• 한국주조공학회지
• /
• 제22권4호
• /
• pp.192-199
• /
• 2002

Dimensional defects of castings are mainly due to the stresses and strains caused by a nonuniform temperature distribution and phase transformation during solidification and cooling, and by mechanical constraint between the mold and casting. It is, however, nearly impossible to trace movements of the casting and mold during solidification and cooling by experimental measurements for castings with complex shape. Two and three dimensional deformation analyses of the casting and the mold were performed using commercial finite element code, MARC. It was possible to calculate deformation and temperature distribution in the casting and mold simultaneously. Cooling curves of the casting obtained by calculation were close to that measured in the field since it was possible to treat latent heat evolution of the casting which could be divided into two parts, primary and eutectic parts. Mold bent inward just after pouring due to the temperature gradient across the mold thickness, and mold returned to its previous position with time. Plastic deformation occurred at the part of the casting where solidification was slow.

• 한국항행학회논문지
• /
• 제16권1호
• /
• pp.35-40
• /
• 2012

본 논문에서는 선박 통신용 HF 휩 안테나의 소형화 방법을 제안한다. HF 휩 안테나의 크기를 줄이기 위해 선형 휩 안테나의 끝 부분을 헬리컬 형태로 변형하였다. 상용 휩 안테나에 비해 60% 정도의 크기를 갖는 휩 안테나를 설계하였고, 상용의 휩 안테나와 변형된 휩 안테나를 사용한 통신실험을 수행하였다. 실험을 통해 제안하는 휩 안테나가 선박 통신용 상용 휩 안테나를 대체할 수 있음을 확인하였다.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.970-977
• /
• 2008

This paper deals with the dynamic characteristics of the shaft with impeller model which is the most important part in developing the resin mixing machine. Through reverse engineering, it is possible to make the shaft with impeller geometry model which is necessary vibration characteristic analysis by commercial impeller. The natural frequency analysis and structural analysis using finite element analysis software are performed on the imported commercial shaft with impeller model. The most important fundamental natural frequency of the shaft with impeller model is around 14.5 Hz, which well agrees with modal testing. The most effective design variables were extracted by ANOM(analysis of means) and pareto chart. This paper presents approximation 2nd order polynomial as design variables using RSM(response surface methodology). Generally, RSM take 2 or 3 design variables, but this method uses 5 design variables with table of mixed orthogonal array. Further more, the analyzed result of the commercial shaft with impeller is to be utilized for the structural design of resin chock mixing machine.

• Archives of Pharmacal Research
• /
• 제21권5호
• /
• pp.514-520
• /
• 1998

Simple and accurate methods to detect the adulteration of commercial aloe gel powder were developed. Crude polysaccharide in aloe gel powder was isolated by precipitating with excess ethyl alcohol and total hexose in isolated polysaccharide was determineded by dubois assay. After hydrolysis of non-dialysable polysaccharides, resultant free sugar was determined by gas chronmatography for sugar recogniton and ash contents was very low while the content of total hexose was very high. And polysaccharides of these products revealed typical dextran pattern, therefore, these products could be identified that adulterated with commercial maltodextrin. The content of maltodextrin in adulterated product was determined by HPLC and TLC analysis which could be adopted as a part of a certification process.

• 한국중재학회지:중재연구
• /
• 제23권4호
• /
• pp.139-167
• /
• 2013

Mediation, which is part of ADR, is a method used to settle disputes amicably by employing a third party who is in a neutral position. Utilization and attention on meditation are increasing in place of litigation and arbitration owing to its effectiveness in terms of time, cost, and effectiveness in achieving an amicable settlement. As to Korea, mediation at the civil level was employed by the KCAB in July 2012 but its utilization was in ABC stage compared to mediation at the governmental and judicial levels. Based on this situation, this study reviewed the guideline and system of the KCAB through a comparison of the management system between the KCAB and AAA where mediation was in good use. This study further suggests solutions as to the development of an international commercial mediation system First, the KCAB rule is needed to create a mediation language, mediation place, mediator internationalization, and so on. Second, a system backup is necessary to ensure the enforceability and effectiveness of mediation. Third, a unified mediation law in Korea is desirable for the harmonization of mediations at civil, governmental, and judicial levels. The unified mediation law, if it is made, may lead to an international base where this requirement exists. Fourth, advertising the merits of mediation to the public is necessary. Fifth, securing specialized mediators and relevant training are essential. If the above requirements are implemented, Korea would advance in international commercial disputes.

