Kishi, Yoshikazu;Miyashita, Yasuhide;Manabe, Yasuo;Fujikawa, Takao
한국분말야금학회:학술대회논문집
/
한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
/
pp.1259-1260
/
2006
Intensive technological research on the Dry-bag CIP equipment was carried out to improve the dimensional accuracy and the productivity. The rubber mold design technology using FEM simulation during pressing was introduced, in order to achieve higher dimensional preciseness, and criteria for the selection of the In-line type or Off-line type, were established based on the powder flowability index proposed by Carr. Based on these research results, high productivity Off-line Dry-bag CIP equipment, which can realize good dimensional accuracy with high productivity, was developed even for non-granulated powders with poor packing density.
적설의 다짐강도에 대한 부가물의 효과를 고찰하기 위한 연구가 수행되었다. 본 연구의 목적은 본 연구에서 얻은 결과를 토대로 적설의 압착과정을 촉신시키고 나아가서 남극의 설상로나 설상활주로 등의 다짐강도를 증진시키는 데 있다. 실험실에서의 실험결과에 의하면 처리된 눈에 소량의 톱밥을 섞었을때 더 큰 강도를 얻을 수 있다는 것을 알 수 있었으며, 이 방법은 남극과 McMurdo 설상로에 있는 시험도 에서 실제 적용되었다. 현지 실험에서 얻은 자료를 분석한 결과 적설의 고결은 일반적으로 예측되는 극한 환경에서 보다 빨리 진행되었으며, 궁극적으로 큰 지장없이 육중한 운송장비를 지지할 수 있는 충분한 다짐강도를 얻을 수 있다는 것을 알 수 있었다.
Park, Seong-Jin;Johnson, John L.;German, Randall M.
한국분말야금학회:학술대회논문집
/
한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
/
pp.362-363
/
2006
Nano-structured tungsten carbide compacts with cobalt matrices (WC-Co) offer new opportunities for achieving superior hardness and toughness combinations. A unified modeling and simulation tool has been developed to produce maps of sintering pathways from nanocrystalline WC powder to sintered nano-structured WC-Co compacts. This tool includes (1) die compaction, (2) grain growth, (3) densification, (4) sensitivity analysis, and (5) optimization. All material parameters were obtained by curve fitting based on results with two WC-Co powders. Critical processing parameters are determined based on sensitivity analysis and are optimized to minimize grain size with high density.
In this article, the vibration response of elastic nanocomposite beams with enhanced damping by nanoparticles is presented based on the mathematical model. Damp construction is considered by spring and damper elements based on the Kelvin model. Exponential shear deformation beam theory (ESDBT) has been used to model the structure. The mixed model model is used to obtain the effective properties of the structure including compaction effects. Using the energy method and Hamilton's principle, the equations of motion are calculated. The beam frequency is obtained by analytical method. The purpose of this work is to investigate the effect of volume percentage of nanoparticles and density, length and thickness of the beam on the frequency of the structure. The results show that the frequency increases with the increase in volume percentage of nanoparticles.
중저준위 방사성폐기물 처분장 되메움재 후보물질로 제안되고 있는 국산 천연점토와 분쇄암석의 혼합물의 수리특성을 조사하였다. 혼합물의 수분함량 변화에 따른 혼합물의 밀도 변화를 조사하여, 동일 압축력 하에서 최대밀도를 얻을 수 있는 최적수분함량을 찾고자 하였으며, 혼합물 중의 점토함량에 따른 수리전도도 변화를 조사하였다. 혼합물 중 점토함량이 감소할수록 얻어 지는 최대밀도가 증가하였으며, 최적수분함량도 보다 명확해졌으나, 혼합물의 밀도는 수분함량에 그다지 민감하지 않았다. 혼합물의 수리전도도는 점토 함량이 감소할수록 증가하여 건조밀도 1.2 Mg/㎥ 일 때 100% 점토인 경우의 3 $\times$$10^{-12}$ m/s에서 25% 점토함량의 경우에는 7 $\times$$10^{-10}$ m/s로 증가하였으나, 건조밀도가 1.5 Mg/㎥ 일 때에는 25% 점토함량의 경우에도 5 $\times$$10^{-12}$ m/s 의 낮은 값을 유지하였다. 혼합물의 수리전도도 추장을 위한 유효점토건조밀도 개념이 제안되었으며. 이 개념은 다양한 건조밀도와 분쇄암석 함량을 가진 혼할물의 수리전도도를 잘 설명할 수 있었다.
