• Journal of Ecology and Environment
• /
• v.36 no.4
• /
• pp.211-216
• /
• 2013

The purpose of this study is to examine distribution and abundance of wintering raptors in Korea during 2000-2007 which is a rare data set for covering large landscape areas. Total 6,643 raptors of 16 species were recorded at 94 different points in west, south and east coasts, and rivers of inland areas all over Korea. During the study period, the most abundant raptors were black vulture (Aegypius monachus, 62.3%), common kestrel (Falco tinnunculus, 11.0%) and common buzzard (Buteo buteo, 10.0%), and these 3 birds were dominant species in inland areas and also considered as resident species except for black vulture. Also, there was a difference among 5 different habitat types. Black vultures were most found in estuaries whereas common buzzard and common kestrel could be found in coastal areas. Presumably raptors prefer reservoirs and estuaries probably due to lower human disturbance in these areas, and management efforts should be concentrated in inland areas for black vulture and coastal areas for common kestrel and common buzzard.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.17 no.4
• /
• pp.49-55
• /
• 2011

This study proposes proportions of functional areas in the ward of general hospitals, which are derived from 5 big university hospitals in order to establish the ward area standard for hospital design. The results of this paper are as follows. First, functional areas of hospital ward are composed of bedroom area, nursing area, training area, service area, and common area. Of course common area can be divided into first common area and secondary common area. The first common area(inter departmental common area) includes lobbies, elevator lobbies, corridors, restroom, and mechanical shafts. The secondary common area means the common area within special department such as ward or radiology department. Second, a standard method of calculating ward areas has been proposed: the standard is based on the center line of the wall between functional areas. Third, the proportions of 6 functional areas in ward are suggested.

• Korean Journal of Plant Resources
• /
• v.24 no.6
• /
• pp.666-674
• /
• 2011

To elucidate genetic diversity of common reed in Korea, we collected a total of 674 common reed plants from 27 regions in South Korea. Hierarchical clustering using 7 morphological traits divided the 27 common reed populations into 7 groups. Random amplified polymorphic DNA (RAPD) results identified three distinct groups of common reed. Common reed accessions in group I mostly inhabit coastal areas. Group II includes reeds mostly collected from inland areas. Group III consists of common reed accessions collected from inland and coastal areas, suggesting that this group might contain hybrids. In summary, we suggest that parapatric speciation might be an important factor in the genetic diversity of common reed and geographical speciation of common reed that might be also affected by environmental gradients.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.239-249
• /
• 2022

Fire resistance performance and performance design of fire doors are becoming more important to prevent the spread of fire and support the rapid evacuation of apartment buildings. In this study, a database using 182 evacuation spaces and 308 common areas that passed the fire performance test was established, and fire door performance influencing factors were derived through an analysis of the structure(12 elements) of the fire door. As a result, the effects of fire-resisting filler density, adhesive, and foam gasket were confirmed for evacuation space, and the effects of fire-resisting filler, adhesive, and fire fins were confirmed for common areas. In the fire door fire resistance test, flames and cracks were analyzed as the most frequent failure factors.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2012

This study was to analyze physical condition on the dormitory high school in Jeonju City, and find out users' satisfaction on that. This was going to contribute to the directions of it's physical environmental improvement. This was performed by a questionnaire survey method. Data were collected from 200 students, who had been dwelling 4 high school dormitories in Jeonju City. Through analyzing those data about library, diningroom, laundry room, break room, computer room, restroom, shower room, hall lounge, and snack bar in a dormitory, the results are as follows. First, students thought some physical conditions to be inconvenient in an distracted study atmosphere and hard furniture of library, a bad location of diningroom, a short laundry machine, lack of tables in a break room, a short performance and supply computer, a small space and short toilet in restroom, and a short of hall lounge and snack bar. Second, the students' satisfaction of common public areas in dormitory was 3.39 score. Students were concerned with library and restroom shower room through analyzing satisfied and unsatisfied areas. Third, they needed to improve heating, cooling, and noise in common areas of dormitory, and needed to support a breakroom and snack bar. Conclusively, library, restroom shower room, break room, and snack bar were important common areas, and indoor environmental elements - heating, cooling and noise- were important in high school dormitory.

• Journal of Environmental Impact Assessment
• /
• v.22 no.3
• /
• pp.277-290
• /
• 2013

This study was carried out to propose the new procedure to apply Habitat Evaluation Procedure(HEP) of target species using delphi technique, which is suitable to develop endangered species with few researches and ecological knowledges. To identify habitat quality of specific species in development project site, we can develop habitat model and create habitat suitability maps. In this study, we select the Common Kestrel(Falco tinnunculus) as target species in four areas(Paju, Siheung, Ansan, Hwaseong) which is located near the Seoul metropolitan area. The Delphi technique was selected to get the reliable information on the species and habitats requirements. Through the delphi approach, seven habitat components were determined as suitable variables for the Common Kestrel: density($n/km^2$) of small mammals, area($km^2$) of bare-grounds, pasturelands and riparian, and open area(%), spatial distribution and area of croplands, landscape diversity, breeding sites(tall trees, cliffs, high-rise buildings), and the length of shelf. Habitat variables used in this model were classified into two categories: % of suitable land-cover type(open areas, croplands, pasturelands, wetlands, and baregrounds) and the quality of feeding sites(within 250m from edges of woodlands). Habitat quality of the Common Kestrel was assessed against occurred sites derived from the nationwide survey. Predicted habitat suitability map were closely related to the observed sites of the endangered avian species in the study areas. With the habitat suitability map of the Common Kestrel, we assess the environmental impacts with habitat loss after development project in environmental impact assessment.

