• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.454-458
• /
• 2012

The CBTC(Communication based Train Control) and WPAN(Wireless Personal Area Network) systems employed on 2.4GHz ISM band wireless networks provide complementary service within the same environment. Coexistence between the networks will be impaired if the mutual packets are uncertainty associated the timing or gaussian distance. This paper analyzes the impact of the mutual interference and proposed method to minimize the effect of the WPAN system signals on CBTC system. The performance analysis is illustrated by examining the symbol error rate versus signal to noise interference ratio in terms of carrier frequency offset. The method contributes to reduce the symbol error rate drastically. However it can't be a fundamental solution for the impact on the interference problem. It may be needed for railway only frequency after checking the problems of the current railway frequency.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.189-194
• /
• 2020

Recently, various clustering techniques have been studied to efficiently handle data generated by heterogeneous IoT devices. However, existing clustering techniques are not suitable for mobile IoT devices because they focus on statically dividing networks. This paper proposes a probabilistic deep learning-based dynamic clustering model for collecting and analyzing information on IoT devices using edge networks. The proposed model establishes a subnet by applying the frequency of the attribute values collected probabilistically to deep learning. The established subnets are used to group information extracted from seeds into hierarchical structures and improve the speed and accuracy of dynamic clustering for IoT devices. The performance evaluation results showed that the proposed model had an average 13.8 percent improvement in data processing time compared to the existing model, and the server's overhead was 10.5 percent lower on average than the existing model. The accuracy of extracting IoT information from servers has improved by 8.7% on average from previous models.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.52-63
• /
• 1998

In this paper, several improvements to a copy network proposed previously for multicast packet switching are described. The improvements provide a solution to some problems inherent in multicasting. The input fairness problem caused by overf low is solved by a dynamic starting point decider(DSD), which can calculate running sums of copy requests starting from any input port. The starting point is changed adaptively in every time slot based on both the fill level of the input buffers in current time slot and the overflow situations of the previous time slot. Using the fill level of the conventional network. The DSD also provides the function of regulating overall copy requests according to the amount of input traffics. This is an essential function in improving overall throughputs of the copy networks. The throughput of a multicast switch can be improved substantially if partial service of copy request is implemented when overflow occurs. Call-splitting can also be implemented by the DSD in a straightforward manner. The hardware for the DSD is derived with the objective of simple architectures for the high speed operation. Simulation study of the copy network under various traffic conditions is presented to evaluate its performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2730-2736
• /
• 2010

Recently, various networks have been introduced in the car of the internal and external sides. These have been integrated by one HMI(Human Machine Interface) to control devices of each network and provide information service. The existing vehicle navigation system, providing GPS based vehicle positioning service, has been included to these integrated networks as a default option. The GPS has been used to the most universal device to provide position information by using satellites' signal. But It is impossible to provide the position information when the GPS can't receive the satellites' signal in the area of tunnel, urban canyon, or forest canopy. Thus, this paper propose and implement the method of measuring vehicle position by using the sensing data of internal CAN network and external Wi-Fi network of the integrated car navigation circumstances when the GPS doesn't work normally. The results obtained by implementation shows the proposed method works well by map matching.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2811-2817
• /
• 2010

In this paper we propose the QAC-MAC that supports Quality of Service(QoS) and saves energy resources of the sensor node, and hence prolonging the lifetime of the sensor network with multiple sink nodes. Generally, the nodes nearest to the sink node often experience heavy congestion since all data is forwarded toward the sink through those nodes. So this critically effects on the delay-constraint data traffics. QAC-MAC uses a hybrid mechanism that adapts scheduled scheme for medium access and scheduling and unscheduled scheme based on TDMA for no data collision transmission. Generally speaking, characteristics of the real-time traffic with higher priority tends to be bursty and has same destination. QAC-MAC adapts cross-layer concept to rearrange the data transmission order in each sensor node's queue, saves energy consumption by allowing few nodes in data transmission, and prolongs the network lifetime.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2593-2600
• /
• 2010

A growth of mobile and wireless networking technologies have enabled mobile ad hoc networks applicable to a wide range of areas. This paper analyzes dynamics of network transport performance with respect to dynamics of network states especially for the mobile ad hoc networks called MANET. The edge cost based modeling methodology is adopted for the analysis, which can express well the characteristics of MANET. In this methodology the network state at arbitrary time can be specified as one of four edge states. We extracts ten target network scenarios for the simulation analysis by employing not only the Real Edge/Infinity Edge concept but also interworking functionality between different transport protocols. Then we could acquire from simulation of them with the DEVSim++ engine that the more sorts of transport protocols and the more number of interworking nodes are included in the network, the more contribution is for improving network transport performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1447-1453
• /
• 2014

Wireless Body Area Networks (WBAN), standardized as IEEE 802.15.6, enable digital devices on/around the human body to communicate with one another. WBAN is essentially a person's piconet consisting of a master (mobile) device and several slave devices, which follows his/her mobility pattern, and hence, occasionally collides with another piconet as people meet or pass by. As such, a mechanism to detect collision and avoid interference is needed for intra-piconet communications. In this paper, we focus on this notorious problem of piconet collision and propose Distributed Time Division Piconet Coexistence (DTDPC) using local time offset exchange as a simple, attractive solution. The proposed DTDPC provides different level of services for various applications. Besides our simulation results have shown that the proposed solution outperforms the conventional CSMA protocols.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.493-495
• /
• 2016

In this paper, we propose an alternative method of collecting image data and changing nodes in wireless sensor networks based sensing disaster systems configured with zigbee using quad copter. It is difficult to observe a wide area caused by existing fixed video cameras in the wireless sensor network system using a conventional image-based. Also the nodes don't have provide to alternate methodology in situations when missing due to a disaster or destruction. In this paper, to use wearing the IP camera and the communication node to the quad copter, it provides a method to take advantage of as improving an alternative node of the reliability of the sensor node. The results show to improve the reliability of the sensor nodes and real-time status information through a video quad Copt than conventional systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.367-370
• /
• 2017

This paper proposes a method for selecting efficient relay nodes in stochastic DTN model. Delay Tolerant Network (DTN) uses the Carry and Forward method, which creates a bundle layer for efficient communication, selects relay nodes between different networks and heterogeneous networks, and forwards messages. DTN is basically composed of mobile nodes so DTN has no fixed routing route and it has long latency due to intermittent connection. Therefore, the nodes constituting the DTN necessarily have the characteristics to store the messages, and the capacity of the stored messages and nodes affects the performance of the network. Stochastic DTN model proposed a Markov model that changes randomly over time to analyze the performance of DTN. In this paper, we use stochastic message distribution and node contact probabilities using contact time analyzed through message generation and extinction in order to select efficient relay nodes in stochastic DTN model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2018

Recently, the convolutional neural network shows high performance in many computer vision tasks. However, convolutional neural networks require enormous amount of operation, so it is difficult to adopt them in the embedded environments. To solve this problem, many studies are performed on the ASIC or FPGA implementation, where an efficient representation method is required. The fixed-point representation is adequate for the ASIC or FPGA implementation but causes a performance degradation. This paper proposes a separate optimization of representations for the convolutional layers and the batch normalization layers. With the proposed method, the required bit width for the convolutional layers is reduced from 16 bits to 10 bits for the ResNet-50 neural network. Since the computation amount of the convolutional layers occupies the most of the entire computation, the bit width reduction in the convolutional layers enables the efficient implementation of the convolutional neural networks.