• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.173-183
• /
• 2015

The aim of this study was to develop a soil moisture simulation model equipped with meteorological data enhanced by WRF (Weather Research and Forecast) model, and this soil moisture model was applied for quantifying soil moisture content and irrigation requirement. The WRF model can provide grid based meteorological data at various resolutions. For applicability assessment, comparative analyses were conducted using WRF data and weather data obtained from weather station located close to test bed. Water balance of each upland grid was assessed for soils represented with four layers. The soil moisture contents simulated using the soil moisture model were compared with observed data to evaluate the capacity of the model qualitatively and quantitatively with performance statistics such as correlation coefficient (R), coefficient of determination (R2) and root mean squared error (RMSE). As a result, R is 0.76, $R^2$ is 0.58 and RMSE 5.45 mm in soil layer 1 and R 0.61, $R^2$ 0.37 and RMSE 6.73 mm in soil layer 2 and R 0.52, $R^2$ 0.27 and RMSE 8.64 mm in soil layer 3 and R 0.68, $R^2$ 0.45 and RMSE 5.29 mm in soil layer 4. The estimated soil moisture contents and irrigation requirements of each soil layer showed spatiotemporally varied distributions depending on weather and soil texture data incorporated. The estimated soil moisture contents using weather station data showed uniform distribution about all grids. However the estimated soil moisture contents from WRF data showed spatially varied distribution. Also, the estimated irrigation requirements applied WRF data showed spatial variabilities reflecting regional differences of weather conditions.

• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.237-244
• /
• 2011

In this paper, a feature-based registration technique is proposed for pre-contrast and post-contrast lung CT images. It utilizes three dimensional(3-D) features with their descriptors and estimates feature correspondences by nearest neighborhood matching in the feature space. We design a transformation model between the input image pairs using a free form deformation(FFD) which is based on B-splines. Registration is achieved by minimizing an energy function incorporating the smoothness of FFD and the correspondence information through a non-linear gradient conjugate method. To deal with outliers in feature matching, our energy model integrates a robust estimator which discards outliers effectively by iteratively reducing a radius of confidence in the minimization process. Performance evaluation was carried out in terms of accuracy and efficiency using seven pairs of lung CT images of clinical practice. For a quantitative assessment, a radiologist specialized in thorax manually placed landmarks on each CT image pair. In comparative evaluation to a conventional feature-based registration method, our algorithm showed improved performances in both accuracy and efficiency.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.2
• /
• pp.215-223
• /
• 2005

Non-thermal plasma decomposition of gas-phase styrene was investigated in this study using three different types of plasma reactors; dielectric-barrier discharge (DBD) reactor, surface discharge (SD) reactor and plasma-driven catalyst (PDC) reactor packed with 2.0 wt% $Ag/TiO_2$ catalysts. The main parameters used for the comparative assessment of the plasma reactors include the decomposition efficiency, carbon balance, byproduct distribution, COx ($CO+CO_2$) selectivity and COx yield. The SD and the DBD reactors showed better conversion efficiency of styrene than that of the PDC reactor due to their larger capability in ozone formation. On the other hand, the PDC reactor showed better carbon balance, the yield and the selectivity of COx. The required specific input energies to achieve 100% carbon balance from the decomposition of 100 ppmv styrene using the plasma alone reactors and the PDC reactor were 420 J/L and 110 J/L, respectively. The major decomposition products in gas-phase were CO, $CO_2$ and HCOOH regardless of the types of plasma reactors. In the case of SD and DBD reactors, the $CO_2$ selectivity ranged in $39.5{\sim}60%$. The $CO_2$ selectivity in the PDC reactor was in range of $68.5{\sim}75.5%$.

• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.393-401
• /
• 2005

The purpose of this study was to compare the canal configuration after shaping by ProTaper rotary files and ProTaper hand files in resin simulated canals. Forty resin simulated canals with a curvature of J-shape and S-shape were divided into four groups by 10 blocks each Simulated root canals in resin block were prepared by ProTaper rotary files and ProTaper hand files using a crown-down pressureless technique All simulated canals were prepared up to size $\#25$ file at end-point of preparation. Pre- and post-instrumentation images were recorded with color scanner. Assessment of canal shape was completed with an image analysis program. Measurements were made at 0, 1, 2, 3, 4, 5, 6 and 7 mm from the apex. At each level, outer canal width, inner canal width, total canal width, and amount of transportation from original axis were recorded. Instrumentation time was recorded. The data were analyzed statistically using independent t-test. The result was that ProTaper hand files cause significantly less canal transportation from original axis of canal body and maintain original canal configuration better than ProTaper rotary files, however ProTaper hand files take more shaping time.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.484-492
• /
• 2019

The aim of the present study was to compare the cold tolerance of seven different types of trees growing in southern Korea to select evergreen broad-leaved trees that can be used as street trees in large land areas experiencing climate change. The trees compared were the thorn tree, Cinnamomum camphora, Camellia japonica, Machilus thunbergii, Dendropanax morbifera, Daphniphyllum macropodum Miq., Quercus glauca Thunb., and Raphiolepis indica. When the trees were subjected to low temperature treatment, their electrolyte elution volume values appeared to increase with the decreases in the treatment temperature. The analysis of the cold tolerance of each type of tree was based on the estimated temperatures in the following order: C. japonica (-11.586℃) > R. indica (-9.348℃) > Q. glauca (-8.719℃) > M. thunbergii (-8.090℃) > D. macropodum (-7.409℃) > D. morbifera (-7.085℃) > C. camphora (-6.995℃). The relative cold tolerance difference found in the seven tree species was more than 5℃, as evaluated previously. In the Lauraceae family, the difference in cold tolerance was more than 2℃, even in the same species. The analysis showed that trees with excellent cold tolerance included Q. glauca Thunb., C. japonica, R. indica, and the thorn tree. This knowledge is required for the evaluation of the possibility of the survival of trees under cold temperature conditions in cities.

• Journal of Radiation Protection and Research
• /
• v.40 no.2
• /
• pp.101-109
• /
• 2015

Alpha spectrometry is typically used for the assessment of uranium particle concentrations and its accuracy can be directly related to the accuracy in which the radiochemical pre-treatment is conducted. Ashing and alkali fusion methods are typically used but the ashing method requires longer analysis time and the alkali fusion method is extremely costly. Therefore, a new pre-treatment method using ultrasonic cleaning was developed and its experimental result was compared against the two conventional methods in terms of pre-treatment time, convenience, cost, and recovery rate of a target material. The results that were obtained by the conventional methods(ashing and alkali fusion) and the new method were compared. Consequently, even though the shorter pre-treatment time was required, the new technique showed almost same recovery rate comparing with two conventional methods. The new method was also featured by its relatively lower cost and a simpler process than two conventional methods.

• Journal of The Korean Association For Science Education
• /
• v.33 no.5
• /
• pp.1021-1040
• /
• 2013

In order to explore the influences of coteaching through mentoring upon the teaching professionalism of beginning science-gifted education teachers, this case study deeply investigated the change processes in the aspects of pedagogical content knowledge (PCK). Two beginning teachers planned, performed and reflected together their science instructions for science-gifted students in secondary school during four 3-hour classes. Since the second instruction, pre-, during-, and post-mentoring were conducted, we collected various data related to teachers' planning processes, videotaped all coteaching science classes, and wrote field notes. We also recorded in-depth interviews with the teachers and the whole process of mentoring. All the data were analyzed by using the constant comparative method. The results of the analyses indicated that coteaching through mentoring positively changed the teachers' PCK. Above all, we found that coteaching and mentoring strategies generated a significant synergy effect through a mutually complementary relationship. The teachers developed deep practical knowledge about the enrichment curriculum, which placed more emphasis on developing cognitive and/or affective characteristics of science-gifted students. The teachers also improved their knowledge about the characteristics of science-gifted students and the instructional strategies appropriate for developing them. Moreover, practical knowledge about assessment domains and methods used in science-gifted education were improved. Knowledge on science content necessary for effective inquiry instruction was also improved.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.178-185
• /
• 2015

