• Journal of Science Education
• /
• v.42 no.2
• /
• pp.106-119
• /
• 2018

The purposes of this study were to develop a learner activity-centered science class program, apply it to the fourth-grade elementary students, and analyze its effects on their attitude towards science, academic achievement, and concept sustainability. To this end, the content of the fourth-grade elementary subject related to 'volcanoes and earthquakes' was reorganized through 12 periods, and the class was divided into two groups. Then, general science class was applied to the comparative group, and the learner activity-centered science class program including writing, making, and expressing was applied to the experimental group. In order to compare the two groups regarding attitude towards science, academic achievement, and concept sustainability before and after the application, mind map data was collected and analyzed based on mind map grading criteria. As a result of the post-test, the two groups showed statistically significant differences in all the sub-factors of attitude towards science, that is, recognition, ability, value, and interest sustainability, especially in interest sustainability. As for academic achievement, as a result of the post-achievement test, the experimental group had higher average scores than the comparative group, and it also showed improved scores compared to the pre-achievement test results. In addition, as a result of the post-achievement test, both the two groups showed statistically significant results. In the concept sustainability test after the post-achievement test, the experimental group had higher average scores than the comparative group in the areas of center circle, branches, and expression, which were the evaluation criteria for the mind map analysis, and the two groups showed statistically significant differences in the areas of center circle and expression, except for branches. In conclusion, learner activity-centered science class turned out to be effective on students' attitude towards science, academic achievement, and concept sustainability. If the learner activity-centered science class program is actively introduced and used in actual educational sites, it is expected to contribute to improving related classes.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.263-271
• /
• 2006

The purpose of this study was undertaken to compare ability of frozen-thawed sperm characteristics between two strains (miniature pig and Duroc). The semen was collected by gloved-hand method into a pre-warmed ($37^{\circ}C$) thermos bottle. The semen was diluted with same volume extender and added to LEY solution for freezing. The diluted semen was placed in 0.5 ml straws, and freezing was initiated by exposing the straws to liquid nitrogen ($LN_2$) vapours for 10 min before placing them into $LN_2$ for cryopreservation. The frozen-semen straw were thawed at 20, 37 and $50^{\circ}C$ for 1 min, 45 sec and 10 sec within water-bath. The semen sample were evaluated at 0, 3, 6, 9, and 12 h after incubation at $37^{\circ}C$ for analysis of sperm ability. Abnormality of spermatozoa in miniature pig was significantly (p<0.05) higher than that in Duroc at 0, 9 and 12 h of post-thawing incubation after frozen-thawing. The percentage of F-patterned spermatozoa in miniature pig was significantly (p<0.05) lower, while the percentage of AR (acrosome reacted spermatozoa) pattern was higher in the miniature than in the Duroc. On the other hand, there was no significant difference in the viability of spermatozoa thawed at different temperature ($20^{\circ}C\;and\;37^{\circ}C$) between two species, but the viability in miniature pig was higher (p<0.05) than in Duroc when sperm was thawed at $50^{\circ}C$. In conclusion, this study suggest that suitable freezing method for miniature pig semen is required for increasing post-thawing viability and fertilization capacity.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.222-231
• /
• 2005

Most of the tailings have been left without any management in abandoned metalliferous mines and have become the main source of heavy metal contamination of agricultural soils and crops in the these areas. To compare of environmental assessment of heavy metals in tailings derived from various 25-metalliferous mines in Korea, 3 different analysis methods such as water soluble, 0.1 M-HCl extractable, and total acid digestion method (aqua regia) were used. The chemical composition of water soluble in mine tailing were in the order ${SO_4}^{2-}>Ca^{2+}>Mn^{2+},\;Na^+,\;Al^{3+}>Mg^{2+},\;Fe^{3+}>Cl^-$. Specially, pH, EC, ${SO_4}^{2-},\;and\;Ca^{2+}$ concentrations in tailing varied considerably among the different mines. The average total concentrations of Cd, Cu, Pb, Zn, and As in tailing were 31.8, 708, 4,961, 2,275 and 3,235 mg/kg, respectively. Specially, the contents of Cd, Zn and As were higher than those of countermeasure values for soil contamination (Cd : 4, Zn : 700 and As : 15 mg/kg in soil) by Soil Environmental Conservation Act in Korea. The rates of water soluble heavy metals to total contents in tailings were in the order Cd > Zn > Cu > Pb > As. The rates of 0.1M-HCl extractable Cd, Cu, Pb, Zn, and As (1M-HCl) to total content were 17.4, 10.2, 6.5, 6.8 and 11.4% respectively. The enrichment factor of heavy metals in tailings were in the order As > Pb > Cd > Cu > Zn. The pollution index in tailing Au-Ag mine tailing were higher than those of other mine tailing. As a results of enrichment factor and pollution index for heavy metal contaminations in mine tailing of metalliferous mines, the main contaminants are mine waste materials including tailings.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.128-134
• /
• 2012

