• 항공우주시스템공학회지
• /
• 제14권5호
• /
• pp.42-48
• /
• 2020

본 논문은 2행정 피스톤 엔진 기반 발전기 및 배터리로 구성된 드론용 전기추진시스템 설계 과정에 대해 다룬다. 연구의 목적은 하이브리드 시스템의 높은 에너지 밀도를 이용하여 비행시간을 증가 시키고 화석연료 사용량을 줄임으로써 환경 변화에 대처함에 있다. 시스템은 6 kW의 출력을 생산할 수 있고, 엔진 RPM 제어를 통해 부하 요구에 맞는 출력 조절이 가능하다. 또한 배터리를 추가 장착함으로써 출력 보완재 역할 뿐만 아니라 비상시 제한된 시간 내 주 전력으로 사용할 수 있다. 또한 발전기를 엔진 크랭크축에 직접 연결함으로써 설계 복잡성을 줄여 동체 내 공간 활용성을 증대 시켰다.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.71-77
• /
• 2016

The dielectric barrier discharge (DBD) has low efficiency due to about 70% input power is consumed as thermal energy in the discharge space. However, because of the usage of DBD ozone generator is easier than other methods. The DBD ozone generator has been widely applied for high concentration ozone generation in the industrial application. But, the low-capacity compact DBD ozone generator is not applied so far. Therefore, the DBD ozone generator is necessary to improve ozone production efficiency and reduce the capacity. In this paper, the stainless steel pipe inner electrode was designed with hall type and screw type to improve the ozone production yield. The manufactured two inner electrodes were experimented with normal type for comparison of the discharge characteristics and the ozone generating characteristics. As the experimental results, the discharge current effective value of designed inner electrodes with hall type and screw type are higher than the normal type, due to unequal electric field is formed at the boundary. However, the difference of designed and original electrodes is less than 0.1mA that has no effect on the discharge characteristic. On the other hand, the screw type inner electrode increased higher than original model about 7 times when the flow rate of the oxygen source gas was increased from $0.6{\ell}/min$ to $1.0{\ell}/min$ The reason was assumed by the flow rate of the raw gas through the inner electrode was became fast that has a cooling effect. The designed hall type and screw type inner electrodes have shown good performances in ozone generation and ozone production that better than normal type in the same electrode surface area.

• 한국해양공학회지
• /
• 제32권2호
• /
• pp.95-105
• /
• 2018

An FLNG (floating liquefied natural gas) or LNG FPSO (floating production, storage and offloading) unit is a notable offshore unit with the increasing demand for LNG. The liquefaction process on an FLNG unit is the most important process because it determines the economic feasibility, but would be a hazard source because of the large quantity of hydrocarbons. While a high efficiency process such as C3MR has been preferred for onshore liquefaction processes, a relatively simple process such as the SMR (single mixed refrigerant) or DMR (dual mixed refrigerant) liquefaction process has been selected for offshore units because they require a more compact size, lighter weight, and higher safety due to their space limitation for facilities and long distance from shore. It is known that an SMR has the advantages of a simple configuration, small footprint, and lower risk. However, with an increased production rate, the inherent safety of SMR needs to be evaluated because of its small train capacity. In this study, the potential explosion risks of the SMR and DMR liquefaction processes were evaluated at the conceptual design stage. The results showed that an SMR has a lower overpressure than a DMR at the same frequency, only with a small production capacity of 0.9 MTPA. With increased capacity, the overpressure of the SMR was higher than that of the DMR. The increased number of trains increased the frequency in spite of the small amount of equipment per train. This showed that the inherent risk of an SMR is not always lower than that of a DMR, and an additional risk management strategy is recommended when an SMR is selected as the concept for an FLNG liquefaction process compared to the DMR liquefaction process.

