion. Endothelial cell seeding onto synthetic blood-contacting surfaces has been suggested to be an ideal means to solve this problem. This study described a culture method of bovine endothelial cells and evaluated blood-compatibility and seeding efficiency of cultured endothelial cells. Bovine pulmonary artery endothelial cells were harvested enzymatically and grown to confluence on polystyrene culture flask surfaces using established techniques. The identification of endothelial cells was made through the demonstration of expression of factor VIII R:Ag by immunofluorescent technique. To quantitate the effect of improvement in blood-compatibility of viable endothelial cells, endothelial monolayers were exposed to blood containing $\^$111/In-oxine labeled platelets. Viable endothelial monolayers retained less labeled platelets than control surfaces. The Indium-labeled endothelial cells were seeded onto three different blood-contacting surfaces of Dacron vascular graft immobilized in specially equipped wells and incubated for specific time intervals (t=15, 30, 60, 120 minutes). Longer incubation times showed improved cell adherence in collagen-coated and fibrin-coated Dacron vascular graft groups. However in untreated Dacron grafts, no direct relationship was observed between incubation time and endothelial cell seeding efficiency. This may be due to leakage of endothelial cells through porosity of Dacron grafts in this in-vitro experimental condition.