• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.16-18
• /
• 2009

VoIP(Voice over IP) is the technology to transport voice and video over IP networks such as Internet. Today, VoIP technology is viewed as the right choice for provide voice, video, and data communication over next generation network. We are sure that the multipoint VoIP will help enhancing the various application services in ubiquitous environment. The paper shows multipoint VoIP system implemented with end-point mixing model and introduces various embedded systems such as UFC(Ubiquitous Fashionable Computer), tourist guide terminal and industrial terminal which use the multipoint VoIP.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.178.2-178
• /
• 2001

Today, many electronic devices and ECUs (Electronic Control Units) are used in the automotive body control systems. It becomes more common that these devices exchange data with others through an in-vehicle network. Automobile manufacturers concentrate their efforts on development of body control systems based on networks in order to save cost and to increase flexibility and safety. OSEK/VDX has been founded as a joint project in German and French automotive industry aiming at an industry standard for an open-ended architecture for distributed control units in vehicles OSEK/VDX consists of Communication (specification of data exchange within and between control units), Network Management specification of Configuration determination and monitoring and Operating System (specification of realtime executive for ECU software ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.58-58
• /
• 2002

Recently Many technologies of the P.L.N (Power Line Network) are introduced for an efficient communication. P.L.N transmits information using power line channel. A medical information transmission system is proposed in this paper for the effective transmission. The Power Line Networks have an advantage in low cost because it uses existent power line. It can be easily applied anywhere that a power line socket is available. But the power line channel is very noisy, because many electronic devices in generate electronic noise in modulated signals. This problem should be considered carefully in the design of medical information transmission system using P.L.N. The proposed system can be applied...I propose a telemedicine system using the power line network.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.2
• /
• pp.215-221
• /
• 2003

The education system in this paper is used to demonstrate and educate the effects of electromagnetic induction. Placing an aluminum ring over the core and switching on AC source causes the ring to jump in the air due to induced currents in the ring producing a magnetic field opposed to that produced in the core. To control the position of the ring by only the current, it is to require nonlinear control algorithm and control board that is composed of photo sensors, decode circuit, computer communication, and power electronics circuit. This paper provides the development for education system in detail and the effects of dynamic neural networks for nonlinear control with on line is studied.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.864-867
• /
• 2002

Introduction of digital communication network such as Integrated Services Digital Networks(ISDN) and digital storage media have rapidly developed. Due to a large amount of image data, compression is the key techniques in still image and video using digital signal processing for transmitting and storing. Digital image compression provides solutions for various image applications that represent digital image requiring a large amount of data. in this paper, the proposed DWT(Discrete Wavelet Transform) filter bank is consisted of simple architecture, but it is efficiently designed that a user obtains a wanted compression rate as only input parameter. If it is implemented by FPGA chip, the designed encoder operates in 12MHz.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.5
• /
• pp.50-57
• /
• 1994

The analysis of the two-tone intermodulation distortion of multistage two-ports with gain and mismatching losses is presented with simplified two-port analyses and statistical viewpoint. The uncertainty obtained from unknown phase angles of the intermodulation distortion signals to the system designer is reduced using stochastic process, hence improving the accuracy of the solution. Based on the dc power dependance of third-order intercept point of each stage, the new efficient method for improving the total intercept point is also suggested with only the relation of dc power and available power gain criteria. Experimental verification on specific amplifiers used for cellular mobile communication comparing predicted and measured intercept points for various power conditions is presented.

• Electronics and Telecommunications Trends
• /
• v.27 no.2
• /
• pp.149-157
• /
• 2012

최근까지 정체 국면에 있던 3D 산업이 2012년부터는 런던 올림픽과 여수 EXPO 등 글로벌 이벤트 발생으로 관련 산업이 활성화될 것으로 전망되고 있다. BBC 등 글로벌 미디어들도 3D 방송을 본격화할 예정이어서 3D 콘텐츠 시장이 국내외적으로 급성장할 것으로 기대된다. 우리나라는 아직까지 3D 산업이 초기 시장이기 때문에 향후 3D 산업을 육성 발전시키기 위해서는 정부의 역할이 중요하다고 할 수 있다. 본고의 목적은 정부 주도로 연구개발을 수행하면서 3D 연구개발 분야에서 세계를 선도하고 있는 일본의 3D 연구개발 정책동향을 살펴보고, 우리나라에 주는 시사점을 발굴하는 것이다. 이러한 목적을 달성하기 위하여 본고에서는 'UNS(Universal Communications, New Generation Networks, Security and Safety for the Ubiquitous Network Society) 전략 프로그램 II'를 중심으로 일본의 3D 기술개발 관련 주요 전략을 살펴 보았으며, 3D 기술개발을 위한 R&D 조직인 NICT(National Institute of Information and Communication Technology) 및 URCF(Ultra-Realistic Communications Forum)의 역할을 소개하는 한편, 일본의 3차원 영상기술에 의한 초현장감 커뮤니케이션 기술개발의 현황과 전망을 고찰하였다.

• Electronics and Telecommunications Trends
• /
• v.35 no.4
• /
• pp.103-114
• /
• 2020

In this study, a machine learning (ML) algorithm is analyzed and summarized as a self-organizing network (SON) realization technology that can minimize expert intervention in the planning, configuration, and optimization of mobile communication networks. First, the basic concept of the ML algorithm in which areas of the SON of this algorithm are applied, is briefly summarized. In addition, the requirements and performance metrics for ML are summarized from the SON perspective, and the ML algorithm that has hitherto been applied to an SON achieves a performance in terms of the SON performance metrics.

• International Journal of Contents
• /
• v.7 no.3
• /
• pp.1-5
• /
• 2011

It has been an interesting challenge to find a good classifier for imbalanced data, since it is pervasive but a difficult problem to solve. However, classifiers developed with the assumption of well-balanced class distributions show poor classification performance for the imbalanced data. Among many approaches to the imbalanced data problems, the algorithmic level approach is attractive because it can be applied to the other approaches such as data level or ensemble approaches. Especially, the error back-propagation algorithm using the target node method, which can change the amount of weight-updating with regards to the target node of each class, attains good performances in the imbalanced data problems. In this paper, we analyze the relationship between two optimal outputs of neural network classifier trained with the target node method. Also, the optimal relationship is compared with those of the other error function methods such as mean-squared error and the n-th order extension of cross-entropy error. The analyses are verified through simulations on a thyroid data set.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.586-589
• /
• 2001

This paper focuses on a method to connect mobile devices such as mobile robot, Automated Guided Vehicle(AGV) to a fieldbus. In this paper, the IEEE 802.11 wireless LAN is used to extend a Profibus-DP network for the mobile devices. In order to integrate these two networks, a protocol converter is developed with two process(i.e., master process of Profibus-DP and virtual master process of IEEE 802.11) and an transmission buffer. Futhermore, a virtual polling algorithm is developed at the protocol conveter in order to satisfy real-time requirements on data communication.