• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.679-685
• /
• 2004

Although the electrophoretic deposition method has the advantage of simple processing procedure, less fabrication facilities, and easier control for deposition thickness and wire length, providing economical and technical merits, it also has the disadvantages of cracking and porosity phenomena, requiring an improved processing method for higher particle density and constant particle orientation. we have developed an optimization method to increase the particle density and to unify its orientation, and have performed a study to overcome the cracking and porosity problems in the fabricated superconductor. In order to improve the surface uniformity and the conduction properties of the fabricated YBCO thick films, a system that applies alternate voltage vertically has been developed for the first time and applied to the electrophoretic deposition process. The applied alternate electric field caused a force to be exerted on each YBCO particle and resulted in a rotation of the particle in the direction of applied electric field, accomplishing a uniform particle orientation. We name this process as the shaky-aligned electrophoretic deposition method. For commercial utilization and efficiency, in this dissertation, alternating voltage of 60 Hz and 25 ∼ 120 V/cm was proposed to apply it as a subsidiary source for shaky-flow deposition so that the fabricated thin film showed uniform surface morphology with less voids and cracks and Tc,zero of 90 K and the critical current density of 3419 A/$cm^2$.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.9-16
• /
• 2009

While the broadband network and multimedia technology are being developed, the commercial market of digital contents as well as using IPTV has been widely spreading. In this background, Time-Shift system is developed for requirement of multimedia. This system is independent of Time but is not independent of Place and Occasion. For solving these problems, in this paper, we propose the TPO(Time, Place, Occasion)-Shift system for mobile multimedia devices. The profile that can be applied to the mobile multimedia devices is much different from that of the setter-box. And general mobile multimedia devices could not have such large memories that is for multimedia data. So it is important to continuously store and manage those multimedia data in limited capacity with mobile device's profile. Therefore we compose the basket in a way using defined time unit and manage these baskets for effective buffer management. In addition. since the file name of basket is made up to include a basket's time information, we can make use of this time information as DTS(Decoding Time Stamp). When some multimedia content is converted to be available for portable multimedia devices, we are able to compose new formatted contents using such DTS information. Using basket based buffer systems, we can compose the contents by real time in mobile multimedia devices and save some memory. In order to see the system's real-time operation and performance, we implemented the proposed TPO-Shift system on the basis of mobile device, MS340. And setter-box are desisted by using directshow player under Windows Vista environment. As a result, we can find the usefulness and real-time operation of the proposed systems.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.107-107
• /
• 2017

Sweet corns are enjoyed worldwide as processed products and fresh ears. Types of sweet corn are based on the gene(s) involved. The oldest sweet corn type has a gene called "sugary (su)". Sugary-based sweet corn was typically named "sweet corn". With its relatively short shelf life and the discovery of a complementary gene, "sugary enhanced (se)", the sweet corn (su only) was rapidly replaced with another type of sweet corns, sugary enhanced sweet corn, which has recessive homozygous su/su, se/se genotype. With the incorporation of se/se genotype into existing su/su genotype, sugary enhanced sweet corn has better shelf life and increased sweetness while maintaining its creamy texture due to high level of water soluble polysaccharide, phytoglycogen. Super sweet corn as the name implies has higher level of sweetness and better shelf life than sugary enhanced sweet corn due to "shrunken2 (sh2)" gene although there's no creamy texture of su-based sweet corns. Distinction between sh2/sh2 and su/su genotypes in seeds is phenotypically possible. The Involvement of se/se genotype under su/su genotype, however, is visually impossible. The genotype sh2/sh2 is also phenotypically epistatic to su/su genotype when both genotypes are present in an individual, meaning the seed shape for double recessive sh2/sh2 su/su genotype is much the same as sh2/sh2 +/+ genotype. Hence, identifying the double and triple recessive homozygous genotypes from su, se and sh2 genes involves a testcross to single recessive genotype, chemical analysis or DNA-based marker development. For these reasons, sweetcorn breeders were hastened to put them together into one cultivar. This, however, appears to be no longer the case. Sweet corn companies began to sell their sweet corn hybrids with different combinations of abovementioned three genes under a few different trademarks or genetic codes, i.g. Sweet $Breed^{TM}$, Sweet $Gene^{TM}$, Synergistic corn, Augmented Supersweet corn. A total of 49 commercial sweet corn F1 hybrids with B73 as a check were genotyped using DNA-based markers. The genotype of field corn inbred B73 was +/+ +/+ +/+ for su, se and sh2 as expected. All twelve sugary enhanced sweet corn hybrids had the genotype of su/su se/se +/+. Of sixteen synergistic hybrids, thirteen cultivars had su/su se/se sh2/+ genotype while the genotype of two hybrids and the remaining one hybrid was su/su se/+ sh2/+, and su/su +/+ sh2/+, respectively. The synergistic hybrids all were recessive homozygous for su gene and heterozygous for sh2 gene. Among the fifteen augmented supersweet hybrids, only one hybrid was triple recessive homozygous (su/su se/se sh2/sh2). All the other hybrids had su/su se/+ sh2/sh2 for one hybrid, su/su +/+ sh2/sh2 for three hybrids, su/+ se/se sh2/sh2 for three hybrids, su/+ se/+ sh2/sh2 for four hybrids, and su/+ +/+ sh2/sh2 for three hybrids, respectively. What was believed to be a classic super sweet corn hybrids also had various genotypic combination. There were only two hybrids that turned out to be single recessive sh2 homozygous (+/+ +/+ sh2/sh2) while all the other five hybrids could be classified as one of augmented supersweet genotypes. Implication of the results for extension service and sweet corn breeding will be discussed.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.509-523
• /
• 2015

