• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.58-62
• /
• 2008

The need for position information in agriculture is gradually increasing for precise control farm vehicle and effective manage farm land. Though geomagnetic sensor has a lot of merits in estimating heading angle of vehicle because of low costs and sensing ability of magnetic north, it is easy that sensor outputs are distorted in electro magnetic field environment. This study was conducted to develop geomagnetic compass which could be available in measuring relative position from reference point correcting output distorted by external electro magnetic field in a small scale field. Magnetic inducing sensor (PNI's Vector2X) which wound enamel coated copper coil on ferrite core in order to measure and correct earth magnetic field. Magnetic azimuth was corrected using the algorithm which estimated amount of magnetic distortion from the difference between each outputs of magnetic sensors that located on the cross shaped base. Developed auto-tuning magnetic sensor was showed less then 5% as bearing accuracy in the strong magnetic field.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.65-72
• /
• 2010

In this study, the performances of a medium grade IMU which is aimed for Mobile Mapping System and a low grade IMU for pedestrian navigation are analyzed through simulations under GPS signal blockage. In addition, an analysis on the accuracy improvement of barometer, electronic compass, or multi-sensor(combination of barometer and electronic compass) to correct medium grade or low grade IMU errors in the situation of GPS signal blockage is performed. With the medium grade IMU, the three dimensional positioning error from INS exceeds the demanded accuracy of 5m when the block time is over 30 seconds. When we correct IMU with barometer, compass, or multi-sensor, however, the demanded accuracy is maintained up to 60 seconds. In addition, barometer is more effective than the electronic compass when they are combined. In case of low grade IMU like MEMS IMU, the three dimensional positioning error from INS exceeds the demanded accuracy of 20m when the block time is over 15 seconds. When we correct INS with barometer, compass, or multi-sensor, however, the demanded accuracy is maintained up to 15 seconds in simulation results. On the contrary to medium grade IMU, electronic compass is more effective than the barometer in case of low velocity such as pedestrian navigation. It is expected that the analysis suggested a method to decrease position or attitude error using aided sensor integration when MMS or pedestrian navigation is operated under 1he environment of GPS signal blockage.

• Journal of Power System Engineering
• /
• v.19 no.3
• /
• pp.36-41
• /
• 2015

The true north-finding equipment utilizing gyro sensor is used for INS(Inertial Navigation System) and has an increasing preference for gyro compass system due to compact size, lightening, low power and price. The purpose of this experiment is to research gyro compass system providing high performance in the field of manned or unmanned gyro compass system which proposes the accuracy of 1% utilizing experimented equipment at true north of the earth. Unlike the conventional system, the proposed gyro sensor system indicates to be applied in the various and specific equipment using multiple technique and method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1986-1991
• /
• 2007

In this paper, we discussed, intelligent soft filter for MR(magnetoresistive) sensor. Most navigation systems today use some type of compass to determine heading direction. Using the earth's magnetic field, electronic compass based on MR(magnetoresistive) sensors can electrically resolve better then 0.1 degree rotation. Intelligent methode for soft building a one degree compass using MR(magnetoresistive) sensors will also be discussed. Compensation techniques are shown to correct for compass tilt angels and nearby ferrous material disturbances. we proved the fuzzy logic that based on the way the ham deals with inexact information is useful for MR sensors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.865-871
• /
• 2011