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.4
• /
• pp.41-51
• /
• 2016

This The purpose of this study is to evaluate user satisfaction with village bathhouses, selected from a two-year pilot project of common facilities for senior in rural areas from 2014 to 2015. A survey was conducted using a questionnaire to evaluate user satisfaction, and 135 questionnaires were collected from 18 common meal facilities. User satisfaction was evaluated in five categories with a five-point scale: location and spatial composition; emotions and intimacy; safety; nutrition; and maintenance and management. The results are as follows. First, when overall user satisfaction was evaluated on a five-point scale, the average score stood at 4.24 out of five points and 90.03 out of 100 points. These findings suggest that users were generally satisfied with the common meal facilities. Among five categories, scores except safety stood at four points or higher, indicating higher user satisfaction. Second, communal meal in rural areas have been carried out already but the environment for communal meal like cooking equipment, wastewater disposal, and space have been poor. However, the environment is improved through this pilot project, which has a positive effect to user satisfaction. Third, space planning for barrier-free or sanitary in storage of food containers are not adequate, which is necessary to detailed planning and concrete guideline.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.309-312
• /
• 2004

In mountainous area with high relief, topography may cause cast shadows due to the blocking of direct solar radiation. Remote sensing images of these landscapes display reduced values of reflectance for shadowed areas compared to non-shadowed areas with similar surface cover characteristics. A variety of approaches are possible, though a common step in various active approaches is first to delineate the shadows using automated algorithm and digital surface model (or digital elevation model). This articles demonstrates a common confusion caused by cast shadows

• Journal of Acupuncture Research
• /
• v.20 no.6
• /
• pp.168-181
• /
• 2003

Objective: The neuroanatomical studies on the acupoints(Waiguan(SJ5), Neiguan(Pe6), Sanyinjiao(SP6) and Xuanzhong(GB39)) projecting to the brain area related to dimentia using the pseudorabies virus (PRV-Ba strain) in the mouse was described. Methods: The common locations of the brain projecting to the Waiguan, Neiguan, Sanyinjiao and Xuanzhong following injection of PRV-Ba were histochemically observed. The results were as follows Results : 1. PRV-Ba labeled areas in medulla oblongata, pons and midbrain were similar to 4 acupoints, theses areas were related to autonomic center. 2. PRV-Ba labeled areas in diencephalon and cebrebrum were differently labeled according to the acupoints. 3. CNS labeled areas in Waiguan were dense labeled in CA1-3 area of hippocampus, amygdaloid nucleus, insular cortex, parietal cortex, entorhinal cortex, perirhinal cortex, dorsal endopiriform cortex, piriform cortex, amygdalopiriform transition and bed n. of stria terminalis. 4. CNS labeled areas in Neiguan were dense labeled in insular cortex, amygdaloid nucleus, parietal cortex, entorhinal cortex, perirhinal cortex, dorsal endopiriform cortex, piriform cortex, amygdalopiriform transition and bed n. of stria terminalis. 5. CNS labeled areas in Sanyinjiao were dense labeled in CA1-3 of hippocampus, suprachiasmatic n., dorsal endopiriform cortex, piriform cortex and bed n. of stria terminalis. 6. CNS labeled areas in Xuanzhong were dense labeled in suprachiasmatic n., dorsal endopiriform cortex and piriform cortex. Conclusions : Following these results, labeled acupoints in brain areas related to dimentia are Waiguan and Neiguan. Common labeled areas are amygdaloid n., entorhinal cortex, amygdaopiriform transition, bed n. stria terminalis and perirhinal cortex.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.5
• /
• pp.162-173
• /
• 1998

The high pressure common rail injection system offers a high potential for improving emmisions and performance characteristics in large direct diesel engines. High pressures in the common rail with electronic control allows the fuel quantity and injection timing to be optimized and controlled throughout a wide range of engine rpm and load conditions. In this study, high pressure supply pump, common rail, pipes, solenoid and control chamber, and nozzle were modeled in order to predict needle lift, rate of injection, and total injected fuel quantity. When the common rail pressure is raised up to 13.0 ㎫ and the targer injection duration is 1.0ms, the pressure drop in common rail is about 5.0㎫. The angle of effective pressurization is necessary to be optimized for the minimum pump drive torque and high pressure in common rail depending on the operating conditions. The characteristics of injection were also greatly influenced by the pressures in common rail, the areas of the inlet and exit orifice of the control chamber.