• 제목/요약/키워드: combined protection

검색결과 379건 처리시간 0.027초

MIMO-OFDM 시스템을 위한 효율적인 UEP 전송기법 제안 (An Efficient UEP Transmission Scheme for MIMO-OFDM Systems)

  • 이흔철;이병시;;이인규
    • 한국통신학회논문지
    • /
    • 제32권5C호
    • /
    • pp.469-477
    • /
    • 2007
  • 소스 코딩을 통해 얻어지는 대다수의 멀티미디어 데이터 정보는 여러 등급의 다른 비트에러민감도를 가지고 있다. 그러므로 효율적인 시스템 구현을 위해서는 데이터 고유의 비트에러민감도에 따라 서로 다른 수준의 에러 방지를 제공해야 한다. 이 논문에서는 다중안테나 (multiple-in multiple-out : MIMO) 기반의 OFDM시스템에서 효과적인 멀티미디어 정보를 전송하기 위한 차등 에러 방지 기법(Unequal error protection : UEP)을 제안한다. 차등의 에러 방지를 제공하는 시공간 코딩 기법을 설명하고 그 성능을 평가한다. MIMO 기법과 BICM (Bit-interleaved coded modulations) 기술은 보통 RCPC (Rate compatible punctured convolutional codes) 기법과 연계되어 구동된다. 이때 다중안테나 채널 이퀄라이저와 채널코딩 사이에 터보디코딩 기법을 적용하여 최상의 성능을 얻을 수 있는데 기존의 시스템에서는 동일한 에러방지기법(Equal Error Protection : EEP)을 사용하고 있다. 이 논문에서는 이런 시스템 구조에서 보통 사용되는 동일 에러 방지 기법(EEP)와 비교하여 차등 에러방지 기법(UEP)를 사용함으로써 얻을 수 있는 이득을 사용되는 전송파워와 채널밴드 측면에서 설명한다. 특히 제안된 알고리즘을 둘 또는 세 개의 전송 안테나와 두 개의 수신안테나를 갖는 다중안테나 시스템에 적용하고 8PSK 신호를 이용하여 플랫 페이딩 채널에서 성능을 평가하였다.

RCD와 SPD의 접속 위치에 따른 보호협조 (Protection Coordination Associated with Connection Location of Residual Current Devices and Surge Protective Devices)

  • 이복희;박희열;신건진;배관영;류춘형;이강희
    • 조명전기설비학회논문지
    • /
    • 제27권3호
    • /
    • pp.100-106
    • /
    • 2013
  • In this paper, in order to analyze lightning impulse response characteristics in combined installations of SPDs and RCDs, surge protection coordination between SPDs and RCDs are experimentally investigated by using the combination wave generator. Six different types of single-phase residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBOs) being present on the domestic market are tested according to KS C IEC 61009-1 standard. As a result, when a class I SPD is located on the source side of an RCBO, all kinds of specimens are able to provide the proper coordination between the SPD and RCBOs without nuisance tripping, unintended operation or damage due to test impulse currents. However, in the case that the class II SPD is located on the load side of RCBOs, a lot of L-N mode injected currents is split into the RCBO, and a few RCBOs are damaged. Coordination between SPDs and RCDs is not valid and a role of SPDs is of no use. When combining SPDs with RCDs, it is necessary to select SPDs and RCDs in consideration of the protection voltage level of metal oxide varistor embedded in RCDs.

해상풍력발전기 직격뢰 보호용 1등급 바리스터 개발 (Development of class I surge protection device for the protection of offshore wind turbines from direct lightning)

  • 이건희;박재현;정경진;강성만;최승규;우정민
    • 풍력에너지저널
    • /
    • 제14권4호
    • /
    • pp.50-56
    • /
    • 2023
  • With the abnormal weather phenomena caused by global warming, the frequency and intensity of lightning strikes are increasing, and lightning accidents are becoming one of the biggest causes of failures and accidents in offshore wind turbines. In order to secure generator operation reliability, effective and practical measures are needed to reduce lightning damage. Because offshore wind turbines are tall structures installed at sea, the possibility of direct lightning strikes is very high compared to other structures, and the role of surge protection devices to minimize damage to the electrical and electronic circuits inside the wind turbine is very important. In this study, a varistor, which is a key element for a class 1 surge protection device for direct lightning protection, was developed. The current density was improved by changing the varistor composition, and the distance between the electrode located on the varistor surface and the edge of the varistor was optimized through a simulation program to improve the fabrication process. Considering the combined effects of heat distribution, electric field distribution, and current density on the optimized varistor surface, silver electrodes were formed with a gap of 0.5 mm. The varistor developed in this study was confirmed to have an energy tolerance of 10/350 ㎲, 50kA, which is a representative direct lightning current waveform, and good protection characteristics with a limiting voltage of 2 kV or less.

