• Journal of the Korean Geographical Society
• /
• v.36 no.3
• /
• pp.247-257
• /
• 2001

The relationships between the distribution of 132 species, 61 genera evergreen broad-leaved trees and shrubs(EBTS) and climatic factors have discussed. The distributional patterns of EBTS were categorized into seven groups on the basis of the number of distributing sites, distributional attitudes and latitudes. Out of seven group. the cold-tolerant EBTS were common at groups I and II, along tilth Empetrum nigrum var. japonicum. Diapensia lapponics subsp. obovata of group III. However, the warmth-tolerant EBTS were rich at groups III. IV V, and VI The lower distributional limits of cold-tolerant EBTS in the groups I and UU decreased as one moves toward south. The upper distributional limit of warmth-tolerant EBTS in the groups III, IV and V decreased with increasing latitude. However. no clear distributional tendency is noticed in the groups VI and VII. The range of warmth-tolerant EBTS appear to show close relationship with the January mean temperature -4 $\^{C}$ and January mean minimum temperature -9$\^{C}$ than others. On the other hand, that of the cold-tolerant EBTS seem to respond well to the August mean temperature 19$\^{C}$ and August mean maximum temperature 26$\^{C}$ than others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.60-66
• /
• 2020

This paper presents a method for improving the selection of boundary areas suitable for Korea's situation based on domestic and foreign case studies on the establishment of boundary areas to protect people and the environment from chemical substances in response to chemical accidents and chemical terrorism. Currently, various related ministries are divided into hot zones, warm zones, and cold zones in common, but in specific areas, they are used in different ways in terms of terminology utilization. Therefore, it was suggested that the boundary areas be divided into four zones: hot zone, warm zone, cold zone, and safety zone. In addition, the terms warm zone and safety zone should be re-established. The existing ERPG acute exposure standard does not take into account various exposure times. Therefore, it is unsuitable for long-term exposure, so the priority of application should be AEGL, ERPG, PAC, and IDLHs. The CARIS information provision method is classified into substances that can or cannot be diffused or classified as indoor leaks. In addition, the wind direction trust line and the ERG's initial separation distance and protective action distance are expressed together so that they can be used for accident responses.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.4
• /
• pp.706-718
• /
• 1997

Ceramometal crowns are common restorations in fixed prosthodontics because of their casting accuracy, the high strength properties of the metal, and the cosmetic appearance of porcelain. However, deterioration of the initial fit of the metal coping has been observed after the porcelain firing cycle. The distortion due to repeated firing makes it difficult to fit crown margin and elicits microleakage. The major causes of distortion are the residual stress that accumulate during wax-up, casting, cold work and the induced stress caused by the mismatch of porcelain-metal thermal contraction. This study examined the marginal fit changes of metal copings in relation to repeated firing and the effects of heat treatment that reduce the distortion resulted from residual stress. The marginal changes of the copings that were treated with conventional method and those treated with heat before repeated firing, were evaluated. The metal die which represented preparations of a maxillary central incisor was fabricated, and 45 wax patterns were cast with nonprecious metal alloys. The heat treatment of each group was performed as follows. Group 1(control) : Casting - Devesting - Cold work - Firing Group 2 : Casting - Heat treatment - Devesting - Cold work - Firing Group 3 : Casting - Devesting - Cold work - Reinvesting - Heat treatment - Devesting - Firing The copings were fired 3 times. After each firing, the marginal fit changes were measured with inverted metallurgical microscope at the 4 reference points located at labial, lingual, and both proximal surface. Measurements were compared, and statistically analyzed. The results were as follows ; 1. In all groups, the highest value of marginal fit changes of the copings studied were found after the first firing cycle. 2. When the distortion of each experimental group at the first firing cycle were compared, group 1 exhibited the greatest changes($20-27{\mu}m$), followed by group 2($9-13{\mu}m$), and group 3($8-10{\mu}m$). 3. The copings treated with heat before devesting(group 2) revealed significantly smaller marginal fit changes than the copings treated with conventional method(group 1). (p<0.01) 4. The copings treated with heat after reinvesting(group 3) revealed significantly smaller marginal fit changes than the copings treated with conventional method(group 1). (p<0.01) 5. No siginificant differences in marginal fit changes were found between the copings treated with heat before devesting(group 2) and the copings treated with heat after reinvesting(group 3). (p>0.01)

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1363-1371
• /
• 2013

In this study, we estimate the interannual spatial and temporal distributions of fishing grounds at night in the East Sea based on satellite and in-situ data. We observe that the $15^{\circ}C$ thermal front moves in the north-south direction according to the movement of the warm water (above $18^{\circ}C$) in the Tsushima Warm Current (TWC) area, forcing the cold water area (below $10^{\circ}C$) to either expand or shrink. The interannual variations of sea surface temperature (SST) in winter represented by the indicator SST of $6^{\circ}C$ are consistent with the east-west zonal areas in the central East Sea which represented over $1^{\circ}C$ standard deviation of SST in February during 1990-2000. Annual SST in the fishing grounds of common squid fishing vessels, observed both by fishing vessels and satellites range from 9-$22^{\circ}C$, with the satellite-observed data having a larger range than the fishing vessel-based ones. The interannual distributions of the common squid fishing grounds in the East Sea are mostly concentrated in the TWC area in the southwestern part of the East Sea and in the coast of southern Honshu and Hokkaido in Japan. The interannual distributions of the nighttime fishing vessels are consistent with the catches investigated from the fishing vessel.

