• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.765-770
• /
• 2001

The objective of the present study is to investigate the effects of the various inlet boundary layer thickness on convective heat transfer distribution in a turbine cascade endwall and blade suction surface. In addition, the proper height of the boundary layer fences for various inlet boundary layer thickness were applied to turbine cascade endwall in order to reduce the secondary flow, and to verify its influence on the heat transfer process within the turbine cascade. Convective heat transfer distributions on the experimental regions were measured by the image processing system. The results show that heat transfer coefficients on the blade suction surface were increased with an augmentation of inlet boundary layer thickness. However, in a turbine cascade endwall, magnitude of heat transfer coefficients did not change with variation of inlet boundary layer thickness. The results also present that the boundary layer fence is effective in reducing heat transfer on the suction surface. On the other hand, in the endwall region, boundary layer fence brought about the subsidiary heat transfer increment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.2
• /
• pp.205-215
• /
• 2001

An experimental study has been performed to investigate the heat transfer characteristics of fin and tube heat exchanger. The existing transient and steady methods are very difficult to apply for the measurements of heat transfer coefficients of a thin heat transfer model. In this study the lumped capacitance method was adopted. The heat transfer coefficients were measured by using the lumped capacitance method based on the liquid crystal thermography. The method is validated through impinging jet and flat plate flow experiments. The two experiments showed that the results of the lumped capacitance method with polycarbonate model showed very good agreements with those of the transient method with acryl model. The lumped capacitance method showed similar results regardless of the thickness of polycarbonate model. The method was also applied for the heat transfer coefficient measurements of a fin and tube heat exchanger. The quantitative heat transfer coefficients of the plate fin were successfully obtained. As the frontal velocity increased, the heat transfer coefficients were increased, but the color-band shape showed similar patterns regardless of frontal velocity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.701-705
• /
• 2002

In order to realize full color display, two approaches were used. The first method is the patterning of red, green, and blue emitters using a selective deposition. Another approach is based on a white-emitting diode, from which the three primary colors could be obtained by micro-patterned color filters. White-light-emitting organic light emitting devices (OLEDs) are attracting much attention recently due to potential applications such as backlights in liquid crystal displays (LCDs) or other illumination purposes. In order for the white OLEDs to be used as backlights in LCDs, the light emission should be bright and have Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.33, 0.33). For obtaining white emission from OLEDs, different colors should be mixed with proper balances even though there are a few different methods for mixing colors. In this study, we will report a white organic electroluminescent device based on an incomplete energy transfer. In which the blue and green emission come from the same layer via incomplete energy transfer.

• Journal of Information Display
• /
• v.12 no.2
• /
• pp.93-96
• /
• 2011

Single-phased $CaZrO_3:Dy^{3+}$, $Tm^{3+}$ series have been successfully synthesized by solid-state reaction, and their luminescence properties were investigated. Under 355 nm excitation, $CaZrO_3:Dy^{3+}$ series showed characteristic emission of $Dy^{3+}$, which exhibited yellowish white color. By introducing $Tm^{3+}$ into the matrix, the emitted hue of the $Dy^{3+}$-doped sample could be easily tailored to white, and simultaneously, energy transfer from $Tm^{3+}$ to $Dy^{3+}$ was observed. The color coordinates of the optimum white-emitting sample were (0.321, 0.323), which were very close to the data of the National Television Standard Committee (0.33, 0.33). The co-activated phosphors presented good match to ultraviolet light-emitting diodes (LEDs), which revealed that they could be novel promising phosphors utilized in white LED application.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.10
• /
• pp.1314-1325
• /
• 1997

Experiments have been conducted to determine the flow and heat transfer characteristics for a two-dimensional turbulent wall attaching offset jet at different oblique angles to a flat surface. The distributions of the wall static pressure coefficient and time-averaged reattachment position for various offset ratios and oblique angles have been measured. The local Nusselt number distributions on the plate surface were also measured using liquid crystal as a temperature indicator. The new hue-capturing technique utilizing a true color image processing system was used to accurately determine the temperature of the liquid crystal. The experiments were carried out at Reynolds number, Re (based on D) of from 7300 to 21,300 with offset ratio, H/D from 2.5 to 10, and oblique angle, .alpha. from 0 deg. to 400 deg..

