• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.83-91
• /
• 2011

The purpose of this thesis was to implement effective blended PBL(Problem-Based Learning) systems for information communication ethics education. Online learning and face-to-face classes were systematically combined for achieving the teaching-learning goals. And the main module for online learning run on Moodle, an open source learning management system. To examine educational effectiveness of the proposed systems, an experimental study was conducted through the method to the subject of two class in the second-grade of university located in ${\bigcirc}{\bigcirc}$ city. For experiment 60 students(treatment group=30, control group=30) are participated. And they were assigned to one of ten subgroups, comprising of six students, respectively. The results of this study are follows, First, the education using proposed blended PBL method is more effective in cultivating consciousness of information communication ethics than the education using face-to-face PBL learning method. Second, learners who participated in the proposed blended PBL more experienced various effects of PBL, such as (1) Improvement of problem solving ability, (2) Understanding of cooperative learning than the other learners who participated in the face-to-face PBL.

• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.34-41
• /
• 1996

The heat of evaporation (cold energy) of LNG is the energy consumed in the production of LNG. This energy amounts to 14% of the NG. In Pyungtak LNG terminal, it is about 96 MW in 1993. In order to utilize the cold energy, the cold power generation systems are investigated: The Rankine cycle using the low temperature energy, the partial expansion cycle using the pressure energy, and the Linde process which is a combined cycle of the Rankine and the partial direct expansion cycle. The commercial simulator, ASPEN Plus, is used. The conceptual design data are obtained from the current facilities of the Pyungtak LNG terminal. The performances of three systems are evaluated. The amount of electric power ranges iron 3 MW to 6MW. The optimum energy efficiency is about 37%. The optimum design conditions are obtained for the partial direct expansion (PDE) cycle. The performance of the PDE cycle is supposed to be comparable to that of the Rankine cycle if the areas of the total heat exchanger of the both cycle are equal.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1124-1130
• /
• 2015

Moisture and high temperature are the most important factors that lead to the ageing of oil-paper insulation, but the research about space charge characteristics of oil-paper insulation does not take the combined effect of ambient temperature, moisture and thermal ageing into account. The pulsed electroacoustic (PEA) method was used to investigate the influence of moisture and temperature on space charge characteristics of oil paper at different ageing stages. The results showed that moisture could speed up formation of space charge in oil paper when water concentration was low, but the formation was restrained if the water concentration was high. At the beginning of thermal ageing, heterogeneous charge accumulation had predominance, but it gradually changed to homogeneous charge injection with ageing. It was believed that moisture concentration could speed up ageing and enhance charge accumulation on one hand, and accelerate or slow down the establishment speed of space charge on the other hand, therefore, charge accumulation type changed with ageing. The more seriously the oil-paper insulation was thermally aged, the deeper the trap energy level was, hence more space charge was trapped, which could be speeded up by increasing the ageing temperature, but the effect of ambient temperature did not fit the Arrhenius law.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.931-943
• /
• 2018

Wireless power transfer (WPT) technology has been the focus of a lot of research due to its safety and convenience. The Z-source inverter (ZSI) was introduced into WPT systems to realize improved system performance. The ZSI regulates the dc-rail voltage in WPT systems without front-end converters and makes the inverter bridge immune to shoot-through states. However, when the WPT system is combined with a ZSI, the system parameters must be configured to prevent the ZSI from entering an "accidental shoot-through" (AST) state. This state can increase the THD and decrease system power and efficiency. This paper presents a mathematical analysis for the characteristics of a WPT system and a ZSI while addressing the causes of the AST state. To deal with this issue, the impact of the system parameters on the output are analyzed under two control algorithms and the primary compensation capacitance range is derived in detail. To validate the analysis, both simulations and experiments are carried out and the obtained results are presented.

• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.9-14
• /
• 2011

To determine whether pattern recognition based on metabolite fingerprinting for whole cell extracts can be used to discriminate cultivars metabolically, leaves of nine commercial Orostachys plants were subjected to Fourier transform infrared spectroscopy (FT-IR). FT-IR spectral data from leaves were analyzed by principal component analysis (PCA) and Partial least square discriminant analysis (PLS-DA). The dendrogram based on hierarchical clustering analysis of these PLS-DA data separated the nine Orostachys species into five major groups. The first group consisted of O. iwarenge 'Yimge', 'Jeju', 'Jeongsun' and O. margaritifolius 'Jinju' whereas in the second group, 'Sacheon' was clustered with 'Busan,' both of which belong to O. malacophylla species. However, 'Samchuk', belong to O. malacophylla was not clustered with the other O. malacophylla species. In addition, O. minuta and O. japonica were separated to the other Orostachys plants. Thus we suggested that the hierarchical dendrogram based on PLS-DA of FT-IR spectral data from leaves represented the most probable chemotaxonomical relationship between commercial Orostachys plants. Furthermore these metabolic discrimination systems could be applied for reestablishment of precise taxonomic classification of commercial Orostachys plants.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.491-497
• /
• 2014