• 천문학회보
• /
• 제40권2호
• /
• pp.36.3-37
• /
• 2015

4C39.25 (0923+392) is a distant radio loud AGN placed at redshift 0.695. The motivation of our work is peculiar properties 4C39.25. Firstly, it has a conspicuous distinction of jet direction between kilo-parsec scale observation made by VLA (Kollgaard et al. 1990) and the parsec scale observation by VLBA (Kellermann et al. 1998). This might indicate episodic-jet activity which recently turned on. This object currently shows two stationary compact parsec-scale components which are bright jet component on east and less luminous core on west. Also, it is known that there have been superluminal jet components which are flowing from the core toward east, and then merging with the bright jet component (Marscher et al. 1991, Alberdi et al. 2000, Lister et al. 2013). Although 4C39.25 seems to be a blazar-like source having broad emission lines (SDSS) and superluminal motion, its property that jet component is brighter than the core is different from ordinary blazars. Furthermore, it has young radio galaxy-like properties such as non-variation in total flux (Alberdi et al. 1997, 2000, MOJAVE database) and high frequency peak at spectral energy distribution (Orienti et al 2007). Such complex properties led us to make recent observations to reveal precise properties and new changes of the source. We used Korean VLBI Network (KVN) and VLBI Exploration of Radio Astronomy (VERA) Array (KaVA) which provide high-frequency (23GHz and 43GHz) and high spatial resolution (1.2mas and 0.6mas). Therefore, this system is suitable for morphological and physical research on parsec scale structure. We present results for several epochs observed during 2013 to 2014, mainly focusing on morphological changes of 4C39.25 using KaVA images.

• 한국수소및신에너지학회논문집
• /
• 제28권4호
• /
• pp.345-351
• /
• 2017

Single stage water-gas shift reaction has been carried out at a gas hourly space velocity of $150,494h^{-1}$ over $Cu-Ce_{0.8}Zr_{0.2}O_2$ catalysts prepared by a co-precipitation method. Cu loading was optimized to obtain highly active co-precipitated $Cu-Ce_{0.8}Zr_{0.2}O_2$ catalysts for single stage water-gas shift reaction. 80 wt.% $Cu-Ce_{0.8}Zr_{0.2}O_2$ exhibited the excellent catalytic performance as well as 100% $CO_2$ selectivity (CO conversion = 27% at $240^{\circ}C$ for 50 h). The high activity and stability of 80 wt.% $Cu-Ce_{0.8}Zr_{0.2}O_2$ are correlated to low activation energy and large amount of surface Cu atoms.

• 한국재료학회지
• /
• 제14권7호
• /
• pp.470-476
• /
• 2004

The fail safety filter is an assistant filter element to be mounted in order to intercept the particles leaked when the main filter elements are broken. So it should have two contrary functions of being plugged easily to meet the purpose of dust sealing and a high permeability to save the space. The permeability of the metal filter elements were effectively controlled by the following factor: powder size(53-840 ${\mu}m$) and applied pressure(1000-2000 $kgf/cm^2$), and then the compact were sintered for 1 hour at $1200^{\circ}C$ in vacuum sintering furnace. The sintered metal filters was evaluated for the function of the fail safety filter in an experimental unit. The maximum allowable particle size was 420-840 ${\mu}m$, when a CIP pressure of 1500 $kgf/cm^2$ was applied reveals a permeability of about $1.2{\times}10^{10}m^2$ and pore size of about 60 ${\mu}m$. The metal filter produced with stainless steel powder of 480-840 ${\mu}m$ size, which presented excellent permeability than commercial ceramic filter element and plugged with in 3 minutes with the leak of the maximum particle size less than 3 ${\mu}m$.

• Advances in Energy Research
• /
• 제4권4호
• /
• pp.299-323
• /
• 2016

Cylindrical parabolic solar concentrators of small concentration ratio are attractive options for working temperatures around $120^{\circ}C$. The heat gained can be utilized in many applications such as air conditioning, space heating, heating water and many others. These collectors can be easily manufactured and do not need to track the sun continuously. Using a heat pipe as a solar absorber makes the system more compact and easy to install. This study is devoted to modeling a system of cylindrical parabolic solar concentrators of small concentration ratio (around 5) fitted with a heat pipe absorber with a porous wick. The heat pipe is surrounded by evacuated glass tube to reduce thermal losses from the heat pipe. The liquid and vapor flow equations, energy equation, the internal and external boundary conditions were taken into consideration. The system of equations was solved and the numerical results were validated against available experimental and numerical results. The validated heat pipe model was inserted in an evacuated transparent glass tube as the absorber of the cylindrical parabolic collector. A calculation procedure was developed for the system, a computer program was developed and tested and numerical simulations were realized for the whole system. An experimental solar collector of small concentration, fitted with evacuated tube heat pipe absorber was constructed and instrumented. Experiments were realized with the concentrator axis along the E-W direction. Results of the instantaneous efficiency and heat gain were compared with numerical simulations realized under the same conditions and reasonably good agreement was found.

