• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.29-33
• /
• 2010

Satellites industry has been developing with the commercial and military needs. Because power system of satellite is very important to survival operation and hard to test, increasing reliability is very critical. Due to LEO small satellites are very sensitive to power system, effective stabilization control is important. Therefore, this paper introduce methods for general modeling of power converting system which it can be used design of controller and analysis of external disturbance influences. In conclusion, a modeling of LEO small satellites power converting system and a possible guide line to design reliable controller which optimizing power converters of LEO small satellite are generated.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.3
• /
• pp.22-29
• /
• 2008

Clean and renewable energy technologies using ocean energy give us non-polluting alternatives to fossil and nuclear-fueled power plants to meet establishment of countermeasures against the global warming and growing demand for electrical energy. Among the ocean energy resources, wave power takes a growing interest because of its enormous amount of potential energy in the world. Therefore, various types of wave power conversion system to capture the energy of ocean waves have been developed. However, suitable turbine type is not normalized yet because of relatively low efficiency of the turbine systems. The purpose of this study is to investigate the internal flow and performance characteristics of a cross-flow type hydro turbine, which will be built in a caisson for wave power generation. Numerical simulation using a commercial CFD code is conducted to clarify the effects of the turbine rotation speed and flow rate variation on the turbine characteristics. The results show that the output power of the cross-flow type hydro turbine with symmetric nozzle shape is obtained mainly from Stage 2. Turbine inlet configuration should be designed to obtain large amount of flow rate because the static pressure and absolute tangential velocity are influenced considerably by inlet flow rate.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1421-1423
• /
• 2003

Ultra Wideband is a new technology from commercial or civilian application viewpoint. It uses already allocated radio spectrum without causing significant interference to other users. It uses very low power, which is below the thermal noise of the receiver and is inherently difficult to detect by un-intentional users. Since, FCC approved the regulation for the commercial use of UWB in February 2002, the development of UWB technology is drastically gaining momentum. However, the technology itself is not new. It has already been used in military applications. UWB has three basic areas of applications, which are communication, positioning and imaging (UWB Microwave). The main commercial application will be for communication since it has very high data transfer rate for short distance. It can also be used for both indoor and outdoor 3-D positioning. Another important application is imaging like microwave remote sensing. An UWB sensor can pass through doors and walls and hence detect the objects inside the room. In this paper, we will introduce about UWB technology along with it’s various possible applications. We will also present some models to generate UWB signal and it’s analysis using signal-processing tools.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.3
• /
• pp.389-396
• /
• 2017

Restorations of automotive parts have been done ever since the first vehicle was produced. Because the most expensive parts of a vehicle are in the engine system, there have been various restoration methods developed for engine parts. In the case of commercial diesel engines, the fuel injection device is a key and expensive component. It also has a significant effect on vehicle performance. In particular, reduced engine power and increased exhaust gas emissions may result from mechanical damage due to abrasion of the spill valve in the fuel injection system of a diesel engine. In this paper, restoration techniques for damaged parts are applied to restore the abrasion of a spill valve of fuel injection, also called as the "unit injector", of commercial diesel engines. In order to recover the damage, optimized polishing techniques using hard-metal and coating processes are applied. To evaluate restoration techniques for the spill valve, performance and durability tests are performed on a test bench.

• Journal of Energy Engineering
• /
• v.7 no.2
• /
• pp.223-230
• /
• 1998

Energy consumption statistics have been surveyed for 50 large commercial buildings with high energy consumption records in Seoul City. The buildings were classified into three different groups for data analysis: hospitals, hotels, and department stores/office buildings. The analysis was focused on identifying installed boiler and refrigerator data, energy consumption rates, and energy load distribution throughout the year. Refrigerating electricity was confirmed again to affect most on the formation of the summer electricity load peak as expected. Replacing the refrigerator electricity peak in the summer with co-generation in large commercial buildings. However, overall heat load distribution in a single building is still considered not large enough for economically feasible co-generation and thus joint co-generation for multiple neighboring buildings are preferred and the Electric Power Law and LNG pricing policy should be revised favorably for co-generation in advance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.1
• /
• pp.1-12
• /
• 2002