PURPOSE. This study evaluated the influence of abutment materials on the stability of the implant-abutment joint in internal conical connection type implant systems. MATERIALS AND METHODS. Internal conical connection type implants, cement-retained abutments, and tungsten carbide-coated abutment screws were used. The abutments were fabricated with commercially pure grade 3 titanium (group T3), commercially pure grade 4 titanium (group T4), or Ti-6Al-4V (group TA) (n=5, each). In order to assess the amount of settlement after abutment fixation, a 30-Ncm tightening torque was applied, then the change in length before and after tightening the abutment screw was measured, and the preload exerted was recorded. The compressive bending strength was measured under the ISO14801 conditions. In order to determine whether there were significant changes in settlement, preload, and compressive bending strength before and after abutment fixation depending on abutment materials, one-way ANOVA and Tukey's HSD post-hoc test was performed. RESULTS. Group TA exhibited the smallest mean change in the combined length of the implant and abutment before and after fixation, and no difference was observed between groups T3 and T4 (P>.05). Group TA exhibited the highest preload and compressive bending strength values, followed by T4, then T3 (P<.001). CONCLUSION. The abutment material can influence the stability of the interface in internal conical connection type implant systems. The strength of the abutment material was inversely correlated with settlement, and positively correlated with compressive bending strength. Preload was inversely proportional to the frictional coefficient of the abutment material.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.469-477
• /
• 2007

Most multimedia source coders exhibit unequal bit error sensitivity. Efficient transmission system design should therefore incorporate the use of matching unequal error protection (UEP). In this paper, we present and evaluate a flexible space-time coding system with unequal error protection. Multiple transmit and receive antennas and bit-interleaved coded modulation techniques are used combined with rate compatible punctured convolutional codes. A near optimum iterative receiver is employed with a multiple-in multiple-out inverse mapper and a MAP decoder as component decoders. We illustrate how the UEP system gain can be achieved either as a power or bandwidth gain compared to the equal error protection system (EEP) for the identical source and equal overall quality for both the UEP and EEP systems. An example with two/three transmit and two receive antennas using BPSK modulation is given for the block fading channel.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.818-823
• /
• 2016

Millimeter wave (mm-wave) communication systems provide high data rates owing to the large bandwidths available at mm-wave frequencies. Recently, analogue and digital combined beamforming, namely "hybrid beamforming" has drawn attentions owing to its ability to realize the required link margins in mm-wave systems. Taking into account the radio frequency (RF) hardware limitations, such as the analogue phase shifter gain constraint and the low resolution of the phase controller, we introduce an uplink hybrid beamforming system that includes discrete Fourier transform (DFT) based "fixed" analogue beamforming. We adopt a zero-forcing (ZF) multiple-input multiple-output (MIMO) equalizer to eliminate the uplink inter-user interferences. Moreover, to improve the sum-rate performances, we propose a transmit beam selection algorithm which makes the uplink effective channels, i.e., the beamformed channels, become near orthogonal. The effectiveness of the proposed beam selection algorithm was verified through numerical simulations.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.174-186
• /
• 1991

There exist many frame structural systems which may be regarded as a combined structural system composed of beam/bar elements and attachments reducible to damped spring-mass systems. In this paper, analytical methods based on the receptance for the vibration analysis of such a system are presented. For the free vibration analysis and response calculations to point excitations, receptances of a uniform Timoshenko beam and a bar are derived in closed and spectral forms, and the method to obtain the system receptance by synthesizing the receptances of the elements and other subsystems is presented. The system damping property is also obtainable by sysnthesizing the components' damping properties. For calculations of the system responses to support motion, the Support Displacement Transfer Ratio(SDTR) of a uniform Timoshenko beam and a bar conceptually similar to the receptance is defined, and the method of synthesizing them with other subsystems' receptances is also presented. Such a method is very convenient especially in dynamic reanalysis subject to changes of some design variables.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.4
• /
• pp.330-343
• /
• 2016

This paper presents results of an experimental investigation of vortex-induced vibration (VIV) of a flexibly mounted and rigid cylinder with two-degrees-of-freedom with respect to varying ratio of in-line natural frequency to cross-flow natural frequency, $f^*$, at a fixed low mass ratio. Combined in-line and cross-flow motion was observed in a sub-critical Reynolds number range. Three-dimensional displacement meter and tension meter were used to measure dynamic responses of the model. To validate the results and the experiment system, x and y response amplitudes and ratio of oscillation frequency to cross-flow natural frequency were compared with other experimental results. It has been found that the higher harmonics, such as third and more vibration components, can occur on a certain part of steel catenary riser under a condition of dual resonance mode. In the present work, however, due to the limitation of a size of circulating water channel, the whole test of a whole configuration of the riser at an adequate scale for VIV phenomenon was not able to be conducted. Instead, we have modeled a rigid cylinder and assumed that the cylinder is a part of steel catenary riser where the higher harmonic motions could occur. Through the experiment, we have found that even though the cylinder was assumed to be rigid, the occurrence of the higher harmonic motions was observed in a small reduced velocity ($V_r$) range, where the influence of the in-line response is relatively large. The transition of the vortex shedding mode from one to another was examined by using time history of x and y directional displacement over all experimental cases. We also observed the influence of in-line restoring force power spectral density with $f^*$.