• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.446-449
• /
• 2005

Two single-magnetron heating systems (SM-HS), each with a helical glass heat exchanger and a cylindrical cavity, were combined to make a two-magnetron-in-series heating system (2MS-HS) in order to increase the heating capacity. A comparison using water showed that the heating performance of the 2MS-HS was increased by two-fold as compared to that of the SM-HS, resulting in energy saving of 7.0% in 2MS-HS. Pasteurization test of 2MS-HS conducted with model food (LB broth contaminated with Bacillus subtilis) showed two-fold higher treatment capacity compared to SM-HS. Relationships between outlet temperature of the processed food, flow rate, and residence time in the 2MS-HS were established for water. Optimum pasteurization capacity was 17 s, $73^{\circ}C$, at flow rate of 280 ml/min. The 2MS-HS could be applied to the small-scale pasteurization of liquid food.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2148-2153
• /
• 2007

The electricity conversion-efficiency of solar cell for commercial application is about 6-15%. More than 85% of the incoming solar energy is either reflected or absorbed as heat energy. Consequently, the working temperature of the photovoltaic cells increases considerably after prolonged operations and the cell's efficiency drops significantly. PV/T refers to the integration of a PV module and a solar thermal collector in a single piece of equipment. By cooling the PV module with a fluid steam like air or water, the electricity yield can be improved. At the same time, the heat pick-up by the fluid can be to support space heating or service hot-water systems. In this study, a pulsating heat pipe solar heat collector was combined with single-crystal silicon photovoltaic cell in hybrid energy-generating unit that simultaneously produced low temperature heat and heat and electricity. This experiment was investigating thermal and electrical efficiency for evaluation of a PV/T system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.61-64
• /
• 2004

This study is to investigate the engineering and shrinkage properties of concrete incorporating shrinkage reducing agent(SRA) and expansive additive(EA) in order to reduce shrinkage of concrete. According to results, as for the properties of fresh concrete, increase in, SRA and EA content leads to reduce the fluidity but to increase the air content, and as for setting time, there is little difference. For strength properties, it decreased with an increase in SRA dosage and increased up to 5% of EA content. For the properties of drying shrinkage, it shows decline tendency with an increase in SRA and EA content reiteratively. It alto reduces significantly with the combination of SRA-EA systems due to the combined effect of the admixture. In the scope of this paper, it is found that the use of SRA with 0.5％ and EA with 5% has optimum effects on the various properties of concrete. And under the combination of SRA and EA, it can reduce drying shrinkage about 37%.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2299-2308
• /
• 1997

While most machine learning research has been primarily concerned with the development of systems that implement one type of learning strategy, we use a multistrategy approach which integrates rule induction learning and instance-based learning, and show how this marriage allows for overall better performance. In the rule induction learning phase, we derive an entropy function, based on Hellinger divergence, which can measure the amount of information each inductive rule contains, and show how well the Hellinger divergence measures the importance of each rule. We also propose some heuristics to reduce the computational complexity by analyzing the characteristics of the Hellinger measure. In the instance-based learning phase, we improve the current instance-based learning method in a number of ways. The system has been implemented and tested on a number of well-known machine learning data sets. The performance of the system has been compared with that of other classification learning technique.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.56-60
• /
• 2005

To calculate the probability of bit error of UWB communication systems, the exact expression of multiple access interference is essential. So far, in many researches, MAI has been modeled by the Gaussian Approximation, which leads to the huge errors. And there are some tries to obtain the exact model fot the MAI but they have some problems such as long calculation time. We introduce the simple expression to calculate the probability of error of an UWB-TH system with BPSK. The multiple access interference is explained by the characteristic function method combined with the Gaussian approximation. It allows us to easily and fast calculate the bit error rate of an UWB-TH system.