Presently, the location and direction information are certainly needed for the autonomous vehicle of the ship. Among them, the direction information is a essential elements to automatic steering system. And the gyro-compass, the magnetic-compass and the GPS compass are the sensor indicating the direction. The gyro-compasses are mainly used in the large-sized ship of the GMDSS(Global Maritime Distress & Safety System). The precision and the reliability of the gyro-compasses are excellent but big volume and high price are disadvantage. The magnetic-compass has relatively fine precision and inexpensive price. However, the disadvantage is in the influence by the magnetism object including the steel structure of a ship, and etc. In the case of the GPS compass, the true north is indicated according to the change of the location information but in case of the minimum number of satellites or stopping of a ship or exercise in the error range, the exact direction cannot be obtained. In this paper, the performance of the GPS compass was improved by using the least-square curve fitting method for the mutual trade off of the angle sensor. The algorithm which improves the precision of an azimuth by applying the weighted value according to the size of covariance error was proposed with GPS-compass and magnetic compass. The characteristic and the performance of the proposed algorithm were analyzed and verified through experimentation. The applicability of the proposed algorithm was shown through the experimental result.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.545-548
• /
• 2018

본 논문에서는 모바일 디바이스의 GPS, Compass, Gyroscope Sensor를 이용하여 실외 공간의 위치를 찾아주는 실시간 AR 나침반을 제안한다. 제안 AR 나침반에서는 모바일 디바이스의 Sensor 이용하여 사용자의 위치와 방향, 실외 공간의 위치와 방향을 계산하여 안내 Object의 크기와 가시화 여부를 결정하고 보여줌으로 사용자가 실외 공간의 위치를 찾아갈 수 있도록 하는 나침반을 설계 구현하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.95-99
• /
• 1998

We introduce an autonomous flying system using a model-helicopter. A feature of the helicopter is that autonomous flight is realized on the low-cost compact model-helicopter. Our helicopter system is divided into two parts. One is on the helicopter, and the other is on the land. The helicopter is loaded with a vision sensor and an electronic compass including a tilt sensor. The control system on the land monitors the helicopter movement and controls. We firstly introduce the configuration of our helicopter system with a vision sensor and an electronic compass. To determine the 3-D position and posture of helicopter, a technique of image recognition using a monocular image is described based on the idea of the sensor fusion of vision and electronic compass. Finally, we show an experiment result, which we obtained in the hovering. The result shows the effectiveness of our system in the compact model-helicopter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.168-172
• /
• 2005

An autopilot system of a ship is very important for a safe and convenient navigation, which is realized with getting an azimuth data from a gyrocompass, a magnetic compass and a GPS(Global Positioning System) compass. Magnetic compass an azimuth error is generated by a vessel magnetism material such as steels. The magnetic pole is detected by the magnetic field sensor, it does not coincide with the true north, therefore, the detected azimuth data can not but accompany error. In this paper, in order to detect the minimum change of azimuth data which generates errors of azimuth information, a search algorithm using the Kalman Filtering method is utilized. The digital electronic compass is designed with the integration algorithm using the merits of an earth's magnetic field sensor and a GPS receiver.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.2
• /
• pp.1-11
• /
• 1991

The ship's magnetic compass even if corrected is feasible to indicate the erroneous information due to the change of this ship's magnetism. But if the north-seeking sensor of the transmitting magnetic compass system is located where the effect of the ship's magnetism is the least , that problem is expected to be removed. In this paper, as a basic research to enhance the accuracy and the stability of the ship's magnetic compass by placing the north-seeking sensor at the adequate location, the theoretical model for the overall ship's magnetism were studied from the macroscopic viewpoint, The parameters of the theoretical model were determined by the least square method on the assumption that the overall magnetism of a ship can be regarded as that of the prolate spheroidal magnetic body. The agreement between the modelled and the observed values was found to be good.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.29-36
• /
• 2004

The paper describes recent experimental results on the development of Digital Magnetic Compass (DMC), which can provide smart automatic correction functions to the magnetic interferences. The design methodology of magnetic sensing circuit with ring-core fluxgate sensor is represented. The performance results of the sensing circuits are discussed with error analysis by polynomial regressions. As test results, the sensing circuit filtered only the second harmonic signal that is proportional to the direction of earth's magnetic field, and it leads to the obtainment of bearing information. In addition, the total residual errors of DMC can be analyzed by the adoption of polynomial regressions. It shown that the possibility of high precise DMC, in the future.