• Wind and Structures
• /
• v.37 no.4
• /
• pp.315-329
• /
• 2023

We investigated the wind characteristics in the near-surface layer during the landfall of Typhoon Mujigae (2015) based on observations from wind towers in the coastal areas of Guandong province. Typhoon Mujigae made landfall in this region from 01:00 UTC to 10:00 UTC on October 4, 2015. In the region influenced by the eyewall of the tropical cyclone, the horizontal wind speed was characterized by a double peak, the wind direction changed by >180°, the vertical wind speed increased by three to four times, and the angle of attack increased significantly to a maximum of 7°, exceeding the recommended values in current design criteria. The vertical wind profile may not conform to a power law distribution in the near-surface layer in the region impacted by the eyewall and spiral rainband. The gust factors were relatively dispersed when the horizontal wind speed was small and tended to a smaller value and became more stable with an increase in the horizontal wind speed. The variation in the gust factors was the combined result of the height, wind direction, and circulation systems of the tropical cyclone. The turbulence intensity and the downwind turbulence energy spectrum both increased notably in the eyewall and spiral rainband and no longer satisfied the assumption of isotropy in the inertial subrange and the -5/3 law. This result was more significant in the eyewall area than in the spiral rainband. These results provide a reference for forecasting tropical cyclones, wind-resistant design, and hazard prevention in coastal areas of China to reduce the damage caused by high winds induced by tropical cyclones.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.106-111
• /
• 2024

A triboelectric nanogenerator is a promising energy harvester operated by the combined mechanism of electrostatic induction and contact electrification. It has attracting attention as eco-friendly and sustainable energy generators by harvesting wasting mechanical energies. However, the power generated in the natural environment is accompanied by low frequencies, so that the output power under such input conditions is normally insufficient amount for a variety of industrial applications. In this study, we introduce a non-contact rotational triboelectric nanogenerator using pedaling and gear systems (called by P-TENG), which has a mechanism that produces high power by using rack gear and pinion gear when a large force by a pedal is given. We design the system can rotate the shaft to which the rotor is connected through the conversion of vertical motion to rotational motion between the rack gear and the pinion gear. Furthermore, the system controls the one directional rotation due to the engagement rotation of the two pinion gears and the one-way needle roller bearing. The TENG with a 2 mm gap between the rotor and the stator produces about the power of 200 ㎼ and turns on 82 LEDs under the condition of 800 rpm. We expect that P-TENG can be used in a variety of applications such as operating portable electronics or sterilizing contaminated water.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.9
• /
• pp.2550-2572
• /
• 2023

Epidemiological survey is an important means for the prevention and control of infectious diseases. Due to the particularity of the epidemic survey, 1) epidemiological survey in epidemic prevention and control has a wide range of people involved, a large number of data collected, strong requirements for information disclosure and high timeliness of data processing; 2) the epidemiological survey data need to be disclosed at different institutions and the use of data has different permission requirements. As a result, it easily causes personal privacy disclosure. Therefore, traditional access control technologies are unsuitable for the privacy protection of epidemiological survey data. In view of these situations, we propose a black box-assisted fine-grained hierarchical access control scheme for epidemiological survey data. Firstly, a black box-assisted multi-attribute authority management mechanism without a trusted center is established to avoid authority deception. Meanwhile, the establishment of a master key-free system not only reduces the storage load but also prevents the risk of master key disclosure. Secondly, a sensitivity classification method is proposed according to the confidentiality degree of the institution to which the data belong and the importance of the data properties to set fine-grained access permission. Thirdly, a hierarchical authorization algorithm combined with data sensitivity and hierarchical attribute-based encryption (ABE) technology is proposed to achieve hierarchical access control of epidemiological survey data. Efficiency analysis and experiments show that the scheme meets the security requirements of privacy protection and key management in epidemiological survey.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.12
• /
• pp.525-534
• /
• 2023