Flour characteristics of Korean winter wheat grown in Suwon in 1997 and 1998, and in Suwon and Deokso in 1998 were evaluated. Korean winter wheat cultivars were significantly influenced by years and locations in flour properties such as ash content, protein content, damaged starch content, starch swelling volume and power. Protein content was highly correlated with starch damage and alkaline water retention capacity. There were highly significant correlations between mixing time of mixograph and SDS sedimentation volume. Swelling properties of flour and starch were highly correlated with pasting properties of flour and starch, respectively. Compared to commercial flours for baking, Alchanmil, Gobunmil, Keumkangmil and Tapdongmil showed similar protein content, SOS sedimentation volume and mixograph mixing time. Eunpamil, Geurumil, Olgeurumil, Suwon 258, Suwon 261, Suwon 265, Suwon 275, Suwon 276, Suwon 277, Suwon 278 and Urimil had similar values to commercial noodle flours in SDS sedimentation volume. Alchanmil, Olgeurumil, Suwon 274, Suwon 275, Suwon 276 and Urimil showed higher swelling and pasting properties than the others. Chokwang, Olgeurumil, Suwon 277 and Urimil were similar to commercial cookie flours. Friabilin-absence lines showed higher protein content and starch damage than those of friabilin-presence lines. Absence lines of 1D$\times$2.2 + 1Dy12 subunit in high molecular weight glutenin subunits showed higher SDS sedimentation volume and mixing time of mixograph than those of presence lines.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.741-751
• /
• 2012

This study was conducted to understand sensory characteristics of commercial functional beverages, to analyze and the drivers of liking and disliking of it by Korean consumers. Descriptive analysis and consumer taste testing were conducted with ten commercial products of functional beverages. Samples were consisted of good for beauty, relieving hangovers, and health tonics. For the descriptive analysis, 45 attributes were developed by ten panelists and it shows differences among the all samples. For the consumer testing, 81 panels evaluated the overall liking, acceptance of appearance, odor, flavor, and texture of 10 samples. As a result, attributes of brightness, yellow color, Nurungji flavor, roasted bean power flavor, and milky texture of functional beverages were positive drivers of liking, but attributes of astringent texture, bitter taste, and viscosity were negative drivers of liking on the commercial functional beverages.

• Journal of the Korean housing association
• /
• v.20 no.2
• /
• pp.109-118
• /
• 2009

In general, the decay of the residential district has been considered a phenomenon of old towns. But now it has become a problem of new development areas too, which have been a cause of the decay of old town. This study aims to investigate the decay of the residential district in the new development area. The survey site was Dunsan, a town-intown of Daejeon metropolitan city. The findings were as follows (:) 1) even in the new development area, a high level of vacancy ratio was evident. ; 2) among the buildings above ground, 1st floor showed the highest vacancy ratio, which means the 1st floor was allotted to too many commercial facilities relative to the buying power size in this district. ; 3) there were many conversions in response to the decay of the district, from residential to commercial, and commercial to residential. ; and 4) the allocation of each type of conversion showed a spatial pattern.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2014

In this study, to analyze characteristics of acoustic pressure for spot spray type megasonic, FEM analysis was performed for variable parameters based on the structure of commercial one. and 2 models of transmitter were designed and fabricated, and then acoustic pressure distribution(APD) of the transmitter was measured and compared to the commercial. The results of this experiment show that maximum acoustic pressure of model 1 was higher to 1.6 times compared to the commercial, and model 2 was higher to 1.23 times. Through the course of this study, design technology of transmitter has been developed by means of FEM analysis and experiment for characteristics of acoustic pressure. Also, it is expected to be useful in the development of high power spray type megasonic that is necessary with advance in semiconductor technology.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.399-400
• /
• 2007

In this work, we have investigated the characteristics of the phosphorescent OLED and flexible OLED fabricated on IZTO/glass and IZTO/PET anode film grown by magnetron sputtering, respectively. Electrical and optical characteristics of amorphous IZTO/glass anode exhibited similar to commercial ITO anode even though it was deposited at room temperature. In addition, the amorphous IZTO anode showed higher work function than that of the commercial ITO anode after ozone treatment for 10 minutes. Furthermore, a phosphorescent OLED fabricated on amorphous IZTO anode film showed improved current-voltage-luminance characteristics, external quantum efficiency and power efficiency in contrast with phosphorescent OLED fabricated on commercial ITO anode film. This indicates that IZTO anode is promising alternative anode materials for anode in OLEDs and flexible OLEDs.