• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1613-1618
• /
• 2014

Perovskite-type oxides are promising oxygen carriers in producing oxygen-enriched $CO_2$ gas stream for oxyfuel combustion. In this study, a new series of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ (x = 0.2, 0.4, 0.6, 0.8) was prepared and used to produce $O_2/CO_2$ mixture gas. The phase, crystal structure, and morphological properties of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ were investigated through X-ray diffraction, specific surface area measurements, and environmental scanning electron microscopy. The oxygen desorption performance of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ was studied in a fixed-bed reactor system. Results showed that the different x values of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ have no obvious effects on crystalline structure. However, the oxygen desorption performance of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ is improved by Co doping. Moreover, $SrCo_{0.8}Fe_{0.2}O_{3-{\delta}}$ synthesized via a new EDTA method has a larger BET surface area ($40.396m^2/g$), smaller particle size (48.3 nm), and better oxygen production performance compared with that synthesized through a liquid citrate method.

• 한국추진공학회지
• /
• 제24권6호
• /
• pp.10-15
• /
• 2020

본 연구는 동일한 제조법을 가지는 연소촉매 FeOOH와 Fe₂O₃를 제조하여 고체추진제에 적용 후 기계적 물성 및 연소 특성의 변화에 관한 내용이다. 동일한 제조방법을 가지는 FeOOH와 Fe₂O₃를 만들기 위하여 FeOOH를 200, 300, 400, 500℃에서 2시간 동안 소성시킨 후 XRD 결과를 확인하였다. 또한, 제조된 촉매를 고체추진제에 적용 후 기계적 물성 및 연소 특성의 변화를 나타내었다. XRD 결과상으로 FeOOH는 200~300℃사이에서 Geothite에서 Hematite로 결정상이 변화하는 것을 확인하였다. 추진제의 응력은 연소촉매의 소성온도가 높아짐에 따라 변화가 거의 없지만 연신율은 소성을 진행한 촉매를 적용 시 증가하였다. 연소속도는 소성을 하지 않은 FeOOH가 다른 촉매에 비해 약 3~5% 빠르다는 것을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.453-454
• /
• 2008

• 한국안전학회지
• /
• 제7권4호
• /
• pp.7-12
• /
• 1992

The smouldering combustibility of cellulose insulation treated with boric acid-borax-aluminium sulfate as combustion retardants are examined by cigarette ignition method and electrical cardrige heater method. The effectiveness of Aluminium sulfate as a third combustion are acceptable both smouldering resistance and flame resistance at 18% level of all examined formulation. As the proportion of Aluminium sulfate in the formulation was increased, the flame resistance of cellulose insulation was improved.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.3-8
• /
• 2001

LBM은 분자 운동을 직접 모사하지 않고 통계 역학적 원리에 기초하여 주어진 격자 구조 아래서 입자들의 단순 이동, 충돌 과정의 반복에 의해 유동을 모사하는 방법이다. 이미 다양한 열유동 현상들에 대한 응용 결과가 발표되었으며 병렬화, 단순한 프로그래밍 등의 장점으로 인해 앞으로 연소, 다상 유동, micro/nano 스케일 유동 등의 해석에 많은 가능성을 지니고 있다. 아직 국내에서는 이에 대한 소개가 제대로 이루어지지 못해 관련 분야의 연구자들이 충분한 관심을 갖고 있지 않은 것으로 생각되어 본 논문에서 LBM 방법에 대한 개략적인 소개를 시도하였다.

• 한국안전학회지
• /
• 제2권3호
• /
• pp.37-43
• /
• 1987

The combustion process in gas turbine combustor mainly influenced by flow pattern in combustor, and especially the flow pattern near the nozzle and the shape of recirculation zone affect strongly on the flame stabilization, temperature distribution and combustion efficiency in combustor. In this paper, the author has designed and manufactured transparent simplified model combustors on the basis of K. Suzuki's combustor design method to investigate the effects of swirl number and secondary air hold arrays in axial position on the flow characteristics by adopting the tuft method and 5 hole pitot tube.

• 한국산업융합학회 논문집
• /
• 제5권4호
• /
• pp.295-299
• /
• 2002

Specific fuel consumption or specific power output characteristics of an internal combustion engine are likely, in conventional applications, the most important operating criteria. In this work, the test method for the engine performance was introduced in a compression ignition(diesel) engine.

• 약학회지
• /
• 제13권2_3호
• /
• pp.57-61
• /
• 1969

From the principle of CHN-Corder analysis, it is obvious that seperation of chlorine and bromine in a sample is nearly impossible. In order to analyze, chlorine, bromine, and sulfur seperately in a sample which is a single organic compound or a mixture of organic drugs, combination of flask combustion method and CHN-Corder was successfully attempted.

• 한국물환경학회지
• /
• 제32권1호
• /
• pp.98-107
• /
• 2016

This study examined the effects of environmental conditions and the presence of refractory organic matter on oxidation rates of total organic carbon (TOC) measurements based on high temperature combustion and ultraviolet-sulfate methods. Spectroscopic indices for prediction of oxidation rates were also explored using the UV spectra and fluorescence excitation-emission matrix (EEM) of humic acids. Furthermore, optimum TOC instrument conditions were suggested by comparing oxidation rates of a standard TOC material under various conditions. Environmental conditions included salts, reduced ions, and suspended solids. Salts had the greatest influence on oxidation rates in the UV-sulfate method. However, no effect was detected in the high temperature combustion method. The UV-sulfate method showed lower humic substance oxidation rates, refractory natural organic matter, compared to the other methods. TOC oxidation rates for the UV-sulfate method were negatively correlated with higher specific-UV absorbance, humification index, and humic-like EEM peak intensities, suggesting that these spectroscopic indices could be used to predict TOC oxidation rates. TOC signals from instruments using the UV-sulfate method increased with increasing chamber temperature and increasing UV exposure durations. Signals were more sensitive to the former condition, suggesting that chamber temperature is important for improving the TOC oxidation rates of refractory organic matter.

• 한국추진공학회지
• /
• 제22권5호
• /
• pp.49-58
• /
• 2018

본 논문에서 이중연소 램제트엔진의 아음속 흡입구 제어기법 설계에 대한 연구를 소개하였다. 제어기법 설계를 위해 유동조건 및 흡입구 형상에 기초한 흡입구 유동의 동적 응답특성을 조사하고, 흡입구 유동특성을 고려한 제어기법 개념을 설정하였다. 이중연소 램제트 동적 시뮬레이션 모델을 활용하여 시스템 입/출력 선형화 모델을 획득하였으며, 선형화 모델 기반의 선형 제어루프 설계를 수행하였다. 최종적으로, 다양한 제어루프 시뮬레이션을 통해 설계된 제어루프의 안정성을 포함한 제어기법 성능을 평가하였다.