• Journal of Surface Science and Engineering
• /
• v.50 no.1
• /
• pp.1-9
• /
• 2017

Design of novel materials in renewable energy systems plays a key role in powering transportation vehicles and portable electronics. This review introduces the research work of first principles-based computational design for the materials over the last decade to accomplish the goal with less financial and temporal cost beyond the conventional approach, especially, focusing on electrocatalyst toward a proton exchange membrane fuel cell (PEMFC). It is proposed that the new method combined with experimental validation, can provide fundamental descriptors and mechanical understanding for optimal efficiency control of a whole system. Advancing these methods can even realize a computational platform of the materials genome, which can substantially reduce the time period from discovery to commercialization into markets of new materials.

• Science of Emotion and Sensibility
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2005

This paper reports several emotion detecting methods based on various attributes of human voice. These methods have been developed at our Engineering Systems Laboratory. It is noted that, in all of the proposed methods, only prosodic information in voice is used for emotion recognition and semantic information in voice is not used. Different types of neural networks(NNs) are used for detection depending on the type of voice parameters. Earlier approaches separately used linear prediction coefficients(LPCs) and time series data of pitch but they were combined in later studies. The proposed methods are explained first and then evaluation experiments of individual methods and their performances in emotion detection are presented and compared.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.628-646
• /
• 2016

This paper proposes a novel channel assignment scheme that is based on finite projective plane (FPP) theory. The proposed scheme involves using a Markov chain model to allocate N channels to N users through intermixed channel group arrangements, particularly when channel resources are idle because of inefficient use. The intermixed FPP-based channel group arrangements successfully related Markov chain modeling to punch through ratio formulations proposed in this study, ensuring fair resource use among users. The simulation results for the proposed FPP scheme clearly revealed that the defined throughput increased, particularly under light traffic load conditions. Nevertheless, if the proposed scheme is combined with successive interference cancellation techniques, considerably higher throughput is predicted, even under heavy traffic load conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.4137-4152
• /
• 2014

This paper investigates the description ability of chaotic feature vector to dynamic textures. First a chaotic feature and other features are calculated from each pixel intensity series. Then these features are combined to a chaotic feature vector. Therefore a video is modeled as a feature vector matrix. Next by the aid of bag of words framework, we explore the representation ability of the proposed chaotic feature vector. Finally we investigate recognition rate between different combinations of chaotic features. Experimental results show the merit of chaotic feature vector for pixel intensity series representation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.6
• /
• pp.1964-1981
• /
• 2014

An improved Mean-Shift (MS) tracker called joint CB-LBWH, which uses a combined weighted-histogram scheme of CBWH (Corrected Background-Weighted Histogram) and LBWH (likelihood-based Background-Weighted Histogram), is presented. Joint CB-LBWH is based on the notion that target representation employs both feature saliency and confidence to form a compound weighted histogram criterion. As the more prominent and confident features mean more significant for tracking the target, the tuned histogram by joint CB-LBWH can reduce the interference of background in target localization effectively. Comparative experimental results show that the proposed joint CB-LBWH scheme can significantly improve the efficiency and robustness of MS tracker when heavy occlusions and complex scenes exist.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.569-578
• /
• 2002

This paper proposes a new multicarrier code division multiple access (CDMA) system. The proposed multicarrier CDMA system provides the advantages that the transmission bandwidth is more efficiently utilized by using divided spreading sequence, time and frequency diversity is achieved in frequency selective nultipath (acting channel, and inter-carrier interference (ICI) can be minimized by using specific data and code pattern. In this system, transmitted data bits are serial-to-parallel converted to some parallel branches. On each branch each bit is direct-sequence spread-spectrum modulated by divided spreading sequences and transmitted using orthogonal carriers. The receiver providers a Rake for each carrier, and the outputs of Rakes are combined to get time and frequency diversity. This multicarrier CDMA system allows additional flexibility in the choice of system parameters. Upon varying system parameters, bit error rate (BER) performance is examined for the proposed multicarrier CDMA system. Simulation results show that the proposed multicarrier CDMA scheme can achieve better performance than the other types of conventional multicarrier CDMA systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1590-1598
• /
• 1997

The paper first introduces the new concept of potential diversity and signal decomposability, which establish a foundaton to generalize the existing concepts of path and frequency diversities. Then it presents a new DS/CDMA system called chip-spreading OCDM system, which is an embodiment of the petential diversity concept that combines the path diversity of the DS/CDMA system and the frequency diversity of the OFDM/CDMA system. In the chip-spreading OCDM system the chip sequences in each symbol interval are first converted into aralled streams, which then simultaneously modulate different orthogonal Walsh basis functions. In the receiver, the received signal is matched to each extended basis-function which is the union of the transmitter basis-functions and their delayed replicas, and the matched-filtered chip samples are combined together after individual channel compensation. The conventional DS/CDMA system using the maximal ratio combining. In addition, it effectively resolves the high PAR and high sensitivity to frequency offset problems which are critical in multi-carrier systems.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.241-246
• /
• 2015

In this paper, we consider a relaying system which employs a single relay in a wireless network with distributed sources and destinations. Here, all source, destination, and relay nodes are equipped with multiple antennas. For amplify-and-forward relay systems, we confirm the achievable sum rate through a joint multiple source precoders and a single relay filter design. To this end, we propose a new linear processing scheme in terms of maximizing the sum rate performance by applying a blockwise relaying method combined with geometric programming techniques. By allowing the global channel knowledge at the source nodes, we show that this joint design problem is formulated as a standard geometric program, which can guarantees a global optimal value under the modified sum rate criterion. Simulation results show that the proposed blockwise relaying scheme with the joint power allocation method provides substantial sum rate gain compared to the conventional schemes.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.239-242
• /
• 2001

This paper presents a windows program package for solving security constrained OPF in interconnected power systems, which is based on the combined application of evolutionary programming(EP) and sequential quadratic programming(SQP). The objective functions are the minimization of generation fuel costs and system power losses. The control variables are the active power of the generating units, the voltage magnitude of the generator, transformer tap settings and SVC setting. The state variables are the bus voltage magnitude, the reactive power of the generating unit, line flows and the tie line flow. In OPF considering security, the outages are selected by contingency ranking method. The resulting optimal operating point has to be feasible after outages such as any single line outage(respect of voltage magnitude, reactive power generation and power flow limits). The OPF package proposed is applied to 10 machines 39 buses model system.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2120-2122
• /
• 2002

There are several types of control systems that use fuzzy logic controller as a essential system component. The majority of research work on fuzzy PID controller focuses on the conventional two-input PI or PD type controller. However, fuzzy PID controller design is a complex task due to the involvement of a large number of parameters in defining the fuzzy rule base. In this paper we combined conventional PI type and PD type fuzzy controller and set the initial parameters of this controller from the conventional PID controller gains obtained by Ziegler-Nichols tuning or other coarse tuning methods. After that, by replacing some of these parameters with sing1e neurons and making them to be adjusted by back-propagation learning algorithm we designed a neuro-fuzzy controller which showed good performance characteristics in both computer simulation and actual application.