Purpose: The purpose of this study was to compare the screw joint stability between the CADCAM custom-made implant abutment and the prefabricated implant abutment by measuring the reverse torque value after cyclic loading. Materials and methods: Twelve screw type implants (Implantium, Dentium Co., Seoul, Korea) were embedded in aluminum cylinder with acrylic resin. The implant specimens were equally divided into 3 groups, and connected to the prefabricated titanium abutments (Implantium, Dentium Co., Seoul, Korea), CADCAM custom-made titanium abutments (Myplant, Raphabio Co., Seoul, Korea) and CADCAM custom-made zirconia abutments (Zirconia Myplant, Raphabio Co., Seoul, Korea). The CAD-CAM milled titanium crown (Raphabio Co., Seoul, Korea) was cemented on each implant abutment by resin cement. Before cyclic loading, each abutment screw was tightened to 30 Ncm and the reverse torque value was measured about 30 minutes later. After the crown specimen was subjected to the sinusoidal cyclic loading (30 to 120 N, 500,000 cycles, 2 Hz), postloading reverse torque value was measured and the reverse torque loss ratio was calculated. Kruskal-Wallis test was used for statistical analysis of the reverse torque loss ratio. Results: The CADCAM custom-made titanium abutments presented higher values in reverse torque loss ratio without statistically significant differences than the prefabricated titanium abutments ($P$>.05). Reverse torque loss ratio of the custom-made zirconia abutments was significantly higher compared to that of the prefabricated titanium abutments ($P$=.014). Conclusion: Within the limitation of the present $in-vitro$ study, it was concluded that there was no significant difference in screw joint stability between the CADCAM custom-made titanium abutments and the prefabricated titanium abutments. On the other hand, the CADCAM custom-made zirconia abutments showed lower screw joint stability than prefabricated titanium abutments.

• Korean Journal of Occupational Health Nursing
• /
• v.8 no.1
• /
• pp.22-41
• /
• 1999

This study intended to analyze the health promoting behaviors, compare their factors according to the shift pattern of duties of women workers who were working in the industrial workplace and present basic data in planning systematic and effective programs of health promotion for three-shift system and day-duty. Using Quota Sampling, 219 women workers were selected as subjects from 5 workshops which had 50 settled workers up to 300 and 10 factories which had more than 300 located in Taegu and Kyung-Book Province. Data were collected by means of questionnaire from September 12 to September 30, 1998. As the instruments of the study were used Health Promotion Lifestyle Profile(HPLP) which was adapted and adjusted by Seo, Y. O. for health promoting behavior, the one developed by Moon, J. S. (1990) for health-belief, the one developed by Sherer et al.(1982) and then adapted by Oh, H. S. for self-efficacy, and the one developed by Park, J. W. (1985) for social support. The analysis of data were performed with Cronbach's ${\chi}^2$-test, t-test, ANCOVA, Kendal tau, Pearson correlation, Stepwise Multiple Regression test using SPSS program. The results of the study are as follows : 1. There was a significant difference in age(${\chi}^2=32.46$, p=0.000), career (${\chi}^2=18.47$, p=0.000), working day(t=-3.18, p=0.000) by the shift pattern of duties in terms of socio-demographic characteristics. 2. There was a statistically significant difference between the two groups on the health promoting behaviors (t=2,52, p=0.012). The score of three-shift group on health promoting behaviors was 2.27, showing that it was lower by .13 than that of day-duty group(2.40). 3. ANCOVA involving age, career and working day as covariables, which had revealed significant difference before, showed that health promoting behaviors by the shift patterns of duties was significantly different(F=4.88, p=0.028). 4. In consideration of variables that have an influence on health promoting behavior by the shift pattern of duties, social support occupied 19.4% of health promoting behavior in the three-shift group and 22.5% including the sense of self-efficacy. In the day-duty group, social support occupied 34.4% of health promoting behavior. 5. The score of three-shift group(2.94) was significantly lower than that of day-duty group(3.12) in the perceived benefit of health-belief(t= -3.29, p=0.001), while the score of three-shift group (2.48) was significantly higher than that of day-duty group(2.24) in the perceived barrier (t=4.22, p=0.000). In the sense of self-efficacy(t=-4.20, p=0.000), the score of three-shift group(3.24) was significantly lower than that of day-duty group(3.53) while in social support(t=-4.56, p=0.000) the one of three-shift group(2.64) was significantly lower than that of day-duty group(2.88). The suggestions are as follows on the basis of the results of this study : 1. It is required to develop health promoting program that takes the shift pattern of duties of women workers into consideration. In addition, there are special demands on developing nursing strategies for health promoting behavior of three-shift workers. 2. It is required to develop specific strategies for social support which is the most significant factor to the health promoting behavior for women workers. 3. It is necessary to develop some programs for improving the sense of self-efficacy, social support, and health-belief of three-shift workers. To achieve these tasks, industrial nurses should play an active role and improve the ability of self-health care of women workers.

