• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.77-87
• /
• 2017

Even though current LTE/LTE-A mobile networks provide enough high data rate and low latency to support conventional wireless services, to support ultra-low delay services, such as virtual reality and remote control, in the next generation mobile communication network, it is required to provide very low delay about several ms. However, in the uplink transmission of the LTE/LTE-A system, the process of scheduling grant is required to obtain uplink resources for uplink transmission from the eNB. The process of granting uplink resources from eNB brings additional fixed latency, which is one of the critical obstacles to achieve low delay in uplink transmissions. Thus, in this paper, we propose a novel uplink transmission scheme called Cut-in uplink transmission, to reduce uplink latency. We provide the performance of the proposed uplink transmission scheme through simulations and show the proposed uplink transmission scheme provides lower uplink transmission delay than conventional uplink transmission scheme in LTE/LTE-A mobile networks.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.83-92
• /
• 2020

In this paper, we propose an efficient session management scheme for low-latency communications in 5G systems. The main idea of the proposed scheme is to prevent unnecessary reattempt signalling overhead when the session establishment for low-latency communications fails. Also, this method avoids network resource waste and battery drain of mobile devices. If a UE(User Equipment) fails to establish an Always-on PDU session for low-latency communications with the 5G systems because of network failure or resource unavailability, the proposed method prevents the UE's re-establishment of the Always-on PDU session by the specific information in the NAS(Non-Stratum) message from the 5G systems. Through simulation, we show that the proposed efficient session management scheme (ESMS) minimizes unnecessary signalling overhead and improves battery efficiency of mobile devices compared to existing legacy mechanism in 5G systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.277-284
• /
• 2009

With significant development in wireless communication technologies, the needs to handover from one network to another have grown dramatically. Recently IETF developed MIPv6 and FMIPv6 which are used to handover between different access networks. These handover mechanisms have some known weaknesses. MIPv6 can not serve time-critical application because it causes long handover latency and packet loss. By these reasons, MIPv6 does not guarantee session continuity. FMIPv6 uses handover preparation phase to reduce DAD latency. However FMIPv66 still suffers from long handover latency, because it must perform binding update at the end of handover procedure. In this paper we propose new handover mechanism FMIPv6-PBU which eliminates binding update latency. The proposed mechanism has compatability with lagacy FMIPv6. In this paper propose FMIPv6-PBU handover procedure and explain its procedures and evaluate it with MIPv6 and FMIPv6.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.113-118
• /
• 2005

Softswitch is the core BcN equipment which voice and multimedia switching based on the IP Technologies. It is designed to replace the Class 5(local Exchange) and Class 4(Toll Exchange) switch based on the circuit wired and wireless switching network technologies. Softswitch gets its name because typically it is a software based solution implemented on general purpose computers/servers. While the traditional PSTN switches are rely on dedicated facilities for T and S inter-connection and are designed primarily for voice communications. Packet based Softswitch is divided the control of call and bearer, very different from Public telephone network. Sometimes Call Agent or Media Gateway Controller, a key component in the VoIP solution, is also called Softswitch. This paper will suggest the software architecture of softswitch for performance in call processing part, also suggest the session management model to cover call setup latency.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.168-175
• /
• 2011

Contouring accuracy of CNC machine tools is very important for high-speed and high-precision machining. In particular, large contour error may occur during corner tracking. In order to reduce the corner contouring error, acceleration and deceleration control or tool-path planning methods have been suggested. However, they do not directly control the corner contouring error. In the meantime, network servo systems are widely used because of their easiness of building and cost effectiveness. Communication latency between the master controller and servo drives, however, may deteriorate contouring accuracy especially during corner tracking. This paper proposes a control strategy that can accurately calculate and directly control the corner contouring error. A prediction control is combined with the above control to cope with communication latency. The proposed control method is evaluated through computer simulation and experiments. The results show its validity and usefulness.

• Electronics and Telecommunications Trends
• /
• v.33 no.5
• /
• pp.51-63
• /
• 2018

Mobile cellular technology is evolving to accommodate a variety of vertical services, expanding the application from human-to-human communication to the Internet of Things(IoT). In particular, the fourth industrial revolution, bringing in a new vision in future smart factory, necessitates a new paradigm shift in wireless communication. Low latency and high reliability is a key issue in wireless applications for industrial IoT such as factory automation. In this paper, we review the recent progress in 5G URLLC (Ultra-Reliable Low Latency Communication) and discuss use cases, requirements, challenging technical issues, and potential solutions to support wireless factory automation such as discrete automation and process automation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1113-1116
• /
• 2020

In the EH-WSN(Energy Harvesting Wireless Sensor Network), the routing protocol must consider the power condition of nodes such as residual power and energy harvesting rate. Many EH-WSN studies have emphasized the power aspect and make the urgency of sensed data less important. However, in applications such as environmental monitoring, stability and latency become more important issues than power efficiency for urgent data. In this paper, we designed a routing protocol that can set path according to data urgency. To this end, relay nodes are determined considering the urgency of date. Nodes with poor power do not participate in routing when normal data is generated, so that urgent data can be transmitted reliably with low latency. The performance of the proposed routing protocol is analyzed by computer simulation.

• Electronics and Telecommunications Trends
• /
• v.36 no.6
• /
• pp.13-24
• /
• 2021

Industrial networks has been developing various technologies from fieldbus technology to industrial Ethernet and time-sensitive networking. The industry expects that the 5G mobile network will solve the diverse and highly specific industrial site requirements. Accordingly, 3GPP has been developing standard functions to provide ultra-high reliability, ultra-high speed, ultra-connection, and ultra-low latency services, and 3GPP Rel-16 began developing ultra-low latency and ultra-high reliability communication functions for 5G mobile networks to support vertical industries. In this paper, we show the related standardization trends and requirements to apply industrial IoT service scenarios to 5G mobile networks, and in particular, we introduce 5G system features and extended 5G system architecture to provide time sensitive communication and time synchronization services.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.49-58
• /
• 2016

In designing heterogeneous architecture based application-specific network-on-chips (NoCs), the opportunities of performance improvement would be expanded when applying asynchronous on-chip communication protocol. This is because the wire latency can be configured independently considering the wirelength of each link. In this paper, we develop the delay model of link-wire-length in asynchronous NoC and propose simulated annealing (SA) based floorplan-aware topology generation algorithm to optimize link-wirelengths. Incorporating the generated topology and the associated latency values across all links, we evaluate the performance using the floorplan-annotated sdf (standard delay format) file and RTL-synthesized gate-level netlist. Compared to TopGen, one of general topology generation algorithms, the experimental results show the reduction in latency by 13.7% and in execution time by 11.8% in average with regards to four applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5C
• /
• pp.361-370
• /
• 2008

NoC is adopted for data communication between processors and IPs in MPSoC system. NoC has an advantage of scalability in that system can be easily expanded just by adding switches. However, as the number of switches increases, chip area increases as well as data transfer latency. This paper proposes an architecture that can reduce the number of switches in the system by sharing network interfaces. To reduce NI area, the modules sharing network interface use a common buffer in network interface. Experimental results show that the chip area has been reduced by 46.5% and data transfer latency by 17.1%, respectively, compared to conventional architecture.