This study introduces newly implemented geological well logs database for Jeju public water wells, built for a research project focusing on integrated hydrogeology database of Jeju Island. A detailed analysis of the existing 1,200 Jeju Island geological logs for the public wells developed since 1970 revealed six major indications to be improved for their use in Jeju geological logs DB construction: (1) lack of uniformity in rock name classification, (2) poor definitions of pyroclastic deposits and sand and gravel layers, (3) lack of well borehole aquifer information, (4) lack of information on well screen installation in many water wells, (5) differences by person in geological logging descriptions. A new Jeju geological logs DB enabling standardized input and output formats has been implemented to overcome the above indications by reestablishing the names of Jeju volcanic and sedimentary rocks and utilizing a commercial, database-based input structured, geological log program. The newly designed database structure in geological log program enables users to store a large number of geology, well drilling, and test data at the standardized DB input structure. Also, well borehole groundwater and aquifer test data can be easily added without modifying the existing database structure. Thus, the newly implemented geological logs DB could be a standardized DB for a large number of Jeju existing public wells and new wells to be developed in the future at Jeju Island. Also, the new geological logs DB will be a basis for ongoing project 'Developing GIS-based integrated interpretation system for Jeju Island hydrogeology'.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.547-551
• /
• 2009

A new commercial rice variety "Chilbo" is a japonica rice (Oryza sativa L.) with resistance to rice stripe virus and high grain quality. It was developed by the rice breeding team of Yeongdeog Substation, NICS, RDA in 2007. This variety was derived from a cross between "Yeongdeog 26" with wind tolerance and lodging resistance and "Koshihikari" with good grain quality. A promising line, YR21324-119-3-2 was selected by a pedigree breeding method and designated as "Yeongdeog 44" in 2004. Regional adaptation yield trials were carried out at eleven locations from 2005 to 2007. As a result, "Yeongdeog 44" was released as a high yielding rice variety with high grain qualilty and virus resistance with the name of "Chilbo". It is short 76cm in culm length and has medium-late growth duration. This variety is resistant to stripe virus and middle resistant to leaf blast disease. It is also tolerant to cold, dried wind. Milled rice kernel of "Chilbo" is translucent, clear in chalkiness. Panel test proved that and it has good eating quality. Head rice ratio of Chilbo is high compared to the check variety, Hwaseongbyeo. Yield potential of "Chilbo" in milled rice is about 5.57MT/ha at ordinary fertilizer level of local adaptability test. This variety would be adaptable to Yeongnam plain, south & east-south coastal, south mid-mountainous, middle plain area of Korean peninsula.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.2
• /
• pp.49-58
• /
• 2019

There have been studies on the satisfaction, preference, and post occupancy evaluation of urban parks in order to reflect users' preferences and activities, suggesting directions for future park planning and management. Despite using questionnaires that are proven to be affective to get users' opinions directly, there haven been limitations in understanding the latest changes in park use through questionnaires. This study seeks to address the possibility of utilizing the thirdgeneration SNS data, Instagram and Google, to compare behavior patterns and trends in park activities. Instagram keywords and photos representing user's feelings with a specific park name were collected. We also examined reviews, peak time, and popular time zones regarding selected parks through Google. This study tries to analyze users' behaviors, emerging activities, and satisfaction using SNS data. The findings are as follows. People using park near residential areas tend to enjoy programs being operated in indoor facilities and to like to use picnic places. In an adjacent park of commercial areas, eating in the park and extended areas beyond the park boundaries is found to be one of the popular park activities. Programs using open spaces and indoor facilities were active as well. Han River Park as a detached park type offers a popular venue for excercises and scenery appreciation. We also identified companionship characteristics of different park types from texts and photos, and extracted keywords of feelings and reviews about parks posted in $3^{rd}$ generation SNS. SNS data can provide basis to grasp behavioral patterns and satisfaction factors, and changes of park activities in real time. SNS data also can be used to set future directions in park planning and management in accordance with new technologies and policies.

• Korea Science and Art Forum
• /
• v.37 no.2
• /
• pp.239-250
• /
• 2019

Along with changes in the industrial structure, revitalizing decrepit or abandoned industrial-age infrastructures are actively under way on a global scale. This study was motivated by an interest in investigating currently idle industrial infrastructures and revitalizing the abandoned passenger ferry terminal in Geoje's Jangseungpo and surrounding areas. The main aims of this study were to examine regional features for the purpose of establishing urban renewal plans and field opinions of the local residents on how to proceed with the restoration of the passenger ferry terminal. To this end, this paper looked into previous case studies of converting decrepit industrial infrastructures into new cultural venues, depending on each region's special circumstances. This paper's findings are as follows: First, as a result of this investigation, the author found that in all cases in Korea and elsewhere revitalization focused on creating modern cultural spaces appropriate for the region while retaining its traditional value. At the same time, they sought sustainable cultural and economic revival. Second, as a result of the investigation on Geoje City's local characteristics, the author found that the surrounding areas' commercial districts were depressed after the terminal's closure. At the time of the investigation, the city government was trying to reopen the terminal as a major port offering multiple international ferry destinations while attracting tourists. Third, as a result of the surveys on the local residents, it was found that more than half of the residents were in agreement with the city government's plan to reopen the terminal and expressed their wishes that they want the terminal to have other uses such as cultural venues. Based on these research results, the author makes proposals, including expanding the passenger ferry terminal and offering cultural spaces within and near the terminal, based on the local residents' opinions and in reflection of local circumstances. As part of this effort, the author also recommends a new brand name and design plan for the new passenger ferry terminal so that Geoje City can improve its local community value.