• Title/Summary/Keyword: communication cable

Search Result 439, Processing Time 0.034 seconds

The Design of Ku-Band Cavity BPF (Ku-Band Cavity BPF설계)

  • Jeon, Hyung-Joon;Kang, Chang-Soo
    • Journal of the Institute of Electronics Engineers of Korea TE
    • /
    • v.42 no.4
    • /
    • pp.69-76
    • /
    • 2005
  • In this paper, a 2 stage 6-pole bandpass filter(BPF) is designed and implemented by using triple-mode cavity for satellite payload system. The BPF has a 100MHz bandwidth at the center frequency of 14.5GHz(Ku-band) and the response of the filter is the Chebyshev function. The cavity filter uses two orthogonal $TM_{113}$ modes and one $TM_{012}$ mode. The coupling between the adjacent cavityes(intercavity coupling) results in a Chebyshev response and is accomplished by only H-filed component of If modes. The size and location of intercavity slot is determined by the coupling equation from E-and H-field of TE and TM resonant modes in circular cavity. The 2-stage 6-pole triple-mode cavity BPF has the insertion loss of 2.4dB and the reflection loss of 15dB in the passband. The triple-mode BPF proposed in this thesis can be used as channel filters for satellite payload system and can minimize filter assembly in general wireless communication system.

A Design of Temperature-Compensating Ethernet Equalizer for Reliable Automotive Sensor Communication (차량 내 신뢰성 있는 센서 (Sensor) 통신을 위한 온도보상 기반 이더넷 이퀄라이저 (Ethernet equalizer) 설계)

  • Seo, Seoktae;Bien, Franklin
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.54 no.7
    • /
    • pp.61-70
    • /
    • 2017
  • In this paper, an Ethernet equalizer that compensates for automotive temperature variations within a broad range is presented. Communications in automotive systems have become increasingly important because of the many electronics in vehicles. Ethernet protocols are a good candidate for automotive communications. However, they should satisfy the AEC-Q100 requirements that stipulate an operational temperature range from -40 to $150^{\circ}C$. This paper proposes an Ethernet equalizer that can recover data up until 100 m length of CAT-5 cable adaptively within a temperature range of -40 to $150^{\circ}C$. To support the wide temperature range, a feedback system is used. The proposed equalizer has a bandwidth of 31.25 MHz with a fully-differential structure and is implemented in a Hynix $0.13{\mu}m$ BCDMOS technology.

An Analysis of A Circularly Polarized Conformal Microstrip Parch Antenna Using The Unsplit Anisotropic Perfectly Matched Layer(UAPML) (비분리형 비등방성 완전 정합층(UAPML)을 이용한 원형편파 등각 마이크로스트립 패치 안테나의 해석)

  • 박동희;김정기
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.9 no.6
    • /
    • pp.813-823
    • /
    • 1998
  • This paper analyzed the circularly polarized conformal microstrip patch antennal using the unsplit anisotropic perfectly matched layer(UAPML) method. Also, this paper are treated effectively the edge and corner parts on the 3 dimensional UAPML. Especially, to analyze microstrip patch antennas with the coaxial feeder line, it was applied to mixed the UAPML with Mur's first order absorbing boundary condition. Therefore this paper suggest the new the method to mix the UAPML with Mur's first order absorbing boundary condition. The results show the time responses of electromagnetics $E_z$ and $H\chi'$, input impedances of coaxial cable and radiation patterns of strip parchs on the single and the array patchs with central frequencies 1.575 GHz, 1.778 GHz and 4.8 GHz in L-band and C-band for mobile communication. The results of this paper shows that its results was compared the Mur's first order abc and mixed the second order dispersion boundary condition(SDBC) with the Mur's first order absorbing boundary condition. In accordance with, the validity of the method is confirmed.