• Medical Lasers
• /
• v.8 no.1
• /
• pp.7-12
• /
• 2019

Background and Objectives Skin and soft tissue defects can be treated according to a range of strategies, such as local flap, skin graft, biological dressing, or free flap. On the other hand, free tissue transfer usually leaves a distinct scar with an inconsistency of color or hypertrophy. This problem is highlighted if the defect is located on the face, which could have devastating effects on a patient's psychosocial health. Materials and Methods The authors used an erbium : yttrium-aluminum-garnet (Er:YAG) laser to resurface the free flap skin and match the color with the surrounding facial skin. This study evaluated the effectiveness of laser skin resurfacing on the harmonious color matching of transferred flap. Patients who had undergone laser resurfacing on facial flap skin between January 2014 and December 2018 were reviewed retrospectively. An ablative 2,940-nm fractional Er:YAG laser treatment was delivered to the entire flap skin at 21 J/cm² with the treatment end-point of pinpoint bleeding. Several months later, the clinical photographs were analyzed. The L^*a^*b^* color co-ordinates of both the flap and surrounding normal skin were measured using Adobe Photoshop. The L^*a^*b^* color difference (ΔE) for the scar and normal surrounding skin were calculated using the following equation: ${\Delta}E=\sqrt{({\Delta}L)^2+({\Delta}a)^2+({\Delta}b)^2}$ Results All five patients were satisfied with the more natural appearance of the flaps. The ΔE values decreased significantly from the pre-treatment mean value of 19.64 to the post-treatment mean value of 11.39 (Wilcoxon signed-rank test, p = 0.043). Conclusion Ablative laser resurfacing can improve the aesthetic outcome of free tissue transfer on the face.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.78-86
• /
• 2003

When we transformed from Monochrome-data to Color-data in text mode, we used hardware-method to design the circuit which is convertible in real time. We saved color information in every screens that can make screen in Color Palette ROM and it is also generated 8bit. lower 4bit assign foreground color and upper 4bit can design to have background color. We have Address Reduction ROM to remove repeated address and reduce volume of Color Palette ROM to 1/16. Besides, we have many D-FF to save address, data and page information temporarily after that, we have management process 8 times through counter in real time. Finally, we chose either foreground color or background color in multiplex and established color information was sended to the color video controller. Thus, you can use it as a good interface when yow transfer many control devices with Monochrome display (ex, LCD Monitor) into devices with Color display.

• Conservation Science in Museum
• /
• v.31
• /
• pp.55-70
• /
• 2024

Style transfer algorithms are currently undergoing active research and are used, for example, to convert ordinary images into classical painting styles. However, such algorithms have yet to produce appropriate results when applied to Korean cultural heritage images, while the number of cases for such applications also remains insufficient. Accordingly, this study attempts to develop a style transfer algorithm that can be applied to styles found among Korean cultural heritage. The algorithm was produced by improving data comprehension by enabling it to learn meaningful characteristics of the styles through representation learning and to separate the cultural heritage from the background in the target images, allowing it to extract the style-relevant areas with the desired color and texture from the style images. This study confirmed that, by doing so, a new image can be created by effectively transferring the characteristics of the style image while maintaining the form of the target image, which thereby enables the transfer of a variety of cultural heritage styles.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.34-43
• /
• 2017

Paperweave wallcoveing is necessary to develop new designs based on the analysis of global trend and reflection of Korean traditional image to improve commercial value in the worldwide market. The purpose of this study was to understand design trend and share valuable data by product analyzing of major paperweave wallcovering brands - Yeomyung (Korea), Phillip Jeffries (USA) and Omexco (Belgium). In the dominant color, the largest proportion is YR. Analysis of each brand color, Omexco is using the widest range of colors, the colors of each brand uses an exclusive of its own brand compared to other brands are Green (Yeomyung), Blue (Phillip Jeffries), Red (Omexco). The number of colors, Yeomyung and Philip Jeffries have a high ratio of bi-color, Omexco is revealing various color expression methods such as 55% solid color, two or three multi-color are each half of the balance. Analysis of weaving, Yeomyung has a high ratio of balanced plain, at number of mixture, Yeomyung and Phillip Jeffries are using mostly paper-yarn but Omexco is using multi-mixture materials in some part of theirs. Regarding analysis of finishing, all three brands are mostly selling unfinished paperweave wallcovering but some solid coated are appearing at Yeomyung and Omexco. Yeomyung has more foil transfer compared with the other brands, Phillip Jeffries has some digital printed products.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.8
• /
• pp.828-836
• /
• 2012

This study provided the data for the planning of knit apparel by analyzing structural effects of intarsia and jacquard knit on mechanical properties, subjective hand measurements, and preference. Intarsia and 7 types of color jacquard (floating jacquard, normal jacquard, bird's eye jacquard, tubular jacquard, ladder's back jacquard, blister jacquard, and transfer jacquard) were used. The samples (with a gauge of 14) were knitted using 100% wool 2/48's yarn by a Shima Seiki SIG computer knitting machine. Mechanical properties and hand values were measured by a KES-FB system. Subjective hand and favorable images were surveyed based on women in their 20s and 30s. The data were analyzed by a factor analysis, ANOVA and correlation analysis using SPSS 12.0. The subjective hand of intarsia and jacquard knits was categorized into 'thermofeeling', 'weight/flexibility', and 'durability'. The results of the favorable image survey for F/W outer knitwear showed that tubular jacquard was most favorable; however, the transfer jacquard was least favorable. Among the three factors that explain the subjective hand, thermofeeling had a strong influence on the favorable image of consumers. Bird's eye jacquard and tubular jacquard turned out to be most suitable for suits, intarsia and floating jacquard were suitable for cardigans and sweaters, ladder's back jacquard was suitable for hats or mufflers, and transfer jacquard was suitable for home fashion rather than garments.