• The Journal of Korean Medicine
• /
• v.27 no.3 s.67
• /
• pp.227-240
• /
• 2006

Objective: To know the recurrence rate of paranasal sinusitis in adults using follow-up investigations. Method: Data was collected from 37 patients who were treated in the Department of Ophthalmology & Otolaryngology & Dermatology, Kangnam Oriental Medical Hospital from 2001-10-01 to 2005-05-31 for chronic paranasal sinusitis in adults over 21 years of age. Results & conclusions: 1. The males made up 51.4% and females made up 48.6%. The recurrence rate was 78.4%. 2. By residence, 78.4% lived in apartments; 21.6% lived in houses. 3. Of the main symptoms, nasal obstruction was the most common. 4. The duration of the disease was within 1 month to 40 years; the group with difficulties within the last 5 years made up the largest group. 5. The patients who had chronic nasal family histories made up 40.5%; Patients who didn't have chronic nasal family histories made up 59.5%. 6. In regards to the period of Tx distribution. the group treated within 4 weeks made up the largest group at 54.1%. 7. As far as methods of Tx distribution, the group of patients treated with herbal medicine and acupuncture were larger (62.2%) than the group treated with only herbal medicine (37.8%). 8. The most common nasal condition symptom in patient histories was chronic rhinitis. 9. The most frequent areas affected by paranasal sinusitis on PNS images were the lateral maxillary sinus, the unilateral maxillary sinus and the ethmoidal sinus. 10. The number of patients who drank little was larger (75.7%) than the number of drinking patients(24.3%); There were more non-smoking patients (78.4%) than smoking patients(16.2%). 11. The patients who slept for 6-7 hours made up the larger group (40.5%). 12. The number of patients who preferred warm water was larger making up 54.1 %; the number of patients that preferred cool water made up 21.6%. 13. The patients who had a common cold 3-5 times a year was the largest group at 54.1%.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.2 s.24
• /
• pp.238-244
• /
• 1988

This study was conducted to investigate the causes of burn and emergency cares taken on the spot for the burn patient. Study population included 161 burn patients admitted to 2 university hospitals and 1 general hospital in Taegu from November 1, 1987 to April 30, 1988. Patients or guardians were interviewed with a structured questionnare. Out of 161 burn patients 111(68.9%)were males and 50(31.1%) females. Preschool children of 1-4 years old accounted for 29.8% of the total patients. Burns of children under 15 years of age took place at home in 91.0%, while 48.3% of burns of adult (15 years and over)males occurred at the working place, and 68.0% of adult females occurred at the home. Out of total burns occurred at home 39.8% took place at kitchen/dining room and 24.1% in the room. The most common cause of burns in children was the boiling water or hot food (74.3%). In adults the common causes were electrical burn(22.4%), hot water or food(19.0%) and explosion(12.1%) for males, and hot water or food(32.0%) and explosion (20.0%) for females. Common emergency cares for the burn taken on the spot were undressing(64.6%), pouring Soju(liquor)(13.7%), and pouring cold water(5.0%). There were a few cases who applied ash, soy or salt. To prevent burn, it is recommended to remodel the traditional kitchen and coal-briquet hole, to strengthen the safety control of LP Gas and LN Gas supply, to educate the public for the handling method for such gases, to strengthen the occupational safety control, to improve the safety device for the electric wire and socket, and to limit the temperature of hot water at home and public baths.

• Current Optics and Photonics
• /
• v.2 no.3
• /
• pp.241-249
• /
• 2018

We report a midinfrared dual-field-of-view (FOV) optical system design for an airborne electro-optical targeting system. To achieve miniaturization and weight reduction of the system, it has a common aperture and fore-optics for three different spectral wavelength bands: an electro-optic (EO) band ($0.6{\sim}0.9{\mu}m$), a midinfrared (IR) band ($3.6{\sim}4.9{\mu}m$), and a designation laser wavelength ($1.064{\mu}m$). It is free to steer the line of sight by rotating the pitch and roll axes. Our design co-aligns the roll axis, and the line of sight therefore has a fixed entrance pupil position for all optical paths, unlike previously reported dual-FOV designs, which dispenses with image coregistration that is otherwise required. The fore-optics is essentially an achromatized, collimated beam reducer for all bands. Following the fore-optics, the bands are split into the dual-FOV IR path and the EO/laser path by a beam splitter. The subsequent dual-FOV IR path design consists of a zoom lens group and a relay lens group. The IR path with the fore-optics provides two stepwise FOVs ($1.50^{\circ}{\times}1.20^{\circ}$ to $5.40^{\circ}{\times}4.32^{\circ}$), due to the insertion of two Si lenses into the zoom lens group. The IR optical system is designed in such a way that the location and f-number (f/5.3) of the cold stop internally provided by the IR detector are maintained when changing the zoom. The design also satisfies several important performance requirements, including an on-axis modulation transfer function (MTF) that exceeds 10% at the Nyquist frequency of the IR detector pitch, with distortion of less than 2%.