온라인 맞춤형 광고 활성화를 위한 개인 정보 보호에 대한 법적 고찰: '개인 정보'의 개념을 중심으로 (A Legal Review of Personal Information Protection for Invigorating Online Targeted Advertising: Focusing on the Concept of Personal Information)

  • 조재영
    • 한국산학기술학회논문지
    • /
    • 제20권2호
    • /
    • pp.492-497
    • /
    • 2019
  • 본 연구에서는 빅데이터 시대에 주목을 받고 있는 온라인 맞춤형 광고를 활성화시킬 목적으로 기존 연구들에서 분명하게 규명되지 않았던 '개인 정보'와 '행태정보'의 의미를 명확히 하기 위해 '개인 정보'에 대한 법적 개념을 분석하였다. 분석 대상으로는 '개인정보보호법' 및 동법 시행령에 근거하여 마련된 '개인 정보 침해 요인 평가 지침'과 '개인 정보 비식별 조치 가이드라인'을 선정하였다. 결과에 의하면, '개인 정보'란, (1)살아 있는 개인(단체, 법인, 사물 등은 해당되지 않음)에 관한 모든 종류의 정보로서, (2)개인을 알아볼 수 있는 정보(식별자)이며 개인을 알아보기 어려운 것은 해당되지 않으며, (3)해당 정보 자체로는 개인을 알아볼 수 없어도 다른 정보와 쉽게 결합(결합 대상 정보의 입수 가능성, 결합 가능성이 있어야 함)하여 알아볼 수 있는 정보(속성자)를 포함한다. 보다 구체적으로, 개인 정보에는 기본정보, 고유식별정보, 민감정보, 기타 개인정보 등이 포함된다. 그리고 향후의 연구 방향으로서 기술 발달에 따른 '개인 정보' 개념에 대한 지속적인 연구, '온라인 맞춤형 광고 개인 정보 보호 가이드라인'의 실효성에 대한 연구, 이용자는 물론 사업자의 시각에서 본 개인 정보 보호의 법리에 대한 연구 및 개인 정보와 행태 정보의 명확한 구분을 전제로 한 온라인 맞춤형 광고 연구의 필요성 등을 제안하였다.

가공송전선로와 지중송전선로가 연계된 혼합송전선로에서 피뢰기 적정위치 검토 및 평가 (Assessment of Lightning Arrester Location in Combined Transmission Line Connected whth Overhead Line and Underground Cable)

  • 하체웅;이종범
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 A
    • /
    • pp.443-445
    • /
    • 2000
  • This paper describes the assessment of proper location of lightning arrester in combined transmission line which is connected with overhead line and underground cable. The modeling for simulation is established using the actual system in ATP Draw and EMTP. Simulation is carried out to find out the best point to install the arrester in given the model system. And also voltage and current is analyzed on cable covering protection unit(CCPU). The simulation result demonstrated the best location of arrester in the given transmission line through the detailed analysis and its assessment.

  • PDF

이동통신시스템을 위한 소스 코더와 결합된 채널코딩 방법 연구 (Channel Coding Design Combined with Source Coder for Mobile Communication Systems)

  • 김종현;이인성강석봉이정구
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.19-22
    • /
    • 1998
  • In this study, the efficient channel coding method combined with CS-ACELP is proposed. The same convolutional coder and Viterbi decoder of COMA mobile communication system is used as channel coder. To make the best available use of limited channel coding redundancy, unequal error protection of punctured convolutional coder is used for variable reate allocation. But, the overall code rate is given by 2. The performance of proposed coder is analyzed and simulated in a Rayleigh fading channel. Experimental results show that the objective and subjective speech quality of variable rate channel coding methods are superior to those of non-variable channel coding method.

