• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.8
• /
• pp.471-480
• /
• 2003

The design of a measurement system to perform Harmonic State Estimation (HSE) is a very complex problem. Among the reasons for its complexity are the system size, conflicting requirements of estimator accuracy, reliability in the presence of transducer noise and data communication failures, adaptability to change in the network topology and cost minimization. In particular, the number of harmonic instruments available is always limited. Therefore, a systematic procedure is needed to design the optimal placement of measurement points. This paper presents a new HSE algorithm which is based on an optimal placement of measurement points using Genetic Algorithms (GAs) which is widely used in areas such as: optimization of the objective function, learning of neural networks, tuning of fuzzy membership functions, machine learning, system identification and control. This HSE has been applied to the Simulation Test Power System for the validation of the new HSE algorithm. The study results have indicated an economical and effective method for optimal placement of measurement points using Genetic Algorithms (GAs) in the Harmonic State Estimation (HSE).

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.69-76
• /
• 2013

A lot of researches have been done to improve the energy efficiency of Wireless Sensor Networks. But all the current researches are based on the idea of direct communication between cluster head and sink node. Previous results assume that node can intelligently regulate signal energy according to the distance between nodes. It is difficult to implement algorithms based on this assumption. We present a multi-level routing algorithm from the sink node to all other nodes which have fixed radio wave radius. We also show the energy saving efficiency and the implementation in real WSN using the simulation result.

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.3-9
• /
• 2013

With the rapidly changing information communication environment and development of technologies, the informati on networks are evolved from traditional fixed form to an active variable network that flexible large variety of data can be transferred. To reflect the needs of users, the next generation using DWDM (Dense Wavelength Division M ultiplexing) transmission system and OXC (Optical Cross Connect) form a dynamic network. After that GMPLS (Ge neralized Multi-Protocol Label Switching) can be introduced to dynamically manage and control the Reconfigurable Optical Add-drop Multiplexer (ROADM)/Photonic Cross Connect (PXC) based network. This paper propose a softw are architecture of Path Computation Element (PCE) protocol that has proposed by Internet Engineering Task Force (IETF) to path computation. The functional blocks and Application Programming Interface (API) of the PCE protoco l implementation are also presented.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.471-479
• /
• 2015

Traditional designs of cognitive radio (CR) focus on maximizing system throughput. In this paper, we study the joint overlay and underlay power allocation problem for orthogonal frequency-division multiple access-based CR. Instead of maximizing system throughput, we aim to maximize system energy efficiency (EE), measured by a "bit per Joule" metric, while maintaining the minimal rate requirement of a given CR system, under the total power constraint of a secondary user and interference constraints of primary users. The formulated energy-efficient power allocation (EEPA) problem is nonconvex; to make it solvable, we first transform the original problem into a convex optimization problem via fractional programming, and then the Lagrange dual decomposition method is used to solve the equivalent convex optimization problem. Finally, an optimal EEPA allocation scheme is proposed. Numerical results show that the proposed method can achieve better EE performance.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.516-525
• /
• 2008

This paper proposes a compact, energy-efficient, and smart gas sensor platform technology for ubiquitous sensor network (USN) applications. The compact design of the platform is realized by employing silicon-on-insulator (SOI) technology. The sensing element is fully integrated with SOI CMOS circuits for signal processing and communication. Also, the micro-hotplate operates at high temperatures with extremely low power consumption, which is important for USN applications. ZnO nanowires are synthesized onto the micro-hotplate by a simple hydrothermal process and are patterned by a lift-off to form the gas sensor. The sensor was operated at $200^{\circ}C$ and showed a good response to 100 ppb $NO_2$ gas.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.952-961
• /
• 2016

In this paper, we study a spectrum sharing network (SSN) where a spectrum sharing device (SSD) coexists with multiple wireless communication systems (WCSs) in the same channel. The SSD can operate with either a duty cycle (DC) channel access mechanism or a listen-before-talk (LBT) channel access mechanism, whereas WCSs operate with an LBT mechanism. An opportunistic channel selection scheme for the SSD in the SSN is first proposed to minimize the outage probability. The optimal data transmission time for the DC-based SSD is derived to further improve the outage probability. We also derive the exact and closed-form outage probability of the proposed channel selection in the SSN by assuming that the number of WCSs operating in each channel is uniformly distributed. The simulation results show that the proposed channel selection scheme outperforms other channel selection schemes. It was also observed that a DC-based SSD with an optimal data transmission time provides a better outage performance than an LBT-based SSD. As the number of available channels increases, the channel selection scheme plays an important role in minimizing the outage probability of the SSNs.

