• Journal of Animal Science and Technology
• /
• v.51 no.3
• /
• pp.201-206
• /
• 2009

Seventeen porcine microsatellite (MS) markers recommended by the EID+DNA Tracing EU project, ISAG and Roslin institute were selected for the use in porcine individual and brand identification. The MSA, CERVUS, FSTAT, GENEPOP and API-CALC programs were applied for calculating heterozygosity indices. By considering the hetreozygosity value and PCR product size of each marker, we established a MS marker set composed of 13 MS markers (SW936, SW951, SW787, S00090, S0026, SW122, SW857, S0005, SW72, S0155, S0225, SW24 and SW632) and two sexing markers. The expected probability of identity among genotypes of random individuals (PI), probability of identity among genotypes from random half sibs ($PI_{half-sibs}$) and among genotypes of random individuals, probability of identity among genotypes from random sibs($PI_{sibs}$) were estimated as $2.47\times10^{-18}$, $6.39\times10^{-13}$ and $1.08\times10^{-8}$, respectively. The results indicate that the established marker set can provide a sufficient discriminating power in both individual and parentage identification for the commercial pigs produced in Korea.

• Journal of radiological science and technology
• /
• v.31 no.2
• /
• pp.183-188
• /
• 2008

Aim of this study is to investigate the feasibility of 2D ion chamber array as a substitute of the water phantom system in a periodic Linac QA. For the feasibility study, a commercial ion chamber matrix was used as a substitute of the water phantom in the measurement for a routine QA beam properties. The device used in this study was the I'm RT MatriXX (Wellhofer Dosimetrie, Germany). The MatriXX consists of a 1,020 vented ion chamber array, arranged in $24{\times}24\;cm^2$ matrix. Each ion chamber has a volume of $0.08\;cm^3$, spacing of 0.762 cm. We investigated dosimetric parameters such as dose symmetry, energy ($TPR_{20,10}$), and absolute dose for comparing with the water phantom data with a Farmer-type ionization chamber (FC65G, Wellhofer Dosimetrie, Germany). For the MatriXX measurements, we used the white polystyrene phantom (${\rho}:\;1.18\;g/cm^3$) and also considered the intrinsic layer (${\rho}:\;1.06\;g/cm^3$, t: 0.36 cm) of MatriXX to be equivalent to water depth. In the preliminary study of geometrical QA using MatriXX, the rotation axis of collimator and half beam junction test were included and compared with film measurements. Regarding the dosimetrical QA, the MatriXX has shown good agreements within ${\pm}1%$ compared to the water phantom measurements. In the geometrical test, the data from MatriXX were comparable with those from the films. In conclusion, the MatriXX is a good substitute for water phantom system and film measurements. In addition, the results indicate that the MatriXX as a cost-effective novel QA tool to reduce time and personnel power.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.24-34
• /
• 2008

To mitigate the climate change and global warming, various technologies have been internationally proposed for reducing greenhouse gas emissions. Especially, in recent, carbon dioxide capture and storage (CCS) technology is regarded as one of the most promising emission reduction options that $CO_2$ be captured from major point sources (eg., power plant) and transported for storage into the marine geological structure such as deep sea saline aquifer. The purpose of this paper is to review the latest progress on the development of technologies for $CO_2$ storage in marine geological structure and its perspective in republic of Korea. To develop the technologies for $CO_2$ storage in marine geological structure, we carried out relevant R&D project, which cover the initial survey of potentially suitable marine geological structure fur $CO_2$ storage site and monitoring of the stored $CO_2$ behavior, basic design for $CO_2$ transport and storage process including onshore/offshore plant and assessment of potential environmental risk related to $CO_2$ storage in geological structure in republic of Korea. By using the results of the present researches, we can contribute to understanding not only how commercial scale (about 1 $MtCO_2$) deployment of $CO_2$ storage in the marine geological structure of East Sea, Korea, is realized but also how more reliable and safe CCS is achieved. The present study also suggests that it is possible to reduce environmental cost (about 2 trillion Won per year) with developed technology for $CO_2$ storage in marine geological structure until 2050.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.2
• /
• pp.39-45
• /
• 2011

