• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.126-127
• /
• 2006

In this study, nano grain W is fabricated by Severe Plastic Deformation-Powder Metallurgy (SPD-PM) process. W powder and W-Re powder mixtures are processed by SPD-PM process, a Mechanical Milling (MM) process. As results, a nano grain structure, whose grain size is approximately 20nm, is obtained in W powder after MM for 360ks. A nano grain W compact, whose grain size 630nm, has excellent deformability above 1273K. A nano grain W-10Re compact is composed of equiaxed grain, a grain growth is restrained and has low dislocation density after the large deformation; therefore it is considered that W-Re compact shows superplasticity.

• 전기학회논문지P
• /
• 제64권3호
• /
• pp.121-124
• /
• 2015

In this paper, we developed the compact Doppler radar using the compact dual-circularly polarized antenna for medical application. The operating frequency is 2.47 GHz for considering ISM band. In order to decrease the size of the entire system, we designed the compact antenna and located the circuit board at the back of the antenna. The simulation of the proposed antenna was performed by the finite difference time domain (FDTD) method. The total volume of the proposed system is $65{\times}45{\times}6mm^3$ including the antenna. From the experiment, the developed bio-radar could be used to support the device for medical applications.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.179-182
• /
• 2010

This paper proposed a novel compact bandpass filter with folded half mode substrate integrated waveguide (FHMSIW) cavities using two-layer printed circuit board(PCB) process. The area of the FHMSIW filter is reduced by nearly 50 % and 75 % compared with half mode substrate integrated waveguide(HMSIW) filter and substrate integrated waveguide(SIW) filter, respectively. A four-pole Chebyshev FHMSIW bandpass filter at C-band has been designed, simulated and fabricated. Measured results are presented and found to agree with the full-wave simulated results by using Ansoft HFSS. The filter shows good performance and compact size.

• 한국통신학회논문지
• /
• 제36권7A호
• /
• pp.678-682
• /
• 2011

본 논문에서는 1~6GHz 대역에서 동작하는 소형 대수 주기 다이폴 배열 (LPDA: Log-periodic Dipole Array) 안테나에 관해 연구하였다. LPDA 안테나의 폭을 소형화하기 위해 역(inverted)-L 형태의 다이폴 소자를 사용하였고, 전체 길이를 줄이기 위해 각 다이폴 소자 간의 간격을 줄였다. 역-L 형태의 다이폴 소자의 top-loading 길이를 증가시킬수록 LPDA 안테나의 폭을 더 줄일 수 있으나, 대역폭과 이득은 상대적으로 감소함을 알 수 있었다. 최종 제작된 소형 LPDA 안테나는 FR4(비유전율 4.4, 두께 1.6 mm) 기판 상에 제작되었고, 표준 LPDA 안테나와 비교하여 폭이 32%, 길이가 49% 줄어들었다. 측정한 이득은 1~6GHz 대역에서 1~3.1 dBi 범위에 있다.

• ETRI Journal
• /
• 제36권2호
• /
• pp.286-292
• /
• 2014

This paper presents a compact structure composed of an upper high-impedance transmission line, a middle extended parallel coupled line, and a pair of inter-coupled symmetrical stepped impedance stubs. Detailed investigation into this structure based on an equivalent circuit analysis reveals that this proposed structure exhibits a quasi-elliptic low-pass filtering response with three transmission zeros. Moreover, the positions of the three transmission zeros can be tuned and reallocated flexibly by choosing the proper circuit parameters. Finally, the design concept is validated through the design, fabrication, and measurement of two exemplary low-pass filters (LPFs) with one single unit and two cascaded asymmetric units. The measured results agree well with the simulated results. In addition, in the range of $1.42f_c$ to $7.03f_c$, the fabricated quasi-elliptic LPFs experimentally demonstrate a very wide upper-stopband of 20 dB using a compact size of only $0.0089{\lambda}_g{^2}$, where ${\lambda}_g$ is the guided wavelength of a $50{\Omega}$ transmission line at the central frequency.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.343-350
• /
• 1997

