• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.674-683
• /
• 2014

Multi-hop wireless networks has become common phenomenon according to a development of wireless communications and an increase of usage of wireless link. ARQ is one of the common protocols in link layer and can improve a link performance recovering packet loss in wireless link. However, ARQ cannot sufficient to assure a end-to-end performance because ARQ only manages the ARQ's own link. In this paper, we propose a new retransmission persistence for ARQ in multi-hop wireless network to satisfy the end-to-end performance. The proposed scheme can aware a bottleneck link according to the exchange of link information between ARQs and can support the end-to-end performance by managing a retransmission persistence. OPNET simulator is used to evaluate the performance of the proposed scheme and results show that proposed scheme can improve the end-to-end performance with satisfying a requirement of entire wireless section.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.64-76
• /
• 2017

Routing in mobile ad hoc networks (MANETs) is highly challenging because of the dynamic nature of network topology. AntHocNet is a bio-inspired routing protocol for MANETs that mimics the foraging behavior of ants. However, unlike many other MANET routing protocols, the paths constructed in AntHocNet are unidirectional, which requires a separate path setup if a route in the reverse direction is also required. Because most communication sessions are bidirectional, this unidirectional path setup approach is often inefficient. Moreover, AntHocNet suffers from looping problems because of its property of multiple paths and stochastic data routing. In this paper, we propose a modified path setup procedure that constructs bidirectional paths. We also propose solutions to some of the looping problems in AntHocNet. Simulation results show that performance is significantly enhanced in terms of overhead, end-to-end delay, and delivery ratio when loops are prevented. Performance is further improved, in terms of overhead, when bidirectional paths setup is employed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.758-767
• /
• 2017

IoT paradigm which makes a information without direct intervention of a human and interworks with other objects, humans and systems is attracting attention. It will be expected the number of smart devices equipped with sensors and wireless communication capabilities is reached to about 260 billion by 2020. With the vast amount of sending data generated from rapidly increasing number of smart devices, it will bring up the traffic growth over internet and congestion in wireless networks. In this paper, we utilize the smart device as a sink node to collect and forward the sensing data periodically in IoT and propose a heuristic algorithm for a selection of sink nodes' set with each sink node satisfies the QoS its applications because a selection of optimal sink nodes' set is NP-hard problem. The complexity of proposed heuristic algorithm is $O(m^3)$ and faster than the optimal algorithm.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2344-2346
• /
• 2002

A vacuum control system has been developed for using Ethernet Multi Serial Device Severs (EMSDS) for the Pohang Accelerator Laboratory (PAL) storage ring. There are 124 vacuum ion pumps at the storage ring. It was a very important problem to solve the problem how to control such a big number of vacuum pumps distributed around the ring. After discussions, we decided to develop a serial to ethernet interrace device sever that will be mounted in the control system rack. It has a 32-bits microprocessor embedded Linux, 12 ports RS485 (or RS232) slave interface. one channel 10/100BaseTx ethernet host port, one channel UART host port, and 16 Mbytes large memory buffer. These vacuum pumps are connected to Ion-Pump serial controllers, which chop the AC current so as to control the current in the pumps. The EMSDS connect either 100BaseTx or 10BaseT ethernet networks to asynchronous serial ports for communication with serial device. It can simultaneously control up to 12 ion-pump serial controllers. 12 EMSDS are connected to a personal computer (PC) through the network. The PC can automatically control the EMSDS by sending a set of commands through the TCP/IP network. Upon receiving a command from a PC running under Windows2000 through the network, the EMSDS communicate through the stave serial interrace ports to ion-pump controller. We added some software components on the top of EPICS (Experimental Physics and Industrial Control System) toolkit.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.2
• /
• pp.78-83
• /
• 2019

Sounds based machine fault diagnosis recovers all the studies that aim to detect automatically abnormal sound on machines using the acoustic emission by these machines. Conventional methods that use mathematical models have been found inaccurate because of the complexity of the industry machinery systems and the obvious existence of nonlinear factors such as noises. Therefore, any fault diagnosis issue can be treated as a pattern recognition problem. We propose here an automatic fault diagnosis method of hand drills using discrete wavelet transform(DWT) and pattern recognition techniques such as artificial neural networks(ANN). We first conduct a filtering analysis based on DWT. The power spectral density(PSD) is performed on the wavelet subband except for the highest and lowest low frequency subband. The PSD of the wavelet coefficients are extracted as our features for classifier based on ANN the pattern recognition part. The results show that the proposed method can be effectively used not only to detect defects but also to various automatic diagnosis system based on sound.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.21-27
• /
• 2004