The Korean distribution industry is gearing up for an endless competition. Greeting low growth era, less competitive parties will be challanged seriously for their survival. But for large discount stores, they have shown steady annual growth for years. However, because of the saturation for numbers of stores, the difficulty of gaining new sites, and the changes in the consumer's consumption behavior caused by the recession, now they are seeking for a new customers-based business formats. Accordingly, a large corporate comopanies made supermarkets which are belonged to affiliated companies of large corporate comopanies. They based on the strong buying power, focused on SSM(Super Super Market) ave been aggressively develop nationwide multi-stores. The point is that these stores are threatening at small and medium-sized, community-based private supermarkets. Private supermarkets and retailers, who are using existing old operation systems and their dilapidated facilities, are losing a competitive edge in business. Recent the social effects of large series of corporate supermarkets for traditional markets has been very controversial, and commercial media, academia, and industry associated with it have been held many seminars and public hearings. This may slow down the speed in accordance with the regulations, but will not be the crucial alternative. The reason for this recent surge of enterprise-class SSM up, one of the reasons is a stagnation in their offline discount mart, so they are finding new growth areas. Already in the form of large supermarkets across the country got most of the geographical centre point and is saturated with stages. Targeting small businesses that do not cover discount Mart, in order to expand business in the form of SSM is urgent. By contrast, private supermarkets are going to lose their competitiveness. The vulnerability of individual supermarkets, one of the vulnerabilities is price which economies of scale can not be realized so they are purchasing a small amount of products and difficult to get a quantity discount. The lack of organization and collaboration, and education which is not practical, caused the absencer of service-oriented situations. As a first solution, making specialty shops which are handling agricultures, fruits and vegetables and manufactured goods is recommended. Second, private supermarkets franchisees join the organization for the organization and collaboration is recomaned. It can be meet the scale of economy and can be formed a alternative business formats to a government. Third, the education is needed as a good service will get consumer's awareness. In addition, a psychological stores operating is also one way to stimulate consumer sentiment as SSM can't operate. Japan already has a better conditions of their lives through small chain expression. This study includes the vulnerabilities of private supermarkets, and suggests a competitiveness reinforcement strategies.

• Korean Security Journal
• /
• no.22
• /
• pp.91-111
• /
• 2010

Around the middle of the ninth century the strict bone-rank system of Silla frustrated many people who had political ambition but lacked nobility. They had to seek other ways, including maritime trade. Such an undertaking reflected and also increased their economic and military power. Trade prospered with T'ang China and with Japan as well. The threat of piracy to Silla's thriving maritime trade caused to create a succession of garrisons at important coastal points. Chonghae Jin (Chonghae garrison) was regarded as the most important of these. It was established in 828 by Chang Pogo. Chonghae Jin was on Wando, an island just east of the southwestern tip of Korea and a key place at this time in the trade between China, Korea, and Japan. From this vantage point Chang Pogo became a merchant-prince with extensive holdings and commercial interests in China and with trade contacts with Japan. Although piracy was rampant in East Asia at that time, either the Chinese or Silla government was not able to control it due to inner political strife and lack of policing resources. Infuriated by the piracy and the government's inability to control it, Chang Pogo came back to Silla to fight against the pirates and to protect maritime trade. He persuaded the king of Silla and was permitted to control the private armed forces to sweep away the pirates. In 829 he was appointed Commissioner of Chonghae-Jin with the mission of curbing piracy in that region. Chang's forces were created to protect people from pirates, but also developed into traders among Silla Korea, T'ang China, and Japan in the 9th century. This was geographically possible because the Chonghae Garrison was situated at the midpoint of Korea, China, and Japan, and also because Chang's naval forces actually dominated the East Asia Sea while patrolling sea-lanes. Based on these advantages, Chang Pogo made a great fortune, which might be collected from a charge for protecting people from pirates and the trades with China and Japan. Chang's forces could be termed the first private security company in the Korean history, at least in terms of historical documents. Based on historical documents, the numbers of private soldiers might be estimated to exceed tens of thousands at least, since Chang's forces alone were recorded to be more than ten thousand. Because local powers and aristocratic elites were said to have thousands of armed forces respectively, the extent of private forces was assumed to be vast, although they were available only to the privileged class. In short, the domination of Chang's forces was attributable to the decline of central government and its losing control over local powers. In addition it was not possible without advanced technologies in shipbuilding and navigation.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.687-693
• /
• 2006

