• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.342-344
• /
• 2008

24V DC power system of commercial vehicle includes 28V alternator and 24V battery bank (two 12V battery bank in series). BEQ(Battery Equalizer) provides efficient and reliable 12V DC power to 12V electrical load in 24V DC power system. In addition to providing 12V DC power, BEQ ensures that battery voltages remain equal which extends battery life. It is the most cost effective and efficient solution for dual voltage systems. BEQ made by Hyundai MOBIS is specifically designed to provide reliable 12V DC power for 12V ABS(Anti-lock Brake system).

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.25-29
• /
• 2008

Economic assessment of solar thermal power generation systems was carried out by calculating the levelized electricity cost. Four different commercial (or near commercial) solar thermal power systems (parabolic trough system, power tower system with saturated steam, power tower system with molten salts, and dish-stilting system) were considered for assessment. The assessment also included sensitivity analysis covering the effects of system capacity, direct normal insolation, and the system efficiency.

• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.74-79
• /
• 2002

계속되는 경제 성장과 고도 정보화 사회의 진전으로 전기에너지의 소비는 급격히 증가하고 있다. 특히 업무용 빌딩과 같은 전력다소비 건물에서는 전력의 효율적 이용에 의한 에너지절감은 물론 설계 단계에서의 합리적인 전기설비 설계가 요청되고 있다. 현재 우리나라의 기후 특성과 전력소비 특성을 고려한 합리적인 전기설비 설계를 위한 기초 자료가 매우 미흡한 실정이다. 본 연구는 업무용 빌딩의 전력소비특성을 조사하여 변전시설용량의 합리적 설계를 위한 수용률/부등률 적용 기준을 제시하고, 합리적 전기설비 설계를 유도하고자 한다.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권3호
• /
• pp.235-243
• /
• 2020

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.96-108
• /
• 2015

his study deals with a power conversion unit of an anti-start air conditioner compressor system for the commercial vehicle. In case of converter, to reduce the switching losses and current stresses of the device, applies LLC resonant topology. Transformer leakage inductance in the full-bridge converter is used for making the resonance with the capacitor of the voltage-doubler. Through this method we can increase power and decrease volume of system. Both circuit analysis and design guideline are described. So in this paper, power conversion unit is designed. 2.5kW anti-start air conditioner compressor system was implemented, and system operation and stability was verified through experiment.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.135-142
• /
• 2008

Hydraulic power steering system has been adopted in seniority passenger and commercial vehicle system for an easy maneuverability and a smoother ride. In this study, hydraulic power steering system analysis model which includes hydraulics and mechanical sub-systems was developed using commercial software, AMESim in order to predict characteristics for various steering components. Each component which constructs system was modeled and verified by experimentally obtained characteristics curves of each components. The parameter sensitivity analysis such as valve opening area, torsional stiffness of torsion bar for system design are carried out by the analysis and experimental method. The predicted results by the development model were a good agreement with experimentally obtained results. The sensitivity investigation results rotary torque when changing an input shaft edge width, was most sensitive, to change in angle and slot width and supply flow of input shaft edge is not a lot sensitively.

• 한국수자원학회논문집
• /
• 제30권5호
• /
• pp.495-501
• /
• 1997

펌프동력이 기지 값으로 주어져 있을 때, 유량이나 관경을 산정하는 경우 기존의 방법으로는 상당한 반복과정을 거쳐야 된다. 이에 유동훈과 강찬수(1996)는 균일조도 동력경사관인 경우 유량인 관경을 양해법으로 산정하는 식을 개발한 바 있다. 마찰계수 산정을 위한 지수함수식의 이용은 본 양해법 산정식의 개발을 가능하게 하였다. 유동훈(1995a)은 상용관이나 복합면을 가진 관의 마찰계수 산정을 위한 마찰계수 평균법을 제시한 바 있다. 그와 같은 접근방법으로 본고는 마찰계수 평균법을 상용관 마찰계수 산정식에 적용하여 동력경사 상용관의 유량이나 관경을 양해법으로 구할 수 있는 산정식을 개발하였다.

• 한국기계가공학회지
• /
• 제20권5호
• /
• pp.8-16
• /
• 2021

This study develops a shaft analysis model for the optimization of the power transmission system. The finite element method was used for the shaft analysis model. The shaft and gear were assumed Timoshenko beams. Strength was evaluated according to DIN 743, and gear misalignment was calculated through ISO 6336 and the coordinate system rotation. The analysis software for a power transmission system was developed using Visual Studio 2019. The analysis results of the developed program were compared with those of commercial software (MASTA, KISSsoft, and Romax). We confirmed that the force, deformation, and safety factors at each node were the same as those of the commercial software. The absolute value of the gear misalignment of the developed program and commercial software was different. However, the gear misalignment tended to increase with increasing the displacement in the tooth width direction.

• 수산해양교육연구
• /
• 제25권3호
• /
• pp.733-742
• /
• 2013

The Korea has significant tidal current energy resources, but it is so hard to work underwater for tidal turbine installation. Therefore commercial diving work is very important for tidal current generator. Also, Jangjuk channel is vary famous as proper area to generate tidal current energy. Nevertheless, no one is studied about characteristics of commercial diving works with installation of tidal current generator. The purpose of this study is to introduce commercial diving with work types and investigate critical limits of diving working under the conditions, which are working only to minutes at slack tide during the neap tide. As the results, work types are five as like mooring installation, OMAS(Offshore Maintenance Access System), support structure installation, cable and turbine installation. Here, the original construction period is expected about 4 months, but the construction take 18 months to complete. The cause of extends construction period is insufficiency of researching tidal current conditions at the site and ignorance of slack tide which need to secure diving working time. Total diving working times are 110th during 18 months, the highest percentage of diving times is turbine installation about 43.6 %, and cable, mooring installation and support structure construction are 27.3 %, 15.5 %, 13.6 %, respectively. On the basis of this study, estimation of times of commercial diving is possible with work types of tidal current power, and has a significance as basic data to determining construction period.

• 디지털융복합연구
• /
• 제2권1호
• /
• pp.93-112
• /
• 2004

A license under UCITA(Uniform Computer Information Transactions Act) which represents the first comprehensive uniform computer information licensing law is not fundamentally rooted in intellectual property law such as patent or copyright law. A license under UCITA is simply a commercial contract, dependent wholly on the parties' ability to enter into a normal, commercial contract, just as a contract of sale or lease is simply and wholly a commercial contract. However, intellectual property rights may be licensed in a contract subject to UCITA. UCITA may not be used to vary or extend informational rights that are intellectual property rights, and expressly recognizes preemption by copyright, patent, or other federal intellectual property law in Section 105(b). Like the law of sales and leases, in general, the right to contract is constrained by principles of unconscionability, good faith and fair dealing, UCITA has an additional restraint, an express power for a court to deny enforcement of a provision in a licensing contract that violates fundamental public policy. This public policy defense is unique in UCITA. An essential purpose of this defense is to give courts some latitude in reconciling commercial licensing law with the principles of intellectual property law. Most intellectual property law is federal, and UCITA expressly recognizes the preemptive effect of that federal law. But the public policy defense gives courts an additional power to consider intellectual property principles purely within the context commercial law.