  • PDF

Effective Installation Methods of Down Conductors in Lightning Protection Systems (뇌보호시스템에서 인하도선의 효과적인 설치기법)

  • 이복희;엄주홍;이승칠;강성만
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.16 no.4
    • /
    • pp.8-14
    • /
    • 2002
  • A modern lightning protection system is required to eliminate the risks such as electrical shocks and damages of structures, electrical and electronic equipments due to lightning. However, the conventional lightning protection systems play and important role in protecting persons and structures only. Thus an effective lightning protection system is indispensable today in computer, information and communication facilities and etc. The mafor objective of this paper is to develop the technology to protect electronics and computerized facilities against lightning-caused overvoltages. The study is oriented on the control of the potential rise of down conductors with the type and installation method of down conductors. As a result, to reduce side flashes and hazards caused by the potential rise of down conductor due to lightning current, the coaxial cable with a low characteristic impedance and high insulation level is suitable for a down conductor. In particular it is extremely effective to bond down conductors to the steel supporter, metal raceways and steel frame of structures.

Internet Revolution in Bangladesh

  • Rahman, Mizanoor
    • Proceedings of the CALSEC Conference
    • /
    • 2004.02a
    • /
    • pp.65-72
    • /
    • 2004
  • The Internet is a social and economic foundation, apparently destined for human communication and interaction. It is supposed to allow for more interactive and innovative ways for people to do what they do in 'real lift'. There is no shilly-shallying to say that at present, Internet has become a commanding and useful tool for empowerment and income making in developing countries. It is very difficult to say that at present internet has turned into a popular and useful thing among the Bangladeshi people like students, doctors, engineers, businessmen, researchers as well as politician who are being logged into the internet for getting information what they want. Though the Internet was invented in 1970 but it came late in Bangladesh through UUCPs (Unix-to-Unix copy) email connectivity in 1993 and IP connectivity in 1996. Having launched Internet, on June 1996 National polls result were broadcast through the using of World Wide Web (WWW) that was the first ever practice trial in Bangladesh. On June 1996, the government has approved to allow VSAT (Very Small Aperture Terminal) in the country's private sector to operate as Internet Service Provider (ISPs). At the end of year, there were only two ISPs in the country and number of users near about one thousand only. But next year in 1997, the total number of ISPs was more than a dozen and the clientele growth was ten times higher than that of the previous year. From then, the number of Internet users and ISPs are increasing significantly in Bangladesh. About 40 ISP are providing internet service among as many as 3, 20,000 users at present out of almost 130 license holder ISP provider but among the ISPs, most of the ISPs are placed in Dhaka and few are working in Comilla, Sylhet, Rajshahi, Chittagong and Khulna. It should be mention that currently, broadband internet (Radio, Cable) connection is working side by side dial -up connection where broadband accounts 10,000. This paper will have a comprehensive discussion on the current situations of Internet and some of the contemporary issues in the matter concerned.

  • PDF

Development of a Rich Media Framework for Hybrid IPTV (하이브리드 IPTV를 위한 리치 미디어 프레임워크 개발)

  • Sung, Min-Young
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.16 no.6
    • /
    • pp.631-636
    • /
    • 2010
  • With the growing trends of communication- broadcasting convergence, a hybrid IPTV that supports both IP network-based on-demand media and terrestrial or cable-based broadcast media is gaining attraction. This paper proposes a rich media framework for hybrid IPTV with support of the latest H.264 codec. For this purpose, we design and implement a media component and a RIA run-time engine customized for TV with the hybrid media. The media component has been designed to provide a uniform and efficient application interface to the various playback methods for RF broadcast and IP-based stored or live media. For performance and portability, it exploits media stream abstraction, adaptive on-demand I-frame search, and automatic calculation of play duration. Based on the proposed media interface, we develop a RIA run-time prototype. It has been carefully designed to fully utilize the built-in graphic acceleration hardware for optimized rendering in the resource-constrained IPTV environments. Demonstration and experiment results validate the performance and usefulness of the developed framework. The framework is expected to be used effectively to support graphics and hybrid media in the applications of IPTV-based VOD, advertisement, and education.

