• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.301-302
• /
• 2015

케이블 방송망에서 멀티-Gbps(Giga bit per second) 초고속 인터넷 서비스 제공을 위해 최근 북미에서 DOCSIS 3.1(Data over Cable Service Interface Specifications Version 3.1) 표준을 발표하였다. DOCSIS 3.1 은 최대 10Gbps 하향 데이터 전송과 최대 2Gbps 의 상향 데이터 전송을 목표로 한다. DOCSIS 3.1 이 이전 DOCSIS 표준들과 다른 점은 전송 효율을 높이기 위해 물리계층 전송 방식에 큰 변화를 주었다는 점이다. 기존 6MHz 대역폭의 단일 반송파 전송 방식에서 최대 192MHz 광역 채널의 다중 반송파 전송 방식으로 변경하였다. 또한 채널 오류정정 방식으로 BCH(Bose, Chaudhuri, and Hocquenghem)와 LDPC(Low Density Parity Check) 연접부호를 적용하여, 이로 인한 SNR 성능 이득 통해 4096-QAM 의 고차 변조를 지원한다. 본 논문에서는 최대 192MHz 의 광역 채널로 전송되는 약 2Gbps 의 전송 데이터에 대한 채널 오류 정정을 위해 고속의 LDPC 복호기 구현 방법을 제시한다.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.859-868
• /
• 2012

A new fault location algorithm based on stationary wavelet transform and its verification experiment results are described for HVDC submarine cables in this paper. For wavelet based fault location algorithm, firstly, 4th level approximation coefficients decomposed by wavelet transform function are superimposed by correlation, then the distance to the fault point is calculated by time delay between the first incident signal and the second reflected signal. For the verification of this algorithm, the real experiments based on various fault conditions and return types of fault current are performed at HVDC submarine cable test yard located in KEPCO(Korea Electric Power Corporation) Power Testing Center of South Korea. It proves that the fault location method proposed in this paper is very simple but very quick and accurate for HVDC submarine cable fault location.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.257-269
• /
• 2003

S(Synchrous)-DMT(Discrete Multi Tone) is an emerging cable modem technology applicable to the upstream channel for high speed multimedia communication. In this paper we analyze the transmitting and receiving process of S-DMT scheme and derive bit error probability of S-DMT scheme in the $\varepsilon$-mixture impulse noise model which appropriately reflects impulse noise model which approproately reflects impulse noise characteristics of upstream channel. The analysis results show a good match with the simulation results. We also compare Eb/No gain performance of S-DMT with TDMA in 16-, 32-, 64-QAM.

• Journal of Information Processing Systems
• /
• v.14 no.1
• /
• pp.270-279
• /
• 2018

PCI Express (PCIe) bus, which was only used as an internal I/O bus of a computer system, has expanded its function to outside of a system, with progress of PCIe switching processor. In particular, advanced features of PCIe switching processor enable PCIe bus to serve as an interconnection network as well as connecting external devices. As PCIe switching processors more advanced, it is required to consider the different adapter card architecture. This study developed multipurpose adapter cards by applying an on-board optical module, a latest optical communications element, in order to improve transfer distance and utilization. The performance evaluation confirmed that the new adapter cards with long cable can provide the same bandwidth as that of the existing adapter cards with short copper cable.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.631-639
• /
• 2019

Purpose: In this paper we present a case study of applying quick and easy experimental design approach to develop a Halogen free flame retardant material for cellular phone charger cable. Methods: We employ sequential experimentation of mixture design, verification design, and factorial design. A quick and easy approach is adopted based on data investigation and graphical method instead of strict statistical analysis, which helped enhancing smooth communication with the engineers and speeding up the development process. Results: Flame retardant material in pellet type produced from the optimal condition is transported to the customer and tested, to pass the customer retardancy criteria. Conclusion: The quick and easy experimental design approach is considered to be useful in this case study.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.159-163
• /
• 2019

The food service industry has been grown due to improvement of living standards. In addition, the demand for frozen food delivery is increasing day by day at online/offline and the refrigerated vehicles are used in most of these food distributions. One of the most important factors in a refrigerated car is to measure the temperature accurately. Conventional temperature recording systems are generally connected directly to temperature sensor modules. Since the temperature data are transmitted to the temperature recorder by using the electric wire, there is a disadvantage that the resistance error must be compensated according to the cable length. In this paper, we propose a method to correct errors due to cable resistance using digital processing and CAN (Controller Area Network) communication. We use PT-1000 platinum sensor to increase the accuracy of the temperature measurement.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.4
• /
• pp.135-142
• /
• 2011

Convergence between telecom and broadcasting is today a worldwide phenomenon. Diverse services like VoD, mobile broadcasting, IPTV and interactive services have already made their market debut or are currently being commercialized. Regulatory systems are also being revised to appropriately regulate this new breed of services. We propose the new model of educational broadcasting system using the internet network, it is not different conventional coaxial cable methods. Especially, we design the multicast method of the network using the limited channel and resource, propose the method of intercommunication in the school between the broadcasting system and database system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.4
• /
• pp.207-217
• /
• 2008

A novel scheme is presented for Traffic Encryption Key (TEK) rekeying with low communication overhead for an Internet Protocol television (IPTV) conditional access system over Data-Over-Cable Service Interface Specifications (DOCSIS) 3.0. The proposed scheme utilizes the DOCSIS system synchronization for periodic TEK rekeying instead of a conventional TEK rekeying negotiation process. Analysis shows that the communication overhead is only 0.012 Kbps when TEK rekeying frequency is 1 second.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.1
• /
• pp.111-118
• /
• 2011

In recent years, various types of partial discharge (PD) methods such as capacitive, inductive, electromagnetic, and acoustic coupling techniques have been developed for diagnosing rotating machines. An electromagnetic (EM) probe, which is an inductively coupled type of sensor, is required for detecting corona and internal discharges during off-line tests. In this study, a new technique for enhancing the measurement sensitivities for corona and internal discharge based on an EM inductive position sensor is proposed. An EM probe that winds wires around horseshoe-shaped and cylindershaped ferrites as helices is designed and optimized for the implementation of off-line PD monitoring of the stator winding of a rotating machine. The measurement system based on this design is implemented, and it is verified from the results of the experiment performed in this study that the probe provides similar performance as existing commercial products.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1122-1127
• /
• 2011

The thesis here by shows that the extant suspension wire, which is stretched between electric poles to support a variety of communication wires, can be replaced by specially-redesigned cables called OPSW(Composite Suspension Wire with Optical Fiber) which have been devised for the first time in the world so that the functions of both communication and support can be united into one cable which is sure to be successfully installed on site, hence leading to outstanding effects that it can sharply reduce the load applied to electric poles as well as the cost of forthcoming constructions and that it can accordingly make a great contribution to the building of Smart Grid network.