• Survey Research
• /
• v.6 no.1
• /
• pp.1-38
• /
• 2005

Considering the importance of corruption index measurement model and the diffusion of popular awareness about the importance of anti-corruption, this research compared and analyzed existing corruption index measurement models. This paper has selected "Anti-Corruption Index model(ACI model)" that was developed by Seoul Development Institute and "CCEJ's Corruption Index model" which is under use by the Citizens' Coaltion for Economic Justice. These two models were analyzed in terms of appropriateness of 'the indicator and index choice method', 'the research design' and 'the use of statistical data'. This analysis shows that two models have some problems. First, at the level of indicator and index choice method, the indicators of CCEJ's corruption index model is too atomized and redundant. As not putting weight of indicator, it did not consider importance of each indicator. Citizens who evaluated the level of corruption didn't participate in the weight evaluation team, which results in failure of the model to reflect the citizens' opinion. Also, because the question about Seoul Metropolis' corruption level is not included, it is not detected difference between real corruption level and perceptive corruption level. Second, in terms of appropriateness of research design, the sample of the CCEJ' corruption index model is too small to get credibility. The objectivity of research method seems to be low because survey was performed by exit interview. In addition, 38 items are overfull in the questionnire of CCEJ's corruption index model compare to 13 items in ACI model. Also, in making up questions, the terms are redundant and unobvious. Third, in regarding with feasibility of the statistical data, the CCEJ's corruption index model uses regulation data for disciplinary punishment of 25 local governments in Seoul from 1995 to 1999. But, it is common ideas of scholars that statistical data indicates the tip of an iceberg in corruption. So for using a statistical data, it needs a data of enough quantity and has a high level credibility. In addition, objective method of giving weight is not developed. In this point of view, the use of statistical data has some limits. To solve this problem, ① objective data should be included in the indicators, ② various indicators should be developed and ③ a method of giving weight should be improved.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.43-53
• /
• 2009

Objective: The purpose of this study was to compare the difference in three dimensional tooth movement using three different wire sizes($0.018{\times}0.025-in,\;0.016{\times}0.022-in$ 0.016-in) on a NiTi scissors-bite corrector. Methods: Computed tomography(CT) images of the experimental model before and after tooth movement were taken and reconstructed into three dimensional models for superimposition. The direction and the amount of tooth movement were measured and analyzed statistically. Results: The lingual and intrusive movements of the crown of the maxillary second molar were increased as the size of the NiTi wire increased. The roots of the maxillary second metals moved buccally except for the 0.016-in group. The intrusive movement of the roots of the maxillary second molars was increased as the size of the NiTi wire increased. Due to the use of orthodontic mini-implants, anchorage loss was under 0.2 mm on average. Conclusions: The $0.018{\times}0.025-in$ NiTi wire was most effective in lingual and intrusive movement of the maxillary second molar which was in scissors-bite position. Indirect skeletal anchorage with a single orthodontic mini-implant was rigid enough to prevent anchorage loss.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.378-385
• /
• 2013

