• Journal of Distribution Science
• /
• v.15 no.9
• /
• pp.5-16
• /
• 2017

Purpose - This research is to provide new insights for policy makers in Korea, comparing South Korea and foreign countries such as Japan, UK, France, Germany, Netherlands, Sweden, Spain and the forth, in terms of the effects of retail regulations on a retail trade industry. Research design, data, and methodology - After introduction, the research begins with literature review on the background why advanced countries have introduced retail legislations, then, will present their effects. The fourth section will compare the South Korea with the above foreign countries. Finally, the authors will draw conclusions and mention not only research limitations but also future research directions. Results - Based on the previous research, the authors compared Korea and advanced countries, in terms of how retail regulations influence retail employment, retail productivity, retail price, and the protection of independent retailers. The authors found that industrialized countries have made a significant effort to protect small shops for social stability with many different regulations and/or budget. With regard to results, however, the degree of its achievement is lower than expected. Conclusions - In order to protect small- and medium-sized retailers efficiently and effectively, policy makers need to develop better sophisticated retail regulations than those of advanced countries.

• Journal of Information Technology Applications and Management
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2017

For repairable software systems, the Mean Time Between Failure (MTBF) is used as a measure of software system stability. Therefore, the evaluation of software reliability requirements or reliability characteristics can be applied MTBF. In this paper, we want to compare MTBF in terms of parameter estimation using Makeham life distribution. The parameter estimates used the least square method which is regression analyzer method and the maximum likelihood method. As a result, the MTBF using the least square method shows a non-decreased pattern and case of the maximum likelihood method shows a non-increased form as the failure time increases. In comparison with the observed MTBF, MTBF using the maximum likelihood estimation is smallerd about difference of interval than the least square estimation which is regression analyzer method. Thus, In terms of MTBF, the maximum likelihood estimation has efficient than the regression analyzer method. In terms of coefficient of determination, the mean square error and mean error of prediction, the maximum likelihood method can be judged as an efficient method.

• Structural Engineering and Mechanics
• /
• v.81 no.4
• /
• pp.395-409
• /
• 2022

The presence of infill generally neglected in design despite the fact that infill contribution significantly increase the lateral stiffness and strength of the reinforced concrete frame structure. Several experimental studies and computational models have been proposed to capture the rational response of infill-frame interaction at global level. However, limited studies are available on explicit finite element modelling to study the local behavior due to high computation and convergence issues in numerical modelling. In the current study, the computational modelling of RC frames is done with various configurations of infill masonry in terms of types of blocks, lateral loading and reinforcement detailing employed with material nonlinearities, interface contact issues and bond-slip phenomenon particularly near the beam-column joints. To this end, extensive computational modelling of five variant characteristics test specimens extracted from the detailed experimental program available in literature and process through nonlinear static analysis in FEM code, ATENA generally used to capture the nonlinear response of reinforced concrete structures. Results are presented in terms of damage patterns and capacity curves by employing the finest possible detail provided in the experimental program. Comparative analysis shows that good correlation amongst the experimental and numerical simulated results both in terms of capacity and crack patterns.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1244-1249
• /
• 2023

Recently, the Kingdom of Saudi Arabia (KSA) announced the development of first-of-a-kind(FOAK) and most advanced futuristic vertical city and named as 'The LINE'. The project will have zero carbon dioxide emissions and will be powered by clean energy sources. Therefore, a study was designed to understand which clean energy sources might be a better choice. Because of its nearly carbon-free footprint, nuclear energy may be a good choice. Nowadays, the development of very small modular reactors (vSMRs) is gaining attention due to many salient features such as cost efficiency and zero carbon emissions. These reactors are one step down to actual small modular reactors (SMRs) in terms of power and size. SMRs typically have a power range of 20 MWe to 300 MWe, while vSMRs have a power range of 1-20 MWe. Therefore, a study was conducted to discuss different vSMRs in terms of design, technology types, safety features, capabilities, potential, and economics. After conducting the comparative test and analysis, the fuel cycle modeling of optimal and suitable reactor was calculated. Furthermore, the levelized unit cost of electricity for each reactor was compared to determine the most suitable vSMR, which is then compared other generation SMRs to evaluate the cost variations per MWe in terms of size and operation. The main objective of the research was to identify the most cost effective and simple vSMR that can be easily installed and deployed.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.36-36
• /
• 2020