고준위폐기물처분장에서 갭채움재는 완충재와 뒷채움재의 성능을 좌우하는 중요한 공학적방벽의 구성요소이다. 본 논문에서는 갭채움재에 대한 해외 기술현황을 조사하고, 이를 통하여 갭채움재의 개념, 제조기술, 성형특성, 설치기술에 대한 연구결과들을 정리하였다. 갭채움재 개념은 처분방식과 처분개념에 따라서 나라마다 약간씩 차이가 있었다. 갭채움재 물질로는 대부분 벤토나이트를 사용하였고, 충전제로 점토를 사용하였다. 갭채움재는 펠렛, 과립상, 또는 펠렛-과립상 혼합물의 형태로 사용되었다. 갭채움재 펠렛 제조에는 정압축, 롤러압축, 압출-컷팅 방법 등이 사용되었으며, 이 중, 실험과 실제 현장에서의 펠렛 소요량을 감안하여 많은 나라들이 롤러압축방법과 압출-컷팅방법에 대한 기술 확보에 집중하였다. 펠렛 성형특성 실험결과, 펠렛의 건조밀도와 건전성은 수분함량, 구성물질, 제조방법, 펠렛 크기에 민감하였고, 제작 시 압축하중에는 상대적으로 덜 민감하였다. 갭채움재의 설치방법으로는 수직처분공 완충재 갭에서는 부어넣기(pouring) 방법, 붓고 다지기(pouring and tamping) 방법, 진동을 주며 부어넣기(pouring with vibration) 방법 등이 시도되었으며, 수평처분공 완충재와 처분터널의 뒷채움재 갭에서는 숏크리트 기술을 이용한 불어넣기(blowing by use of shotcrete technology) 방법과 오거를 이용한 정치 및 다지기(auger placement and compaction) 방법 등이 시도되었다. 그러나 이 방법들은 아직 기술적으로 초기단계에 있어 앞으로도 계속적인 연구가 이루어질 것으로 예상되었다.
본 연구에서는 락필댐 축조재에 대하여 대형 삼축압축시험 및 대형 오이도미터시험을 실시하고 재료의 전단강도 및 압축 특성에 관하여 조사하였다. 삼축압축시험시 재료의 다짐도 및 구속압을 변화시켜 이에 따른 재료의 전단거동 및 강도특성을 조사하였고 오이도미터 시험을 통하여 일정 단위중량의 입도분포 및 함수상태가 다른 재료의 파쇄 및 압축성을 관찰하였다. 삼축압축시험결과 다짐도 및 구속압에 따라 재료의 전단팽창성에 차이가 나타나고 이들 조건들이 전반적인 거동 및 전단강도에 영향을 미치는 것으로 나타났다. 오이도미터시험결과 재료의 평균입자크기의 증가와 함께 파쇄율이 증가하고 입도분포가 상대적으로 양호한 시료의 압축성이 적은 것으로 나타나 일반적인 조립재의 압축특성을 잘 반영하는 것으로 나타났다. 그리고 포화시료가 건조시료에 비하여 다소간 높은 압축성을 나타내었으며 접선구속계수 산정결과 포화시료의 계수값이 건조시료에 비하여 평균적으로 10$\~$20$\%$ 큰 것으로 나타났다.