To fabricate the ceramic/metal(SiC/ Al alloy) composite, SiC preform was prepared by Pressureless Powder Packing Forming Method and 6061 Al alloy was infiltrated into the preform. Uniform compact having an average pore size of 10 ${\mu}{\textrm}{m}$ and narrow pore size distribution was prepared. Phenolic resin solution(40 wt%) was penetrated into the SiC compact, and then the compact was preheated at the temperature of 120$0^{\circ}C$. The pore size distribution and the microstructure of the preform were not changed by preheating. An uniform microstructure without any crack in the preform was obtained in SiC-Al alloy composite. The infiltration of 6061. Al alloy into the preform began at the temperature of 130$0^{\circ}C$ and the amount of infiltration increased in proportion to the infiltration temperature and the soaking time. The increasement rate of the infiltration amount decreased after 3 h. As a result of the infiltration at 140$0^{\circ}C$ for 4 h, Al alloy was well distributed in the interparticle channels and the relative density of the composite was above 98%. The strength and the fracture toughness of the composite were 303 MPa and 21.65 MPam1/2, respectively.

• Journal of Communications and Networks
• /
• 제14권5호
• /
• pp.546-553
• /
• 2012

Compact routing intends to achieve good tradeoff between the routing path length and the memory overhead, and is recently considered as a main alternative to overcome the fundamental scaling problems of the Internet routing system. Plenty of studies have been conducted on compact routing, and quite a few universal compact routing schemes have been designed for arbitrary network topologies. However, it is generally believed that specialized compact routing schemes for peculiar network topologies can have better performance than universal ones. Studies on complex networks have uncovered that most real-world networks exhibit power-law degree distributions, i.e., a few nodes have very high degrees while many other nodes have low degrees. High-degree nodes play the crucial role of hubs in communication and inter-networking. Based on this fact, we propose two highest-degree landmark based compact routing schemes, namely HDLR and $HDLR^+$. Theoretical analysis on random power-law graphs shows that the two schemes can achieve better space-stretch trade-offs than previous compact routing schemes. Simulations conducted on random power-law graphs and real-world AS-level Internet graph validate the effectiveness of our schemes.

• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.109-114
• /
• 2016

본 논문은 디지털 무선 전송시 채널에서 발생되는 부호간 간섭과 잡음의 영향을 최소화하기 위한 CCA (Compact Constellation Algorithm) 등화 알고리즘에서 적응 스텝 크기를 적용하여 이의 등화 성능 개선에 관한 것이다. 일반적으로 등화 알고리즘에서 적응을 위한 스텝 크기는 고정적으로 사용하지만, 제안 알고리즘에서는 등화를 위한 스텝 크기를 비선형 함수인 오차 신호에 비례하도록 변화시킨다. 이의 개선된 등화 성능을 보이기 위하여 등화기 출력 성상도, 잔류 isi, 최대 찌그러짐과 MSE와 SER을 적용하였으며, 이들을 고정 스텝 크기를 갖는 기존 CCA와 비교하였다. 컴퓨터 시뮬레이션의 결과 정상 상태 이후에서는 적응 스텝 방식의 CCA가 고정 스텝 방식의 CCA보다 우월함을 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권2호
• /
• pp.72-78
• /
• 2001

A compact size high voltage pulse generator with nanosecond rise time has been designed and investigated experimentally. The inductance of a pulse generator can be reduced by fixing the Marx generator and pulse forming network components into a single cylindrical unit. As a result, nanosecond rise time about $8{\sim}10[ns]$ and pulse width of several hundred [ns] can be obtained from a modified Marx pulse generator. And parametric studies showed that the rise time of the output pulse was depended little on the change of the load resistance and the charging capacitance while, the pulse width of the output pulse was depended greatly upon the change of the load resistance and the charging capacitance. The theoretical showed the possibility to design the laboratory-size pulse generator very fast rising time and a proper pulse width by minimizing stray inductance and varying resistance and capacitance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.400-402
• /
• 1999

We have developed a new type Automatic Vending Machine(AVM) of a small size with simplification of coin mechanisms. The AVM adopts a new type transportation system named thin film-transportation system. Thin films have advantages of safe guide and transportation of various goods which made from various materials and shapes. The AVM has advantages of low price and simple mechanisms. The compact size($300{\times}330{\times}630$, mm)is realized by the use of simple coin mechanisms and thin-transportation system.