Extension Strategy for Terrestrial DTV-Internet Hybrid Services Standard (지상파 DTV-인터넷 하이브리드 서비스 표준 확장 전략)

  • Kim, Yunh-Young;Choi, Dae-Hoon;Park, Sung-Choon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.12B
    • /
    • pp.1522-1536
    • /
    • 2011
  • Due to the advance of broadband communication networks including the Internet, the release of diverse media, and the busy life cycle of modern people, it became difficult to watch TV programs strictly according to the program schedule. Instead, demand to download and watch the programs at any time on TV is increasing. In order to meet the demand, terrestrial DTV broadcasters developed a TV service which provides various on-demand contents by integrating terrestrial DTV network and the Internet without enforcing viewers to subscribe broadcasting services such as IPTV or CableTV, and standardized it as OHTV(Open Hybrid TV). In this paper, we explain the current status of OHTV standard and worldwide hybrid TV services and their technical standards. We also provide a strategy for the next version of OHTV standard in order to enhance the value of OHTV.

The evaluation on the impact of introduction of 8VSB transmission method on the broadcast market -Focusing on the in-depth interviews with experts- (8VSB 도입이 방송시장에 미치는 영향에 대한 평가 -전문가 심층 인터뷰를 중심으로-)

  • Kim, HeeKyung;Kim, DugMo
    • Journal of Digital Convergence
    • /
    • v.12 no.5
    • /
    • pp.501-515
    • /
    • 2014
  • The enforcement of the digital switch been two years, but more than half of the viewers are still not enjoying the benefits of it. Therefore, the government proposed that 8VSB transmission method so that majority of the viewer is able to enjoy the benefits of a digital switch. However, the claim has been suggested that 8VSB transmission method will have negative impacts on broadcast market feedback. In this regard, this study verified the effect of 8VSB and the method of minimization on the broadcast market. This study has conducted in-depth interviews concerned experts to achieve this purpose. Results of an interview revealed that the negative impact on the market of content and platforms, network is very small. In other words, the majority of the experts argued that the policy of government about 8VSB transmission are inadequate and it is improved to broaden the choice of the broadcast consumer.

BUC Design and Fabrication for Flyaway Satellite Terminal (운반형 위성단말 고출력 상향 주파수변환기 설계 및 제작)

  • Kim, Joo-Yeon;Shin, Kwan-Ho
    • Journal of IKEEE
    • /
    • v.24 no.1
    • /
    • pp.72-80
    • /
    • 2020
  • This paper describes the design and fabrication of a BUC(Block Up-converter) which is a component of a FST (Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. BUC is physically composed of an up-converter module, a high power amplifier module, a receive band suppression filter, a housing, and a cable assembly. It was designed using simulator AWR to satisfy the electrical characteristics of BUC's such as maximum output power, gain, unwanted signal, and intermodulation. The maximum output power and gain characteristics were measured at 43.4dBm and 51.8dB, respectively. The unwanted wave and intermodulation characteristics were -73.5dBc and -31.9dBc, respectively. Of the electrical requirements of Table 1, not only the above four but also all of the items were confirmed to be satisfied.

LNB Design and Fabrication for Flyaway Satellite Terminal (운반형 위성단말 저잡음 하향 주파수변환기 설계 및 제작)

  • Kim, Joo-Yeon;Shin, Kwan-Ho
    • Journal of IKEEE
    • /
    • v.24 no.1
    • /
    • pp.81-89
    • /
    • 2020
  • This paper describes the design and fabrication of a LNB(Low Noise Block downd-converter) which is a component of a FST(Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. LNB is physically composed of an down-converter module, a low noise amplifier module, a transmit band suppression filter, a isolator, a housing, and a cable assembly. It was designed using simulator (AWR) to satisfy the electrical characteristics of LNB's such as gain, noise figure and unwanted signal. The gain and noise figure characteristics were measured at 61.4dBm and 1.37dB, respectively. The unwanted wave was measured at -66.79dBc. Of the electrical requirements of Table 1, not only the above three but also all other items were confirmed to be satisfied.