• ETRI Journal
• /
• v.42 no.2
• /
• pp.163-174
• /
• 2020

Numerous wearable technology companies have recently developed several headmounted display (HMD) products for virtual reality (VR) services. 5G wireless networks aim at providing high-quality 3D multimedia services such as VR, augmented reality, and mixed reality. In this study, we examine the application of millimeter-wave (mmWave) technology to realize low-latency wireless communication between an HMD and its content server. However, the propagation characteristics of mmWave present several challenges such as the deafness, blockage, and beam alignment problems, and interference among content servers. In this study, we focus on an environment that provides VR services in the mmWave band and introduce existing techniques for addressing such challenges. In addition, we employ a commercialized IEEE 802.11ad VR dongle to measure the actual data rate of an mmWave VR application and identify the degree to which the performance deteriorates when the above problems occur. Finally, we verify the feasibility of the proposed solutions through a simulation of several VR scenarios in the mmWave band.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.79-87
• /
• 2010

It is widely accepted that the coverage with high user densities in mobile multimedia environments can only be achieved with small cell such as micro- and pico-cell. If handover events occur during the transmission of multimedia, the efficient resource reservation and handover methods are necessary in order to maintain the same QoS of transmitted multimedia traffic because the QoS may be defected by some delay and information loss. In this paper, we propose a resource allocation method in the next generation mobile communication systems, in which the resource allocation process has a tight relation with call admission, call load, and packet scheduling. The simulation results show that our proposed method provides a excellent performance.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.3
• /
• pp.456-462
• /
• 2007

Food safety has been a growing consumer concern over the last few decades, and remains a priority for consumers, the food industry, and regulatory agencies alike. Although consumer concern for food safety has increased, consumer confidence has decreased. The emphasis on food safety is related to that of preliminary risk management. The ability to collect and provide food risk information is a key element in enhancing the way food safety authorities protect consumers from risk. This review aims to investigate the current situations of international organizations, as well as several countries' systems for collecting and providing food risk information. Through the comparison and analysis of each system, this review proposes strategies to establish a systematic collecting of information and provision of infrastructure in Korea. To develop an information collection system suited to Korea's situation, it is necessary for Korea to strengthen interactions and cooperation with other trade partners through the enlargement of international networks. Such efforts on food risk communication should be made by providing high quality and clear information.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.1
• /
• pp.42-49
• /
• 2009

Most Vehicular Ad hoc Network (VANET) applications rely heavily on broadcast transmission of traffic related information to all reachable nodes within a certain geographical area. Among various broadcast approaches, flooding is the first broadcasting technique. Each node rebroadcasts the received message exactly once, which results in broadcast storm problems. Some mechanisms have been proposed to improve flooding in Mobile Ad hoc Networks (MANET), but they are not effective for VANET and only a few studies have addressed this issue. We propose two distance-based and timer-based broadcast suppression techniques: 15P(15percent) and slotted 15P. In the first (distance based) scheme, node's transmission range is divided into three ranges (80%,15%and5%). Only nodes within 15% range will rebroadcast received packet. Specific packet retransmission range (15%) is introduced to reduce the number of messages reforwarding nodes that will mitigate the broadcaststorm. In the second (timer-based) scheme, waiting time allocation for nodes within 15% range isused to significantly reduce the broadcaststorm. The proposed schemes are distributed and reliedon GPS information and do not requireany other prior knowledge about network topology. To analyze the performance of proposed schemes, statistics such as link load and the number of retransmitted nodes are presented. Our simulation results show that the proposed schemes can significantly reduce link load at high node densities up to 90 percent compared to a simple broadcast flooding technique.