• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.708-722
• /
• 2016

Land-Ocean Interactions in the Coastal Zone (LOICZ) models for nutrient budgets were used to estimate the seasonal capacity of the Youngsan Estuary and Youngam-Geumho Estuary to sink and/or supply nutrients such as dissolved inorganic phosphorus (DIP) and nitrogen (DIN) to provide an understanding of the behavior of the coupled biogeochemical cycles of phosphorus and nitrogen in the estuaries (Youngsan Estuary, Youngam-Geumho Estuary) near Mokpo Harbor. During non-stratified periods (May, September, and November, 2008), simple three-box models were applied in each sub-region of the system, while a two-layer box model was applied during on-site observation of stratification development (July, 2008). The resulting mass-balance calculation indicated that even after large discharges from artificial lakes (in May and July), DIP influxes due to a mixing exchange ($V_{X-3}$, or $V_{deep}$) were more than terrigenous loads, indicating the backward transportation of nutrients from a marine source. The model results also indicated that for nutrient loads (DIP and DIN fluxes) in September, an extreme congestion of nutrients occurred around the mouths (sub-region III of the model) of the estuaries, possibly due to an imbalance in physical circulations between the estuaries and offshore locations. In November, the Youngam-Geumho Estuary, into which freshwater was discharged from artificial lakes (Youngam and Geumho Lake), showed nutrient enrichment in the water column, but the Youngsan Estuary showed nutrient depletion. In conclusion, to efficiently control water quality in the estuaries near Mokpo Harbor, integrated environmental management programs should be implemented. I.e., the reduction of nutrient loads from land basins as well as the deposit of nutrient loads into adjacent coastal lines.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1280-1286
• /
• 2006

Three different virgin activated carbons made of each coal(Calgon), coconut(Samchully) and wood(Picabiol) based activated carbon(AC) were tested for an adsorption performance of 1,4-dioxane in a continuous adsorption column. Breakthrough behavior was Investigated that the breakthrough points of coal, coconut and wood based AC were observed as 3600 bed volumn(BV), 1440 BV and 144 BV respectively. Adsorption capacity(X/M) of coal, coconut and wood based AC was observed. The reported results of adsorption capacity showed that coal based AC was highest(578.9 ${\mu}g/g$), coconut based AC was intermediate(142.3 ${\mu}g/g$) and wood based AC was lowest(7.4 ${\mu}g/g$) due to increasing specific surface area. Moreover, carbon usage rates(CURs) for coal, coconut and wood based AC had been shown as 0.48 g/day, 1.41 g/day and 6.9 g/day respectively. The constant characteristic of the system, k of coal based AC was found to be 91.5 and k of coconut based AC was found to be 17.9. Removal efficiencies of 1,4-dioxane with different ozonation dosages(2 and 5 mg/L) for 20 min ozonation had been shown 38% and 87% respectively. There was no observation for biological removal of 1.4-dioxane by attached micro-organisms when used(3.1 years and over 5 years) biological activated carbon(BAC) without pretreatment of oxidation were employed. When a combination of ozonation(2 mg/L and 5 mg/L) and BAC process for $10{\sim}30$ min was applied, removal efficiency for 1,4-dioxine increased only $2{\sim}6%$ compared to only applying ozonation. Therefore removal efficiency of BAC process prior to using oxidation was proven to negligible. Consequently, the results presented in this paper provide a better insight into the adsorption performance of 1,4-dioxane. This observation suggests that using virgin activated carbon made of coal is the best selection for removal of 1,4-dioxane in the water treatment for an advanced treatment. It is clear from this research that longer EBCT for ozonation or higher ozone concentration are more effective operation methods for removal of 1,4-dioxane than longer EBCT in the BAC process.

• The Journal of Engineering Geology
• /
• v.22 no.3
• /
• pp.343-351
• /
• 2012

This study proposes a modified equation to calculate the factor of safety for an infinite slope considering the saturation depth ratio as a new variable calculated from rainfall infiltration into unsaturated soil. For the proposed equation, this study introduces the concepts of the saturation depth ratio and subsurface flow depth. Analysis of the factor of safety for an infinite slope is conducted by the sequential calculation of the effective upslope contributing area, subsurface flow depth, and the saturation depth ratio based on quasi-dynamic wetness index theory. The calculation process makes it possible to understand changes in the factor of safety and the infiltration behavior of individual rainfall events. This study analyzes stability changes in an infinite slope, considering the saturation depth ratio of soil, based on the proposed equation and the results of soil column tests performed by Park et al. (2011 a). The analysis results show that changes in the factor of safety are dependent on the saturation depth ratio, which reflects the rainfall infiltration into unsaturated weathered gneiss soil. Under continuous rainfall with intensities of 20 and 50 mm/h, the time taken for the factor of safety to decrease to less than 1.3 was 2.86-5.38 hours and 1.34-2.92 hours, respectively; in the case of repeated rainfall events, the time taken was between 3.27 and 5.61 hours. The results demonstrate that it is possible to understand changes in the factor of safety for an infinite slope dependent on the saturation depth ratio.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.2
• /
• pp.119-127
• /
• 1991

In order to reveal the mechanism of heavy metal behavior in soils relating to factors such as soil pH, organic matter, C.E.C. and soil minerals influencing the activities of heavy metals, Cd, Cu and Zn were applied to soil columns filled with 8 different soils with adjusted soil pH to several levels between 3.0 to 11.0 and the amounts of adsorption and desorption of these heavy metals were measured. 1. At the adsorption maxima of three heavy metals(Cd, Cu and Zn) soil pH appeared to be near 6.0 regardless of properties of the 8 soils, and adsorption gradually decreased above and below pH 6.0. This phenomenon was the same in both heavy metal solutions and mixed solutions, and the mixed solution, containing three heavy metals, revealed slightly higher amounts of Cu adsorption and Cd adsorption. 2. It was also found that the adsorption of Cu and Zn by soils was positively correlated with C.E.C. and the organic matter of soils, respectively. However, the pH values showing maxima of heavy metal adsorption were negatively correlated with organic matter content by contrast with the correlation between the maxima and the C.E.C. values in soils. 3. The adsorption of Cu by soils markedly increased more with $Ca(OH)_2$ application than with NaOH application for soil pH adjusment. This was probably because of Ca effects in Cu precipitation in soils, in addition to the effect of the simple soil pH itself on Cu adsorption 4. It was also revealed that adsorbed Cu was hardly desorbed by $N-NH_4OAC$ solution from the Daejeong soil series compared to the Jeonbug and Yechun soil series. This was because the Daejeong soil series consisted of large amounts of expanding type Vermiculite minerals and also was high in C.E.C. and soil organic matter.

• 한국해양학회지
• /
• v.10 no.1
• /
• pp.33-40
• /
• 1975

The ion exchange sorption and elution behavior of toxic heavy metal ions, such as Hg(II) and Zn(II), have been studied in aqueous and methanolic media of MCl (M: K, Na and NH$\_$4/). The ion exchange resins studied are Dowex 1-X8, Cl$\^$-/ (50-100 or 200-400 mesh) and Dowex 50W-X8, M$\^$+/ form (M: K, Na, NH$\_$4/ and H). the sorption and elution of metal ion on the resin is largely due to the formation of the anionic chlororocomplex of metal ion. The addition of methanol in the medium contributes markedly to the distribution data. In order to apply this work for the treatment of polluted sea water with toxic heavy metal ions, removal experiment of the metal ions from the synthetic sample solution was investigated.