• Herbal Formula Science
• /
• v.32 no.3
• /
• pp.277-296
• /
• 2024

Objective : Dyspepsia is one of the most common ailments among Koreans, leading to a continuously expanding market for liquid digestive solutions. These products are popular due to their convenience and low risk of side effects. However, there is a lack of research on the basic prescription composition of these ingredients and their precise indications according to Korean Medicine. Methods : Drugs were selected from the Korea Pharmaceutical Information Service website (http://www.health.kr), focusing on oral and liquid products classified under the Ministry of Food and Drug Safety's category of stomach and digestive aids (category 233). Frequency analysis was conducted to determine the occurrence and combinations of herbal ingredients within each product. Additionally, the four properties and five flavors of each product were calculated using their herbal ingredient composition ratios, and Pearson correlation coefficients were employed to verify the linear relationships between the composition ratios of the ingredients. Results : A comparative analysis of 33 liquid digestive medicines revealed that Zingiberis Rhizoma was the most frequently used herb. The most common dual-herb combination was Zingiberis Rhizoma and Citri Unshius Pericarpium, and the most prevalent tri-herb combination was Zingiberis Rhizoma, Citri Unshius Pericarpium, and Cinnamomi Cortex. Pearson correlation coefficient analysis showed a strong positive correlation between the composition ratios of Zingiberis Rhizoma and Cinnamomi Cortex. The analysis of four properties and five flavors indicated that products with warm and bitter flavors were the most common. Conclusions : The most frequently used herbal combination in liquid digestive solutions was Zingiberis Rhizoma, Citri Unshius Pericarpium, and Cinnamomi Cortex. This composition is suitable for treating dyspepsia caused by cold-dampness in the digestive system.

• Korean Journal of Head & Neck Oncology
• /
• v.9 no.1
• /
• pp.16-24
• /
• 1993

During 7 years, from Jan. 1986 to Dec. 1992, authors studied 208 cases of the surgically managed thyroid nodules at the Department of General Surgery, Han Kang Sacred Heart Hospital and obtained the following results. 1) Among the total 208 cases, male to female ratio was 1:11.2 in benign thyroid diseases and 1:9 in malignant thyroid diseases. The benign disease was prevalent between second and forth decade comparing with malignant disease between third and fifth decade. 2) The most common duration of illness was 3 months(26.0%). 3) Palpable neck mass was the most common chief complaint(100%). Palpitation. fatigue, and sweating were common complaints in patient with benign disease, and fatigue, palpitation, and sweating in malignant disease in decreasing order of frequency. 4) 55.8 % of lesions were in right lobe, 33.2% in left lobe, 5.8% in diffuse type, 4.8% in bilateral lobes, and 0.5% in isthmus. 5) The most common size of nodule was between 2.0cm and 3.9cm in diameter, which consisted of 55.1% of benign disease and 48.0% of malignant disease. 6) 86.5% of thyroid function test showed euthyroidism, 10.1% hyperthyroidism, and 3.4% hypothyroidism. 7) Thyroid scanning of 176 patients revealed cold nodules in 92.5% of benign diseases and in 92.9% of malignant diseases. 8) The most common benign disease was adenomatous hyperplasia(62.7%), and the most common malignant disease was papillary adenocarcinoma(80.0%). 9) Fine needle aspiration cytology was performed in 91 cases, and it showed 69.0% of sensitivity, 90.3% of specificity, and 83.5% of accuracy. 10) Frozen biopsy was performed in 109 cases. and it showed 93.9% of sensitivity, 100.0% of specificity, and 98.2% of accuracy. 11) The most commonly performed operation was unilateral lobectomy(including unilateral lobectomy with isthmectomy)(79.1%) in benign disease. and total thyroidectomy(62.0%) in malignant disease. 12) Postoperative complication showed 5 cases of wound infection (2.4%), 3 cases of transient hypoparathyroidism(1.4%), 3 cases of transient hoarseness(1.4%), 2 cases of postoperative bleeding(1.0%), 1 case of permanent hypoparathyroidism(0.5%), 1 case of permanent hoarseness(0.5%), and 1 case of postoperative pneumonia (0.5%).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.230-233
• /
• 2008

Stainless steels are alloy steels with iron as the primary constituent and chromium, nickel, and manganese as principal alloying elements. In addition to automotive, construction, and transportation industries, stainless steels have a variety of applications in the food, chemical, and pharmaceutical industries. Some common products made from stainless steel are sinks, wash basins, kitchen vessels, and cutlery. Among ferritic stainless steels, type 409 can be cold-formed easily and are used for deep-drawn parts such as vessels for the chemical and food industries. In this study, forming analyses and experiments to prevent the occurrence of inferiority such as wrinkles, crack, and neck for automotive muffler part are carried out to save the optimal conditions during forming by modifying the blank size and shape, blank holding force etc.