Gas leak detection system is a key to minimize the loss of life due to the explosiveness and toxicity of gas. Most of the leak detection systems detect by gas sensors or thermal imaging cameras. To improve the performance of gas leak detection system using single-modal methods, the paper propose multimodal approach to gas sensor data and thermal camera data in developing a gas type identification model. MultimodalGasData, a multimodal open-dataset, is used to compare the performance of the four models developed through multimodal approach to gas sensors and thermal cameras with existing models. As a result, 1D CNN and GasNet models show the highest performance of 96.3% and 96.4%. The performance of the combined early fusion model of 1D CNN and GasNet reached 99.3%, 3.3% higher than the existing model. We hoped that further damage caused by gas leaks can be minimized through the gas leak detection system proposed in the study.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.279-284
• /
• 2009

Speaker verification determines whether the claimed speaker is accepted based on the score of the test utterance. In recent years, methods based on Gaussian mixture models and universal background model have been the dominant approaches for text-independent speaker verification. These speaker verification systems based on these methods provide very good performance under laboratory conditions. However, in real situations, the performance of speaker verification system is degraded dramatically. For overcoming this performance degradation, the feature recombination method was proposed, but this method had a drawback that whole sub-band feature vectors are used to compute the likelihood scores. To deal with this drawback, a modified feature recombination method which can use each sub-band likelihood score independently was proposed in our previous research. In this paper, we propose a sub-band weighting method based on sub-band signal-to-noise ratio which is combined with previously proposed modified feature recombination. This proposed method reduces errors by 28% compared with the conventional feature recombination method.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.2
• /
• pp.105-114
• /
• 2024

Clinical laboratories endeavor to secure quality by establishing effective quality management systems. However, laboratory environments are complex, and single quality control procedures may inadequately detect many errors. Patient-based real-time quality control (PBRTQC) is a laboratory tool that monitors the testing process using algorithms such as Bull's algorithm and several variables, such as average of normal, moving median, moving average, and exponentially weighted moving average. PBRTQC has many advantages over conventional quality control, including low cost, commutability, continuous real-time performance monitoring, and sensitivity to pre-analytical errors. However, PBRTQC is not easily implemented as it requires statistical algorithm selection, the design of appropriate rules and protocols, and performance verification. This review describes the basic concepts, methods, and procedures of PBRTQC and presents guidelines for implementing a patient-based quality management system. Furthermore, we propose the combined use of PBRTQC when the performance of internal quality control is limited. However, clinical evaluations were not conducted during this review, and thus, future evaluation is required.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.1
• /
• pp.170-191
• /
• 2024

The transmission of confidential data using cover media is called steganography. The three requirements of any effective steganography system are high embedding capacity, security, and imperceptibility. The text file's structure, which makes syntax and grammar more visually obvious than in other media, contributes to its poor imperceptibility. Text steganography is regarded as the most challenging carrier to hide secret data because of its insufficient redundant data compared to other digital objects. Unicode characters, especially non-printing or invisible, are employed for hiding data by mapping a specific amount of secret data bits in each character and inserting the character into cover text spaces. These characters are known with limited spaces to embed secret data. Current studies that used Unicode characters in text steganography focused on increasing the data hiding capacity with insufficient redundant data in a text file. A sequential embedding pattern is often selected and included in all available positions in the cover text. This embedding pattern negatively affects the text steganography system's imperceptibility and security. Thus, this study attempts to solve these limitations using the Part-of-speech (POS) tagging technique combined with the randomization concept in data hiding. Combining these two techniques allows inserting the Unicode characters in randomized patterns with specific positions in the cover text to increase data hiding capacity with minimum effects on imperceptibility and security. Format-preserving encryption (FPE) is also used to encrypt a secret message without changing its size before the embedding processes. By comparing the proposed technique to already existing ones, the results demonstrate that it fulfils the cover file's capacity, imperceptibility, and security requirements.