• 한국산학기술학회논문지
• /
• 제21권5호
• /
• pp.337-343
• /
• 2020

지난 수십 년간, 소형 로봇 가운데 동물과 곤충을 모방한 생체모방 로봇은 인간이 신체적으로 접근할 수 없는 영역에서 특별한 임무를 위해 개발되어 왔다. 최근 들어, 사람의 접근이 제한되는 공간(예 : 고농축 방사능 보관지역, 바이러스 지역, 대테러 위험지역 등)이 늘어나면서 로봇의 활용범위가 더욱 다양해지고 있으며, 과거에는 사람만 가능했던 많은 행위들이 소형 로봇으로의 대체가 시도 되고 있다. 그 중에서도 보행 로봇의 최적 움직임은 이동하는 표면의 특성(예: 거칠기, 곡률, 경사, 재료 등)에 의해 결정될 수 있다. 본 연구에서는 소형 보행 로봇에 적용하기 위한 구조가 간단하고 효율적으로 구동 가능한 압전세라믹 벤더 엑츄에이터를 제안하였다. 유한요소 해석법을 활용한 동적 모델링을 통해 구동원의 형상을 최적화하여 로봇의 이동 성능을 극대화 하였고, 제작과 실험을 통하여 그 결과를 검증하였다. 제작된 엑츄에이터는 무부하 조건에서 최대속도 236mm/s로 이동 하였고, 5g의 부하를 적재하고 156mm/s의 속도로 이동 가능함을 확인 하였다. 제안된 다족형 액추에이터는 수행해야 할 임무와 요구 성능에 따라 모듈식으로 추가가 가능한 장점이 있다.

• 한국항행학회논문지
• /
• 제17권2호
• /
• pp.171-176
• /
• 2013

본 논문에서는 IEEE 802.15.4 규격에서 제시하는 2.4 GHz 대역의 지그비 모듈용으로, 안테나의 크기를 줄이기 위하여 접지면의 모서리에서 절단되어진 마이크로스트립 급전 소형화된 폴디드 슬롯 안테나를 제안하였다. 제안된 안테나는 일반적인 지그비 모듈의 PCB크기인 $35mm{\times}35mm$ 내에서 가장자리의 $35mm{\times}9mm$로 제한된 공간 내에서 제작되었다. 측정된 임피던스 대역폭과 안테나 최대 이득은 각각 120 MHz (2.37~2.49 GHz), 2.4 dBi이고, 방사패턴은 일반적인 폴디드 슬롯 안테나와 유사하며 통과대역 내에서 일정한 경향을 보인다. 이와 같은 안테나의 특성과 단순한 구조는 지그비 모듈에 적용하기 적합한 안테나로 제공되는데 도움을 줄 것으로 기대된다.

• 전자공학회논문지SC
• /
• 제46권5호
• /
• pp.44-51
• /
• 2009

본 논문에서는 전력선 통신을 이용한 에어컨 피크 전력 제어 시스템을 개발하였다. 기존의 유선 RS-485통신 방식의 경우 별도의 통신 선로 설치가 필요하여 기존 건물에 설치하기 어려운 문제점과 무선 통신 방식의 경우 차폐된 공간에서는 설치가 용이하지 못한 문제점을 전력선 통신 방식을 채택하여 개선하였다. 기존에는 단상에만 적용된 것을 3상 4선식에도 적용할 수 있도록 개선하여 국내 모든 전기 환경에서 설치가 가능하도록 하였다. 전력선 통신을 이용한 타 시스템의 경우 전력선 모뎀을 별도로 부착하도록 되어 있으나 본 논문에서는 일체형으로 설계 구현하여 안정성 및 경제성을 높였다. 따라서 본 시스템의 가장 큰 장점인 설치의 용이성, 안전성과 경제성으로 인하여, 보다 확대 적용이 가능하여 에너지 절약이 절실히 필요한 현 시점에서 에어컨 피크 전력 관리 시스템의 활성화에 크게 기여 할 수 있을 것이다. 본 논문에서 구현된 시스템의 검증은 원격 에어컨 제어기 및 전력선 게이트웨이에 대한 설계 검증 시험과 전체 시스템의 필드 시험을 통해 성능 및 신뢰성의 우수함을 검증하였다.