  • PDF

Effects of Basil and Majoram Essential Oils with or without Ascorbic Acid on Color and Oxidative and Microbial Stability of Beef Patties

  • Chung, Hai-Jung
    • Preventive Nutrition and Food Science
    • /
    • 제9권1호
    • /
    • pp.1-6
    • /
    • 2004
  • Fresh ground beef was mixed with ascorbic acid, basil essential oil, majoram essential oil, or each essential oil combined with ascorbic acid and stored at 1 $\pm$ 1$^{\circ}C$ for 7 days. Color, lipid oxidation (TBARS formation), aerobic bacterial counts and pH were determined. Basil and majoram essential oils were effective in inhibiting color deterioration, lipid oxidation and bacterial growth. The combined addition of basil and ascorbic acid showed the highest protection against color fading, followed by majoram + ascorbic acid, and ascorbic acid alone. Basil and majoram essential oils were most effective in delaying TBARS formation (p < ().01). Ascorbic acid did not exert an antioxidative effect and even exhibited a pro-oxidant effect. The pH values of all samples increased slightly, but no significant differences were observed, either among treatments or throughout the storage time (p > 0.05).

차상통합신호시스템에서 ATP 안테나와 ATS 안테나 사이의 결합계수에 관한 연구 (A Study on the Coupling Coefficient between ATP Antenna and ATS Antenna in Combined On-Board System)

  • 김두겸;김민석;김민규;이종우
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.211-225
    • /
    • 2011
  • Railroad signalling systems are to control intervals and routes of trains. There are ATS(Automatic Train Stop), ATP(Automatic Train Protection), ATO(Automatic Train Operation) and ATC(Automatic Train Control) system. Trains are operated in the section which is met on the signalling system because various signalling systems are used in Korea. On the other words, trains are not operated in the section which is used in the other signalling system. To solve this problem, recently combined on-board system has been developed. The combined on-board system is designed by doubling the ATS, ATP and ATC system. Information signal is received by magnetic sensors in the ATC system and is received by antennas in the ATS and ATP system. Therefore, it is possible to arise transmission problems by magnetic coupling. In this paper, electric model of the ATS and ATP antenna is suggested and interference frequency by the magnetic coupling between the ATS and ATP antenna is estimated numerically. As a results of the magnetic coupling, the value of the magnetic coupling is presented without magnetic induction.

  • PDF

웨이브렛 변환을 이용한 혼합송전계통에서의 디지털 거리계전 알고리즘에 관한 연구 (A Study on the Digital Distance Relaying Algorithm Using Wavelet Transform in Combined Transmission Line with Underground Power Gables)

  • 정채균;홍동석;이종범
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.383-386
    • /
    • 2001
  • Distance relay is tripped by the line impedance calculated at the relay point. Accordingly the accurate operation depends on the precise calculation of line impedance. Impedance can be accurately calculated in case of overhead line. However, in case of power cables or combined transmission lines, impedance can not be accurately calculated because cable systems have the sheath, grounding wires, and cable cover protection units (CCPUs). There are also several grounding systems in cable systems. Therefore, if there is a fault in cable system, these terms will severely be caused much error to calculation of impedance. Accordingly the proper compensation should be developed for the correct operation of the distance relay. This paper presents the distance calculating algorithm in combined transmission line with power cable using wavelet transform. In order to achieve such purpose, judgement method to discriminate the fault section in both sections was proposed using db1 coefficient summation. And also, error compensation factor was proposed for correct calculation of impedance in power cable.

  • PDF

Fuzzy AHP와 BSC 결합모델기반의 Green Supplier 선정 문제 (A Combined Fuzzy AHP and BSC Model based Green Supplier Selection Problem)

  • 서광규
    • 대한안전경영과학회지
    • /
    • 제13권3호
    • /
    • pp.63-69
    • /
    • 2011
  • As environmental protection is becoming more and more important, green production has become a key issue for almost every manufacturer and will determine a manufacturer can be sustainable in the long term. Therefore a performance evaluation system for green suppliers is necessary to determine the suitability of suppliers to cooperate with the company. While the works on the evaluation and/or selection of suppliers are abundant, those that concern environmental issues are rather limited. The objective of this study is to construct a combined model based on fuzzy analytic hierarchy process (FAHP) and balanced scorecard (ESC) for evaluating green suppliers in the manufacturing industry. The ESC concept is applied to define the hierarchy with four major perspectives (i.e. financial, customer, internal business process, and learning and growth), and performance indicators are selected for each perspective. FAHP is then proposed in order to tolerate vagueness and ambiguity of information. Finally, FAHP is finally constructed to facilitate the solving process. With the proposed model, manufacturers can have a better understanding of the capabilities that a green supplier must possess and can evaluate and select the most suitable green supplier for cooperation.