Although dental hygiene has haven a special domain of knowledge and its own business territory, people have misunderstandings about dental hygienists as nurses or nirses' aides in Korea. Inadequate knowledge could make negative results for university applicants to choose department of dental hygiene. This study was aimed to compare major and job satisfaction of students and graduates in dental hygiene and nursing for objective comparison and suggestion for dental hygiene. The subjects were 98 dental hygiene students, 113 nursing students, 53 dental hygienists, and 53 nurses by convenience sampling in Daejeon. The questionnaire consisted of satisfaction of college life, social identity, career path and job. ANOVA with Tukey post-hoc analysis was used with SPSS 20.0 program. Although dental hygiene students scored lower than nursing students in satisfaction of college life, social identity, career path and job, dental hygienists, nurse and dental hygiene students didn't have different satisfaction of job. Dental hygienists scored the lowest in relation with clinical work and major curriculum, and sexual discrimination. Nurses scored the lowest in working condition and salary. Dental hygienists and dental hygiene students had lower scores in information and advice of career path, entrance to graduate school, stable work, family's pride of my major, social position and so on. We suggested the community of dental hygiene should try to promote dental hygienists to public, the community of dentists should give the stable working condition, and the department of dental hygiene should improve the major curriculum to relate with clinical work.

• Journal of dental hygiene science
• /
• v.17 no.6
• /
• pp.487-494
• /
• 2017

There is little evidence on the effects of environmental tobacco smoke (ETS) on prevalence of periodontal disease. The aims of this study were to explore the trends of prevalence of periodontal disease and types of exposure to smoke, including ETS according to the survey year, identify factors affecting periodontal disease, and compare the effect size of periodontal disease between active smokers and secondhand smokers. Data on 11,643 individuals were obtained from the fourth and fifth Korean National Health and Nutritional Examination Surveys. Information on exposure to ETS at home and work was self-reported. Severity of periodontal disease was evaluated using the community periodontal index. A multivariate logistic regression analysis was performed to model periodontal disease using types of smoking and the survey year. Overall, the prevalence of periodontal disease was 26.0% (n=3,029) and about 9% of the study population were secondhand smokers. The prevalence of periodontal disease among smokers was significantly increased according to smoking types by year. Active smokers showed a statistically significant adjusted odds ratio (aOR) for having periodontal disease except in the year 2007, whereas secondhand smokers had significant associations only in 2010 (aOR, 1.68; 95% confidence interval, 1.05 to 2.70) compared to non-smokers. For secondhand smokers, the statistical relationship of predicting periodontal disease was weaker than that of active smokers. However, ETS should separately be considered as an important risk factor for periodontal disease. This study suggested the need for further investigation of the impact of ETS on prevalence of periodontal disease using in-depth research designs and objective measurements for assessing periodontal disease and ETS.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.218-224
• /
• 2001

Olive flounder is one of the most important aquaculture species in Korea. Interest in the aquaculture of olive flounder has increased recently because of its good growth characteristics and high market price, However, the productivity of olive flounder aquaculture depends on economic inputs such as fuels, facilities, and labor, In this study, EMERGY concepts was used to compare the environment and economy of two olive flounder production methods, fishing fisheries and aquaculture, and to evaluate the sustainability of olive flounder production, EMERGY spelled with an 'm' is a universal measure of real wealth of the work of nature and society made on a common basis. Calculations of EMERGY production and storage provide a basis for making choices about environment and economy following. the general public policy to maximize real wealth, production and use. EMERGY flows from environment were $94.13\%$ for olive flounder fishing fisheries, and $2.20\%$ for aquaculture. EMERGY yield ratio, environmental loading ratio and sustainability index were 17.05, 1.02 and 274 for fishing fisheries and 0.06, 44.41 and 0.023 for aquaculture, respectively. These ratios indicate that the fishing fisheries will yield more net EMERGY, while the aquaculture requires a lower investment of EMERGY.