Symplocos Jacq. including about 350 species is the sole isolated genus of the family Symplocaceae. Despite poorly documented species delimitation and unresolved taxonomic nomenclature four species of Symplocos (S. coreana, S purnifolia, S sawafutagi, and S. tanakana) have been described in Korea. In this study, we carried the comparative wood anatomy of all the four species of Korean Symplocos to understand the wood anatomical variations within these four species. The result of this study indicated that Korean Symplocos are comparatively indistinguishable in terms of their qualitative wood features except for exclusively uniseriate rays present in S. purnifolia instead of uni- to- multiseriate in other three species. However, discrepancies are observed in quantitative wood variables such as vessel density, vessel size, and ray density. The vessel density of S. purnifolia (highest among the four species) is more than two times higher than the S. sawafutagi (lowest among the four species) and S. tanakana. On the other hand, vessel size is likewise reverse to the vessel number relationships i. e. vessel circumference and diameter in both planes of S. sawafutagi and S. tanakana is almost twice a larger than S. purnifolia. Interestingly, S. coreana remains in between of these two groups in terms of vessel features and closer to S. purnifolia in terms of ray density. The cluster analysis based on the paired group (UPGMA) algorithm using the Euclidean similarity index clearly differentiates S. purnifolia from the rest of the taxa representing the first isolated clade of the tree.

• Journal of the Korean housing association
• /
• v.1 no.2
• /
• pp.49-66
• /
• 1990

This study is a case study to grasp residents` trade-off preference and opinions for selected interior environmental attributes of muilti-family housing. Interiew with structured questionnaire was carried out through pilot and main survey. On the basis of the result of pilot survey, interior environmental attributes for the main survey were selected. Selected attributes were the size of each residential room, the degree of openness between two rooms and interior facilities. Among them, trade-off approach was applied to the size of each residential room and interior facilities. For the main survey. 45 housewives living in 31 pyung apartment of a selected construction company to grasp the residents` trade-off preference and opinions on the selected attributes. In terms of the size of each room, subjects wanted the room to be lager, whereas master bedroom smaller, and family bathroom larger, wheareas toilet near master bedroom smaller. In terms of the degree of openness between two rooms, the present degree of openness between private and service area such as living room and balcony, and second bedroom and adjacent balcony need to be more open, whereas the present degree of openness between living room and dining room and between living room and kitchen need to be more closed. The comparative orders of important intems were the ventilation facility in the bathroom, drying poles for clothes in the balcony, interior landscape, and workable for hand washing clothes. In conclusion, measurement of preference using trade-off approach about selected interior environmental attributes in post-occupancy evaluation was regarded as a promising evaluation method to grasp the practical and comparative preference under constraints comparing to the typical existing methods.

• The Korean Journal of Community Living Science
• /
• v.23 no.3
• /
• pp.317-328
• /
• 2012

In this study, printing was introduced to the common dip-dyeing method of persimmon juice dyeing so as to develop two different colored persimmon juice dyed fabrics with printings of 'jorangmal' patterns (a national monument) instead of producing a plain textile. Following are the results of a comparative study between the persimmon dyed fabric and undyed fabric, both with printings, in terms of its properties, and hand values. Cotton and rayon were chosen as samples and were compared separately. Firstly, the samples showed differences in terms of clarity and visual sensation depending on the presence of persimmon dye, even if the same pattern and color was used. Secondly, the air permeability of two samples improved after persimmon dyeing even though their thickness increased, and their moisture regain increased as well in all humidity conditions. Thirdly, protectiveness against UV increased in dyed samples, and sweat, sunlight, and compound colorfastness improved in printed dye-fabrics compared to plain dyed ones. Therefore, printing proved to be effective in preventing discoloration. Fourthly, tensile linearity and resilience, bending rigidity, compressive linearity and resilience, and shearing stiffness increased more in the dyed samples compared to undyed ones. However, shearing recovery decreased in both dyed fabrics. Fifthly, the result of its hand value showed that Koshi value increased in all samples than undyed ones, whereas Fukurami, Numeri, and Softosa values decreased. Incorporating printing in persimmon dyeing process could expect creative outcomes not only in today's diverse fashion but in areas of arts or crafts as well.