The Stone Powder Sludge(below SPS) is the by-product from the process that translates stone power of 8mm under as crushed fine aggregate. It is the sludge as like cake that has average particle size of $7{\mu}m$, absorbing water content of 20 to 60%, and $SiO_2$ content of 60% over. Because of high water content of SPS, it is not only difficult to handle, transport, and recycle, but also makes worse the economical efficiency due to high energy consuming to drying. This study is aim to recycle SPS as it is without drying. Target product is the lightweight foamed concrete that is made from the slurry mixed with pulverized mineral compounds and foams through hydro-thermal reaction of CaO and $SiO_2$. Although in the commercial lightweight foamed concrete CaO source is the cement and $SiO_2$ source is high purity silica powder with $SiO_2$ of 90%, we tried to use the SPS as $SiO_2$ source. From the experiments with factors such as foam addition rate and replacement proportion of SPS, we find that the lightweight foamed concrete with SPS shows the same trends as the density and strength of lightweight foamed concrete increases according to decrease of foam addition rate. But in the same condition, the lightweight foamed concrete with SPS is superior strength and density to that with high purity silica. This trends is distinguished according to increase of replacement proportion of SPS, also the analysis of XRF shows that the hydro thermal reaction translates SPS to tobermorite. Although SPS has low $SiO_2$ contents, the lightweight foamed concrete with SPS has superior strength and density, because it reacts well with CaO due to extremely fine particles. We conclude that it is possible to replace the high purity silica as SPS in the lightweight foamed concrete experimentally.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.31-38
• /
• 2015

At present, carbon dioxide ($CO_2$) emission, which causes global warming, is a major issue all over the world. To reduce $CO_2$ emission directly, commercial deployment of $CO_2$ separation processes has been attempted in industrial plants, such as power plant, oil refinery and steelmaking plant. Besides, several studies have been done on indirect reduction of $CO_2$ emission from recycle of reducing gas (carbon monoxide or hydrogen containing gas) in the plants. Unlike many competing gas separation technologies, pressure swing adsorption (PSA) and membrane filtration are commercially used together or individually to separate a single component from the gas mixture. However, there are few studies on operation of sequential separation process of multi-component gas which has more than two target gas products. In this paper, process simulation model is first developed for two available configurations: $CO_2$ PSA-CO PSA-$H_2$ PSA and $CO_2$ PSA-CO PSA-$H_2$ membrane. Operation optimization and economic evaluation of the processes are also performed. As a result, feed gas contains about 14% of $H_2$ should be used as fuel than separating $H_2$, and $CO_2$ separation should be separated earlier than CO separation when feed gas contains about 30% of $CO_2$ and CO. The simulation results can help us to find an optimal process configuration and operation condition for separation of multicomponent gas with $CO_2$, CO, $H_2$ and other gases.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1865-1872
• /
• 2015

This study attempted to investigate consumer perceptions and attitudes towards reducing sugar intake by providing data to develop guidelines for the government and food-related industries to encourage Korean consumers to maintain appropriate levels of sugar intake. A survey was conducted on 238 adult consumers regarding their purchasing power for products with high sugar content in Seoul and Bundang, Gyeonggi area from September 1~30, 2013. Nutritional information on sugary products had a greater impact than media and others' recommendations on consumer awareness regarding need to reduce sugar intake. External factors such as health and weight control were stronger reasons for consuming reduced amounts of sugar or sugar-free products than internal factors such as sweetness. However, internal factors-such as taste-did not have a greater effect on consuming reduced amounts of sugar or sugar-free products than environmental factors-such as absence of purchase channels. Consumers indicated higher acceptance for 50% reduction in sweetness of existing commercial products. Regarding methods of lowering sugar intake, sugar replacement and reducing sugar consumption both generally and at home were preferred. In addition, consumers were likely to pay 10~14% more for sugar-reduced products than for existing products. Overall, consumers expressed positive attitudes towards reducing sugar intake in the future, although those in their twenties tended to be more passive than other age groups.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.126-134
• /
• 2017

There have been numerous studies on extracting the R-peak from electrocardiogram (ECG) signals. However, most of the detection methods are complicated to implement in a real-time portable electrocardiograph device and have the disadvantage of requiring a large amount of calculations. R-peak detection requires pre-processing and post-processing related to baseline drift and the removal of noise from the commercial power supply for ECG data. An adaptive filter technique is widely used for R-peak detection, but the R-peak value cannot be detected when the input is lower than a threshold value. Moreover, there is a problem in detecting the P-peak and T-peak values due to the derivation of an erroneous threshold value as a result of noise. We propose a robust R-peak detection algorithm with low complexity and simple computation to solve these problems. The proposed scheme removes the baseline drift in ECG signals using an adaptive filter to solve the problems involved in threshold extraction. We also propose a technique to extract the appropriate threshold value automatically using the minimum and maximum values of the filtered ECG signal. To detect the R-peak from the ECG signal, we propose a threshold neighborhood search technique. Through experiments, we confirmed the improvement of the R-peak detection accuracy of the proposed method and achieved a detection speed that is suitable for a mobile system by reducing the amount of calculation. The experimental results show that the heart rate detection accuracy and sensitivity were very high (about 100%).