• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.135-142
• /
• 2012

DSRC system is a communication system that consists of road side equipment and on board equipment to provide services of communication technology for intelligent transportation systems. In this paper, we carry out a short-range dedicated high-speed wireless communications via DSRC system based on board equipment that is installed in the vehicle and road side equipment through wireless channels of communication. on board equipment is system that have a memory which initialization information is stored, it loads physical layer and MAC layer, LLC layer, L7 layer in turn. In the upper, it should analyze the various commands that are sent from roadside base stations, and carry out the operation which is in accordance with the command. and also it designs the structure of protocol stack which is TRM Layer loaded that is to initialize on L7 layer and MAC layer and efficiently designs operation between on board equipment and the road side equipment.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.40-45
• /
• 2019

The smart factory has developed with the help of several technologies such as automation, artificial intelligence, big data, smart sensors and communication protocols. The Internet of things(IOT) among communication protocols has become the key factor for the seamless integration of various manufacturing equipment. Therefore, it is important that the IOT cooperate with the standards of communication protocols proposed by the SEMI in the semiconductor industry. In this paper, we suggest a novel reference model of the communication protocols for semiconductor equipment by introducing an IOT service layer. With the IOT service layer, we can use the functions and the additional services provided by the IOT standards that give the inter-operability between factory machines and host computers. We implement the standard of the communication protocols for semiconductor equipment with the IOT service layer by using ns3 simulator. It concludes that it is necessary to provide the platform for the IOT service layer to deploy efficiently the proposed reference model of the communication protocols.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.228-234
• /
• 2014

In the case of construction equipment, internal wiring has a very complicated structure such as an electrical wiring and hydraulic equipments. Because of these complex wiring, a lot of time is spent on maintenance and equipment manufacturing. In this paper, we design and implementation of the high-reliability PLC(Power Line Communication) -CAN(Controller Area Network) communication module to reduce electrical wiring of the construction equipment.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3104-3110
• /
• 2011

This paper describes how to ensure safety of train by guaranteeing stable and continuous communication in RF-CBTC. CBTC System uses the wireless communication between onboard and wayside so that safety of wireless communication is the most important. Losing the position of train causes vital problem of train service. By losing the position of train, the other trains are blocked in the block and the train move by emergency mode so headway and safety cannot guaranteed. Therefore, safety is ensured by redundancy of wireless equipment. One of the ways to make redundancy is redundancy of equipment. However, the redundancy of equipment spends a lot of money to avoid interference in limited place like underground. Continuous communication is guaranteed by means of redundancy of wireless communication coverage to solve the problems even though one of the equipment is broken.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.87-92
• /
• 2018

One of the problems with the base station equipment is that there is a large difference between the replacement time of the hardware equipment such as the base station equipment and the radio access equipment, and the evolution period of the communication standard. Therefore, the base station communication platform must be flexible enough to handle the evolving communication standards after purchase. Recent research on reconfigurable communications platforms has focused on the efficient architecture of the communications platform to meet these requirements through software downloads while still using existing hardware. This paper presents a prototype of a base station communications platform based on the ETSI standard reconfigurable architecture. The communication platform presented in this paper is implemented as an ETSI standard reconfigurable architecture using a general-purpose DSP (Digital Signal Processor). In the implemented prototype, we verify the real-time feasibility of communication protocol updates through software reconfiguration.

• Journal of Information Processing Systems
• /
• v.18 no.6
• /
• pp.822-829
• /
• 2022

According to existing study into the remote fault diagnosis procedure, the current diagnostic approach has an imperfect decision model, which only supports communication in a close distance. An Internet of Things (IoT)-based remote fault diagnostic approach for wind power equipment is created to address this issue and expand the communication distance of fault diagnosis. Specifically, a decision model for active power coordination is built with the mechanical energy storage of power generation equipment with a remote diagnosis mode set by decision tree algorithms. These models help calculate the failure frequency of bearings in power generation equipment, summarize the characteristics of failure types and detect the operation status of wind power equipment through IoT. In addition, they can also generate the point inspection data and evaluate the equipment status. The findings demonstrate that the average communication distances of the designed remote diagnosis method and the other two remote diagnosis methods are 587.46 m, 435.61 m, and 454.32 m, respectively, indicating its application value.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.321-326
• /
• 2021

Wireless communication is a core technology constituting the Internet of Things (IoT), but there is no suitable educational equipment to learn various wireless communication technologies used in the Internet of Things through practice. This paper deals with the development of advanced education and training equipment that can perform various IoT wireless communication practices. It uses an Arduino mega board as a device to control various sensors. As wireless network technologies to send and receive the sensing date wirelessly, it makes use of RFID/NFC and Bluetooth among WPAN technologies, WiFi among WLAN technologies and LoRa and 2.4GHz wireless transceiver among WWAN technologies. In addition, GPS, infrared communication, I2C communication, and SPI communication are organized so that various IoT wireless communication technologies can be learned through practice. In addition, since the educational equipment developed in this paper is equipped with two devices, it is designed to perform transmission and reception experiments for wireless network technology within the equipment.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.275-281
• /
• 2005

In this paper, a new algorithm is proposed for high speed roaming in an Intelligent Train Control System(ITCS) and study on optimized positioning of radio communication equipment. A DCS(Data Communication System) which is a main part of CBTC(Communication Based Train Control) system, is consisted of radio based wireless communication system and wired optical system. In the radio based wireless communication, the position of AP enclosures and antennas shall be optimized for the guaranteed communication channel between wayside and trains both in open aired and tunnelled area. Also a communication channel established between wayside and train shall be maintained while train moves at its maximum speed. This study shows the way of determining the optimal position for the railway side communication equipment in Bundang Line and how to achieve continuous communicating channel for tracking and controlling train.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2052-2060
• /
• 2017

The SOLAS ship should carry at least 83 different types of equipment based on the SFI group codes and each of which consists of several to dozens of components. During ship operation, it is necessary to ensure the normal operation of such equipment, and remote maintenance is highly demanded for immediate repair in the event of a equipment fault. This study proposes to find suitable classification system and to derive database structure for remote maintenance of navigation and communication equipment. As a result of this study, the classification system of equipment should be layered into equipment type, model, and component, and main table in the database consists of FMEA, service history, case data through Q&A, Preventive Maintenance. A database was constructed for 140 navigation and communication equipment models and 750 components. In order to evaluate the practical effects, service engineer evaluated the usefulness using the cloud app.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.41-44
• /
• 2003

We propose portable equipment that monitors current and voltage of high-potential power transmission lines. In the equipment, a current and voltage sensor are attached to an insulator that supports a power transmission line: A clamped to the power line and the detected current signal is transmitted to the ground station by a wireless optical link using transmission line is detected by a high resistance element, zinc oxide (ZnO). That acts as a potential divider between the power line and ground. We make an experimental device for 66kV power line and demonstrate that it can monitor currents proposed equipment is small-sized, light, and inexpensive in comparison with the conventional CT (current transformer) and PT (potential transformer) since it does not require high potential insulators and magnetic cores, further, the equipment is easily installed owing to its small size and its simple structure.