In an urban area telecommunication using wireless system, the accurate prediction and analysis of wave propagation characteristics are very important to determine the service area optimized selection of base station, and eel design, etc. In the stage of these analyses, we have to present the propagation prediction mood which is varied with the type of antenna, directional angle, and configuration of the ground in our urban area in addition we need to perform an analysis of the conventional mode which is similar to ours and dig out the parameters to evaluate the wave environment before the cell design for the selected area. In this paper, we propose a wave propagation prediction model concerning the topography and obstacles in our urban area. We extract the parameters and apply them to the proposed wave environment for the simulation analyzing the propagation characteristics. Throughout these analyzing procedure, we extracted the essential parameters such as the position of the base station, the height of topography, and adequate type and height of the antenna with our preferable cuteness.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.241-250
• /
• 2006

Regarding a spam attack and the interception that a spinoff is largest among weakness of VoIP service at these papers study. Write scenario of a spam attack regarding VoIP service, and execute Call spam, Instant Messaging spam, Presence spam attack. A spam attack is succeeded in laboratories, and prove, and confirm damage fact of a user in proposals of a spam interception way of VoIP service, 1) INVITE Request Flood Attack 2) Black/White list, 3) Traceback, 4) Black Hole-Sink Hole, 5) Content Filtering, 6) Consent based Communication, 7) Call act pattern investigation, 8) Reputation System Propose, and prove. Test each interception plan proposed in VoIP networks, and confirm security level of a spam interception. Information protection of VoIP service is enlarged at WiBro, BcN, and to realize Ubiquitous Security through result of research of this paper contribute, and may make.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.153-158
• /
• 2008

The technology of Software Defined Radio (SDR) is a possible solution to interwork flexibly between various wireless transport protocols. Ubiquitous network, like u-health service network, includes sensor devices or nodes which do not facilitate all the same transport protocols to access network. As such this may be in such unreachable situations as poverty of all required AP (Access Point)’s, faults or contention in a path of particular protocol communication, etc. This paper presents research results of modeling and simulation to analyze transport performance of multi-protocol ubiquitous network which includes SDR-based interwork nodes and congestion-controlled AP’s. Focusing mainly on dynamics of overall transport performance rather than protocol execution procedures, this paper employs the Zeigler’s DEVS (Discrete Event Systems Specification) methodology and DEVSim++simulation environment to experiment.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.225-232
• /
• 2014

Supply of a smart device has been made with the development of communication networks and growing desire of people to improve the quality of life, the service industry about it have been made with smart devices. Among them, there are various services that can help people change their behavior to healthy life. But it does not have a large impact on the behavior change of performer because its been developed as a general process. Therefore in this study examine development situation about current behavior change applications through application markets. Development current situation can be separated by process to two patterns. As a result we propose behavioral change model that includes integrated change model that one of the behavior theory model, accomplish the goal process of goal setting theory and habit formation phase for automate the changes. Also, we provide appropriate service according to the model that leads motivation, sustainability of the action and positive behavior change to performer. We can expect in many aspects such as ability and motivation than existing service.

• Management & Information Systems Review
• /
• v.34 no.3
• /
• pp.141-160
• /
• 2015

IoT(Internet of Things) has become a major issue as new type of convergence technology, expending existing of USNs(Ubiquitous Sensor Networks), NFC(Near Field Communication), and M2M(Machine to Machine). The IoT technology defines as a networking for things, which can establish intelligent links collaboratively for sensing networking and processing between each other without human intervention. The purpose of this study is to investigate to forecast the future distribution changes and orientation of contribution of distribution industry on IoT and to provide the implication of distribution changes. To become a global market leader, IoT requires much more development of core technology of IoT for distribution industry, new service creation and try to use a market-based demand side strategy to create markets. So, to become a global leader in distribution industry, this study results show that first of all establishment of standardization of IoT, privacy safeguards, security issues, stability and value were more important than others. The research findings suggest that the development goals of IoT should strive to boost the creation of a global leader in distribution industry and convenience to consider consumers' demands as the most important thing.