Purpose: The purpose of this study was to conduct a comparative assessment on the satisfaction level for the two interfaces of surgical guide system (SimPlant and R2GATE), the design and convenience of manufactured surgical guides and the importance of using the surgical guides thereof by means of survey. Materials and Methods: Hereupon, they simulated the implant surgical process by mounting the two manufactured systems of surgical guide on a dental mold, respectively. The study subjects were instructed to complete the questionnaire as to the satisfaction level upon completion of the simulated surgery. This study summarized the data of each question after collecting the completed questionnaires. Then, this study analyzed the summarized data by utilizing statistical program SPSS 20.0 (IBM). Results: R2GATE had a higher value of the satisfaction level on the design and convenience of manufactures surgical guides. R2GATE group ($7.33{\pm}1.26$) was found to have a higher value in terms of the overall satisfaction level compared to SimPlant group ($6.67{\pm}1.26$) (${\alpha}$ = 0.05). Conclusion: The user satisfaction level on the surgical guide manufactured for R2GATE system was to such an extent as it can be widely used in clinical environment. Moreover, the surgical guide manufactured as R2GATE system can guide both the length and direction of a drill simultaneously. As a result, it is highly recommended for those beginners who do not have a lot of experience in implant placement.

• International Commerce and Information Review
• /
• v.18 no.1
• /
• pp.55-78
• /
• 2016

This paper discusses on Electronic Payment System between U.S.A. and Canada. In particular, I focused on ACSS compare with FedACH(Fed Automated Clearing House) to advance a research effects. Because both of them is a low-value, high-volume retail payment system which their countries represent. The ACSS(Automated Clearing Settlement System) is the system through which the vast majority of CPA payment items are cleared, through various payment streams. In 2014, ACSS system cleared approximately 6.8billion payments worth a total value of $ 44.9 trillion. While, The FedACH Network are the center of America Commerce, moving more than $40 trillion each year. That's made up of almost 23 billion electronic financial transaction, including direct deposit via ACH, social security and government benefits, electronic bill payments such as utility and mortgage payments. Thus in this article, first of all, I considered features of payment system and the types of payment items between ACSS and FedAch. Second, I analyzed the status of central bank and legal background. Third, I focused on the operational policy and risk aversion policy. Lastly, I suggested that their payment and banking system have to assume, with good reason, more efficiently accurately and securely operation to protect their customer from credit risk and financial fraud.

• Journal of Korean Academy of Nursing
• /
• v.25 no.3
• /
• pp.399-418
• /
• 1995

The purpose of this study was to investigate the stress response of nurses working on psychiatric wards (psychiatric nurses) compared with that of nurses working on general wards (general nurses) in order to provide assessment data for intervention of the stress response. The Symptoms of Stress Inventory was used to measure the stress response. Data were collected by a direct survey method using a questionnaire and were collected from March first to March 30, 1995. A sample of 200 nurses working in three psychiatric hospitals and psychiatric wards in four university hospitals in Seoul and Kangwon province were selected and 200 nurses working on general wards from two general hospitals in Seoul were also selected for a total sample of 400 nurses. Nurses who had experienced more than one of the major life events in the last two years were excluded from the total number in the samples, so the final sample was 161 psychiatric nurses, and 169 general nurses. The Scores for the total stress response, scores of the SOS subscales, stress response by sociodemographic characteristics of the nurses working on the psychiatric wards were compared with those of nurses working on the general ward. The results of this investigation are as follows 1. The mean total SOS score for the psychiatric nurse was 0.81 (SD=0.48) and that of the general nurses was 0.90(SD=0.53). 2. The Mean score for peripheral manifestation, con tral-neurological symptoms, gastrointestinal symptoms, muscle tension, habitual patterns, de-pression, anxiety, anger and cognitive disorganization for the general nurses showed a tendency to be higher than those of the psychiatric nurses. Mean score for cardiopulmonary symptoms for the general nurses was significantly higher than that of the psychiatric nurses. 3. The mean scores for the sixteen SOS items for the general nurses was significantly higher than for the psychiatric nurses. The 16 items were flushing of the face, sweating excessively even in cold weather, thumping of the heart, rapid breathing, dry mouth, a choking lump in the throat, hoarseness, muscle tension in hands or arm, muscle tension in leg, working tiring one out completely, severe aches a핀 Pain make it diffi-cult to do the work, severe nervous exhaustion, worrying about health, feeling weak and faint, so upset that one wants to hit something, unable to keep thoughts from running through one's mind. The mean score of only 505 item were significantly higher for the psychiatric nurses. 4. Stress responses between psychiatric nurses and general nurses were significantly different according to the following demographic characteristics : marriage, duration of work, position, accommodation, planning to move into another working site, working ward, education in psychiatric nursing.