• Structural Engineering and Mechanics
• /
• v.30 no.3
• /
• pp.263-278
• /
• 2008

Structural pipe-in-pipe cross-sections have significant potential for application in offshore oil and gas production systems because of their property that combines insulation performance with structural strength in an integrated way. Such cross-sections comprise inner and outer thin walled pipes with the annulus between them fully filled by a selectable thick filler material to impart an appropriate combination of properties. Structural pipe-in-pipe cross-sections can exhibit several different collapse mechanisms and the basis of the preferential occurrence of one over others is of interest. This paper presents an elastic analyses of a structural pipe-in-pipe cross-section when subjected to external hydrostatic pressure. It formulates and solves the static and elastic buckling problem using the variational principle of minimum potential energy. The paper also investigates a simplified formulation of the problem where the outer pipe and its contact with the filler material is considered as a 'pipe on an elastic foundation'. Results are presented to show the variation of elastic buckling pressure with the relative elastic modulus of the filler and pipe materials, the filler thickness and the thicknesses of the inner and outer pipes. The range of applicability of the simplified 'pipe on an elastic foundation' analysis is also presented. A brief review of the types of materials that could be used as the filler is combined with the results of the analysis to draw conclusions about elastic buckling behaviour of structural pipe-in-pipe cross-sections.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2626-2646
• /
• 2014

This study presents a power and Physical Resource Blocks (PRBs) joint allocation algorithm to coordinate uplink (UL) interference in the device-to-device (D2D) underlaying Long Term Evolution-Advanced (LTE-A) networks. The objective is to find a mechanism to mitigate the UL interference between the two subsystems and maximize the weighted sum throughput as well. This optimization problem is formulated as a mixed integer nonlinear programming (MINLP) which is further decomposed into PRBs assignment and transmission power allocation. Specifically, the scenario of applying imperfect channel state information (CSI) is also taken into account in our study. Analysis reveals that the proposed PRBs allocation strategy is energy efficient and it suppresses the interference not only suffered by the LTE-A system but also to the D2D users. In another side, a low-complexity technique is proposed to obtain the optimal power allocation which resides in one of at most three feasible power vectors. Simulations show that the optimal power allocation combined with the proposed PRBs assignment achieves a higher weighted sum throughput as compared to traditional algorithms even when imperfect CSI is utilized.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.159-169
• /
• 2012

One of critical issues in the housing area is what strategies should be adopted for revitalizing contemporary communities in housing complex. It is expected that those strategies could encourage neighbourship and recover the existing community spaces. Based on the assumption that contemporary communities might have different characteristics from those of the traditional communities and spaces, this research aims to explore the possibility of new communities in a current context. With the development of the information communication technologies (ICT) and hardware systems, the environment would be capable of anticipating people's needs and then provide them with customization options to tailor the environment to their requirements. By incorporating the 'smart' paradigm, this paper introduces the concept of a smart community and space with the potential of mobile Augmented Reality(AR) as alternative strategies for activating the communities. The residents believe that existing common spaces need to be extendable and augmented by combining new technologies. The smart communities and spaces are expected to extend people's interaction to virtual world in aj real context, further combined with social network, it enables sustainable relationships among residents, contributina to a new type of community.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.560-563
• /
• 2012

Hardware and software of optical network monitoring system for optical network installed in ship for providing massive information are designed and fabricated. And, we investigated whether the fabricated system will accurately monitoring three events of optical cable extension, macrobanding and ferrule dust, which are related with special situation of ship, or not through the experiment. We used the combined method of chained branch and dark fiber for designing and fabricating hardware of optical network monitoring system for optimal corresponding with network configuration in ship. And, we confirmed that the proposed system excellently trace within 5 m range of event point in all three cases by investigating each event experiments.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.113.1-113.1
• /
• 2010

IGCC(Integrated Coal Gasification and Combined Cycle) plants can be among the most advanced and environmental systems for electric energy generation from various feed stocks and is becoming more and more popular in new power generation fields. In this work, the performance of IGCC plants employing Shell gasification technology and a GE 7FB gas turbine engine was simulated using IPSEpro open-equation modeling environment for different operating conditions. Performance analyses and comparisons of all operating cases were performed based on the design cases. Discussions were focused on gas composition, syngas production rate and overall performance. The validation of key steady-state performance values calculated from the process models were compared with values from the provided heat and material balances for Shell coal gasification technology. The key values included in the validation included the inlet coal flow rate; the mass flow rate, heating value, and composition of major gas species (CO, H2, CH4, H2O, CO2, H2S, N2, Ar) for the syngas exiting the gasifier island; and the HP and MP steam flows exiting the gasifier island.