• Environmental Analysis Health and Toxicology
• /
• 제17권3호
• /
• pp.207-217
• /
• 2002

This study was designed to investigate the characteristics of atmospheric concentrations of toxic volatile organic compounds (VOCs) in Korea. Target compounds included 1,3-butadiene, aromatics such as BTEX, and a number of carbonyl compounds. In this paper, as the second part of the study, the seasonal and locational concentrations of atmospheric VOCs were evaluated. Sampling was conducted seasonally at seven sampling sites. each of them representing a large urban area (commercial and residential), a small urban area (commercial and residential), an industrial area (a site within the complex and a residential), and a background place in Korea. In general, higher concentrations were found in the petro-chemical industrial site than other sites, while VOCs measured in commercial (heavy -traffic) sites were higher than residential sites. Seasonality of VOCs concentrations were not so much clear as other combustion related pollutants such as sulfur dioxide, indicating that the VOCs are emitted from a variety of sources, not only vehicle exhaust and point sources but fugitive emissions. Except the industrial site, the concentrations of VOCs measured in this study do not reveal any serious pollution status, since the levels did not exceed any existing ambient standards in the U.K. and/or Japan. However, the increasing number of petrol -powered vehicles and the rapid industrialization in Korea may result in the increased levels of VOCs concentrations in many large urban areas in the near future, if there is no appropriate programme implemented for the control of these compounds.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.55-63
• /
• 2013

To offer a basic information for the fibers of commercial leaflets, authors examined and analyzed the distribution, size, and printing types of leaflets sandwiched in the newspaper. The number of different leaflet size were almost 30 in two years including B5 ($182{\times}257mm$), A4 ($210{\times}297mm$), B4, ($257{\times}364mm$), A3 ($297{\times}420mm$), and large flyers such as $545{\times}395mm$, and $790{\times}550mm$. The number of different leaflets size were 25 in 2011, which was reduced to 15 in 2012. Both the number and amount of the leaflets were reduced. The high quality leaflets were issued and distributed in the corporate sector and the leaflets issued in other sectors such as shopkeeping, restaurant business, educational institutions were one-sided leaflets printed on single side of the paper. Compared to the previous year, large stores showed the increased number of leaflets but the number of leaflets from restaurant business and educational institutions and building trade were decreased.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권11호
• /
• pp.1638-1643
• /
• 2014

This study was conducted to compare carcass characteristics and physico-chemical meat quality in two different genotype ducks raised under identical feeding and rearing conditions. A total of ninety 1-d-old Korean native ducks (KND, n = 45) and commercial meat-type ducks (Grimaud, n = 45) were fed same experimental diets during 56 d and 42 d, respectively to obtain similar slaughter weights. The experimental diet for starter period contained 20% crude protein (CP) and 2,900 kcal nitrogen corrected true metabolizable energy (TMEn)/kg of diet and that for grower period contained 17% CP and 3,050 TMEn/kg of diet. Average daily gain and feed efficiency of KND were inferior to those of commercial meat-type ducks (p<0.05). Carcass weight was not different between two genetically different ducks, but carcass yield of KND was significantly higher (p<0.05) than that of commercial meat-type ducks. There were no significant differences in cooking loss and pH of breast meat between two genetically different ducks, but water holding capacity of KND was significantly higher than that of commercial meat-type ducks. The linoleic acid and total polyunsaturated fatty acid of breast meat from KND were significantly higher (p<0.05) than the corresponding part from commercial meat-type ducks. Significant differences were detected in water holding capacity and the content of linoleic acid and polyunsaturated fatty acid, which were significantly higher in KND, whereas growth performance tended to be superior in commercial ducks. At the market weight, the meat from KND was judged to have better qualities with regard to higher water holding capacity and greater content of polyunsaturated fatty acid compare with meat from commercial meat-type duck.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3101-3101
• /
• 2001

Near Infrared spectroscopy (NIR) used on human skin measurement was explored in the past decade. Many publications in different journals and magazines discussed the feasibility of the NIR technique for cosmetic product property studies. Based upon the results of pioneers, we have pursued some work of the NIR instrument coupled with a probe module for skin measurement in vivo and vitro. In part I of this paper, the specific Near Infrared spectroscopy instrument stability, human subject conditions and other parameters, which could affect the measurements reproducibility are discussed. Second derivative NIR spectra and Principle Components Analysis (PCA) are utilised for data interpretation. In part II of this paper, the relationship of human skin moisture and ageing, the gender information and finally, the discovery of penetration depth of NIR incident light on skin are reported. A theoretical penetration depth calculation equation is proposed. In part III, the study results of a couple of commercial skin care products effect will be described. The skin lotions were applied on human skin (in vivo) in order to exam the NIR feasibility to monitor the changes of moisture level. The results are consistently positive. From our primary study, it can conclude that the NIR is potentially a very powerful instrument for skin condition diagnostics, either for cosmetic and/or for medication purposes.

• 반도체디스플레이기술학회지
• /
• 제7권3호
• /
• pp.11-16
• /
• 2008

The authors investigated an overhead shuttle (OHS) system for automatic transferring the liquid crystal display (LCD) panels. The constructed tracks of OHS system include the linear and curve regions and have been installed on the ceiling to transfer the cassette of LCD glass along the closed-loop and open-loop tracks. In this study, the OHS system was implemented by a proposed linear motor to solve encoder installation and the system cost problems of the long distance transfer system. In addition, we utilized a new algorithm of the position detection and a new control algorithm for driving linear motor. The newly developed control algorithm was demonstrated from both a computer simulation and an experimentation, indicating that the highly reliable and speedy transfer system can enhance the LCD panel productivity of commercial OHS system.