천연 골재자원의 고갈로 인해 송배전관로 되메움재의 대체골재로서 재생 순환골재 이용에 많은 관심이 집중되고 있다. 그러나 순환골재를 송매전관로 메움재로 적용하기 위해서는 물리적, 열적 특성 규명이 선행되어야 한다. 본 논문에서는 송배전관보 되메움재로 활용하기 위한 폐콘크리트 순환골재의 적용성을 평가하였다. 각 지역에서 채취한 순환골재와 대조군인 일반 강모래를 대상으로 실내다짐시험을 수행한 후, 비정상 열선법과 비정상 탐침법을 이용하여 열저항을 측정하였다. 저함수비 구간에서 비정상 탐침법을 이용한 열저항 측정값은 탐침관입에 따른 시료교란 효과로 인해 비정상 열선법보다 상대적으로 크게 측정되었다. 전체 순환골재의 열저항 측정 결과, 대조군인 강모래와 유사하게 함수비 증가에 따른 열저항의 감소를 보였다. 또한, 기존 열전도도(열저항) 예측 모델에 의한 열저항 예측값과 순환골재의 측정 결과를 비교하였으며, 순환골재에 열저항 예측에 적합한 예측식을 제안하였다. 본 연구결과를 바탕으로 재생 순환골재를 송배전판로 되메움재로 활용 가능함을 알 수 있다.
본 연구에서는 기존의 전통적인 다짐관리방법의 문제점을 보완하고자 TDR(Time Domain Reflectometry)을 이용하여 지반의 함수비와 건조단위중량을 측정하는 연구를 수행하였다. Flat TDR 시스템은 지반의 교란을 일으키기 않는 장비로써 측정값을 검증하기 위하여 주문진표준사 외 7개소의 현장대상 지반의 시료에 대하여 건조밀도와 함수비를 측정하였다. 함수비구간은 3, 6, 9, 12, 15, 18%의 6개 구간으로 나누어 측정을 하였으며 실험결과는 통일분류법에 따라 확인하였다. 실내실험 결과, 함수비는 SP시료의 경우 약 0.7%, SM시료의 경우 약 1.3%의 오차를 보였다. 또한 건조단위중량은 SP시료의 경우 약 7%, SM시료의 경우 약 5%의 오차를 확인하였다. 이는 점토나 자갈을 제외한 모래 또는 실트질 모래 지반에서는 안정적인 값을 도출함을 확인할 수 있었다. 실험 결과를 통하여 Flat TDR 시스템의 측정값이 기존의 전통적인 다짐관리방법과 유사한 값을 도출하는 것을 확인할 수 있었고 이는 빠른 시공성과 경제성을 필요로하는 건설현장에서 Flat TDR 장비가 적합하다는 것을 판단할 수 있었다.
PURPOSES : The objective of this study is to propose a quality control and quality assurance method for use during asphalt pavement construction using non-destructive methods, such as ground penetrating radar (GPR) and an infrared (IR) camera. METHODS : A 1.0 GHz air-coupled GPR system was used to measure the thickness and in situ density of asphalt concrete overlay during the placement and compaction of the asphalt layer in two test construction sections. The in situ density of the asphalt layer was estimated based on the dielectric constant of the asphalt concrete, which was measured as the ratio of the amplitude of the surface reflection of the asphalt mat to that of a metal plate. In addition, an IR camera was used to monitor the surface temperature of the asphalt mat to ensure its uniformity, for both conventional asphalt concrete and fiber-reinforced asphalt (FRA) concrete. RESULTS : From the GPR test, the measured in situ air void of the asphalt concrete overlay gradually decreased from 12.6% at placement to 8.1% after five roller passes for conventional asphalt concrete, and from 10.7% to 5.9% for the FRA concrete. The thickness of the asphalt concrete overlay was reduced from 7.0 cm to 6.0 cm for the conventional material, and from 9.2 cm to 6.4 cm for the FRA concrete. From the IR camera measurements, the temperature differences in the asphalt mat ranged from $10^{\circ}C$ to $30^{\circ}C$ in the two test sections. CONCLUSIONS : During asphalt concrete construction, GPR and IR tests can be applicable for monitoring the changes in in situ density, thickness, and temperature differences of the overlay, which are the most important factors for quality control. For easier and more reliable quality control of asphalt overlay construction, it is better to use the thickness measurement from the GPR.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.