• Journal of Oriental Neuropsychiatry
• /
• v.7 no.1
• /
• pp.15-37
• /
• 1996

This thesis investigates 220 female students ranging from 19 to 26 years old attending universities in the Wonju area to determine the correlations between mental health and the density of serum iron . According to their serum iron levels, they were divided into three groups and analyzed with the GARS Scale Assessment and the THI Test Assessment. The results are as follows;1. On the comprehensive GARS Scale tests, for all groups, task, occupation and levels of university-related frustration(1) marked the highest scores.2. On the comparative assessment of each group's GARS Scale scores, Group A showed higher stress perception in terms of personal relationship(2,3) than any orther groups. 3. On the comprehensive THI test scores coverring all groups, Multiple subjective symptoms(I) marked the highest scores. 4. On the comparative assessment of each group's THI test scores, Group A showed higher Multiple subjective symptoms(I) and Irregularities of life(G) than any orther groups.5. Comparing and analyzing the GARS Scale Assessment and the THI Test, we found that Group A showed high stress perception, which may cause psychosomatic diseases such as 'yu zheng(鬱證;melancholia). With those results, we can see that the contant of serum iron is correlated to stress perception and the condition of mental health. In the future studies using the GARS Scale and the THI Test, it will be necessary to examine more subject groups in terms of multi-aspects and to investigate the standard group in more detail.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.11
• /
• pp.39-49
• /
• 2014

Volcanic rocks in Jeju island show vesicular structure caused by various environmental factors, and indicate the differences in geological and mechanical characteristics from region to region. Previous studies on the volcanic rocks in Jeju island have been actively conducted on geological and chemical properties in terms of geophysics and geology and on physical and mechanical properties in terms of engineering. But comprehensive comparative analysis on physical and mechanical properties of volcanic rocks in Jeju island is not conducted. In this study, the physical and mechanical properties of volcanic rocks in Jeju island were compared and analyzed comprehensively through the existing research papers and reports about volcanic rocks in Jeju island. As a result, it was found that the relationship between absorption (porosity) and apparent specific gravity is commonly linear and could be represented as two different linear approximations. In addition, it was found that the relationship between P-wave velocity and S-wave velocity and the relationship between absorption (porosity) and uniaxial compressive strength could be classified more clearly, considering two different linear relationships in absorption (porosity) and apparent specific gravity.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.4
• /
• pp.31-44
• /
• 2014

In the present study, a few of recently developed geostatistical models are comparatively studied. The models are two-point statistics based sequential indicator simulation (SISIM) and generalized coupled Markov chain (GCMC), multi-point statistics single normal equation simulation (SNESIM), and object based model of FLUVSIM (fluvial simulation) that predicts structures of target object from the provided geometric information. Out of the models, SNESIM and FLUVSIM require additional information other than conditioning data such as training map and geometry, respectively, which generally claim demanding additional resources. For the comparative studies, three-dimensional fluvial reservoir model is developed considering the genetic information and the samples, as input data for the models, are acquired by mimicking realistic sampling (i.e. random sampling). For SNESIM and FLUVSIM, additional training map and the geometry data are synthesized based on the same information used for the objective model. For the comparisons of the predictabilities of the models, two different measures are employed. In the first measure, the ensemble probability maps of the models are developed from multiple realizations, which are compared in depth to the objective model. In the second measure, the developed realizations are converted to hydrogeologic properties and the groundwater flow simulation results are compared to that of the objective model. From the comparisons, it is found that the predictability of GCMC outperforms the other models in terms of the first measure. On the other hand, in terms of the second measure, the both predictabilities of GCMC and SNESIM are outstanding out of the considered models. The excellences of GCMC model in the comparisons may attribute to the incorporations of directional non-stationarity and the non-linear prediction structure. From the results, it is concluded that the various geostatistical models need to be comprehensively considered and comparatively analyzed for appropriate characterizations.