• Tribology and Lubricants
• /
• v.40 no.1
• /
• pp.17-23
• /
• 2024

This study analyzes the thermal effects on the performance of an air foil thrust bearing (AFTB) using COMSOL Multiphysics to approximate actual bearing behavior under real conditions. An AFTB is a sliding-thrust bearing that uses air as a lubricant to support the axial load. The AFTB consists of top and bump foils and supports the rotating disk through the hydrodynamic pressure generated by the wedge effect from the inclined surface of the top foil and the elastic deformation of the bump foils, similar to a spring. The use of air as a lubricant has some advantages such as low friction loss and less heat generation, enabling air bearings to be widely used in high-speed rotating systems. However, even in AFTB, the effects of energy loss due to viscosity at high speeds, interface frictional heat, and thermal deformation of the foil caused by temperature increase cannot be ignored. Foil deformation derived from the thermal effect influences the minimum decay in film thickness and enhances the film pressure. For these reasons, performance analyses of isothermal AFTBs have shown few discrepancies with real bearing behavior. To account for this phenomenon, a thermal-fluid-structure analysis is conducted to describe the combined mechanics. Results show that the load capacity under the thermal effect is slightly higher than that obtained from isothermal analysis. In addition, the push and pull effects on the top foil and bump foil-free edges can be simulated. The differences between the isothermal and thermal behaviors are discussed.

• Smart Structures and Systems
• /
• v.33 no.2
• /
• pp.145-163
• /
• 2024

The evaluation of dynamic characteristics of bridges under operational traffic loads is a crucial aspect of bridge structural health monitoring. In the vehicle-bridge interaction (VBI) system, the vibration responses of bridge exhibit time-varying characteristics. To address this issue, an accurate time-frequency analysis method that combines the autoregressive power spectrum based empirical wavelet transform (AR-EWT) and local maximum synchrosqueezing transform (LMSST) is proposed to identify the time-varying instantaneous frequencies (IFs) of the bridge in the VBI system. The AR-EWT method decomposes the vibration response of the bridge into mono-component signals. Then, LMSST is employed to identify the IFs of each mono-component signal. The AR-EWT combined with the LMSST method (AR-EWT+LMSST) can resolve the problem that LMSST cannot effectively identify the multi-component signals with weak amplitude components. The proposed AR-EWT+LMSST method is compared with some advanced time-frequency analysis techniques such as synchrosqueezing transform (SST), synchroextracting transform (SET), and LMSST. The results demonstrate that the proposed AR-EWT+LMSST method can improve the accuracy of identified IFs. The effectiveness and applicability of the proposed method are validated through a multi-component signal, a VBI numerical model with a four-degree-of-freedom half-car, and a VBI model experiment. The effect of vehicle characteristics, vehicle speed, and road surface roughness on the identified IFs of bridge are investigated.

• Ocean Systems Engineering
• /
• v.14 no.1
• /
• pp.85-99
• /
• 2024

Ocean surface currents have an essential role in the Earth's climate system and significantly impact the marine ecosystem, weather patterns, and human activities. However, predicting ocean surface currents remains challenging due to the complexity and variability of the oceanic processes involved. This review article provides an overview of the current research status, challenges, and opportunities in the prediction of ocean surface currents. We discuss the various observational and modelling approaches used to study ocean surface currents, including satellite remote sensing, in situ measurements, and numerical models. We also highlight the major challenges facing the prediction of ocean surface currents, such as data assimilation, model-observation integration, and the representation of sub-grid scale processes. In this article, we suggest that future research should focus on developing advanced modeling techniques, such as machine learning, and the integration of multiple observational platforms to improve the accuracy and skill of ocean surface current predictions. We also emphasize the need to address the limitations of observing instruments, such as delays in receiving data, versioning errors, missing data, and undocumented data processing techniques. Improving data availability and quality will be essential for enhancing the accuracy of predictions. The future research should focus on developing methods for effective bias correction, a series of data preprocessing procedures, and utilizing combined models and xAI models to incorporate data from various sources. Advancements in predicting ocean surface currents will benefit various applications such as maritime operations, climate studies, and ecosystem management.