• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1104-1111
• /
• 2009

This study was conducted to evaluate the effect of Sikhe made by medicinal herb on the functional level of liver. Water extract I (12.9% W/W) and II (25.8% W/W) were obtained from medicinal materials: Caragana Sinica, Glycyrrhiza uralensis, Atractylodes rhizoma alba, Atractylodes rhizoma alba, Crataegus pinnatifida, Paeonia lactiflora Pasll., Hordeum vulgare Linne, Oryza sativa Linne, ginger, peer and jujube. Experimental groups were divided into the control diet group (C), high fat diet group (HF), high fat diet treated with 5% extract I group (HFE I ) and high fat diet treated with 5% extract II group (HFE II). In sensory evaluation, overall quality scores associated with color, aroma, flavor and taste were significantly higher in water extract II than in water extract 1. After investigating functional and lipid levels of livers in rats, we found that the administration of water extract I or water extract II to the high fat diet group (HF) did not affect the gain of body weight but mildly reduced GOT or GPT activity in the high diet group. Moreover, administration of these medicinal herbal extracts significantly decreased the levels of total lipid, triglyceride and total cholesterol in the high fat diet group (HF). However, administration of these medicinal herbal extracts did not affect the level of phospholipid. In conclusion, as Sikhe made by medicinal herb slightly decreased the activity of GOT or GPT and amount of lipid in liver, prevention against high fat diet is thought to be important for liver protection.

• Journal of Life Science
• /
• v.24 no.8
• /
• pp.865-872
• /
• 2014

In this study, ethanol and hot water extracts of lees from Korean traditional wine (J-B, J-S, J-Y, J-H, and J-W) were prepared, and their effects on blood coagulation, platelet aggregation, and hemolysis of human red blood cells (hRBCs) were investigated to develop functional food ingredients from lees. The pH and brix of the lees ranged from 3.90 to 4.29 and 5.0 to $27.0^{\circ}$, respectively, and there was a huge difference in the water and ethanol content among the lees. The nuruk and additives used affected the color and physicochemical properties of lees. The J-W takju made from only rice and traditional nuruk, which has $13^{\circ}$ brix and 1.8% of alcohol, has potential as functional food ingredient. With regard to the extraction yields of lees, higher yields were obtained from J-H, which contains different medicinal plants, in ethanol, followed by J-W, J-B, J-S, and J-Y. Higher extraction yields of lees were obtained from J-S in hot water, followed by J-B, J-W, J-H, and J-Y, respectively. The ethanol extract of J-H and the hot water extract of J-Y had the highest contents of total polyphenol and total flavonoids among the lees extracts. The 10 lees extracts did not show hemolysis activity against hRBCs up to 5 mg/ml. In an anticoagulation activity assay, the ethanol extracts of three yakju lees (J-B, J-S, and J-Y) and the hot water extract of J-W inhibited thrombin activity, whereas the hot water extract of J-B, J-S, and J-H inhibited blood coagulation factors. In an antiplatelet aggregation activity assay, only the J-W takju lees showed significant inhibition activity. Our results suggest that lees from traditional wine had high potential as a novel antithrombosis agent.

• Journal of Life Science
• /
• v.23 no.3
• /
• pp.426-431
• /
• 2013

With the objective of developing a functional food source, we established optimal processing conditions for the larvae of Allomyrina dichotoma, which have been used in traditional medicine to treat hepatic disorders in Korea. Without suitable processing, the larvae are difficult to consume as a food because of their disgusting taste and smell; moreover, in this form they might be a potential microbial hazard. In this study, we investigated the effect of feeding material, sterilization, and powdering after freeze-drying on the food quality of the larvae of A. dichotoma and on cytotoxicity against Raw 264.7 cells. Three to five days feeding with the sawdust from discarded oak-trees is sufficient for the breeding process. The sawdust was sterilized by vapor for five minutes. Sterilization of the larvae at a high temperature ($115^{\circ}C$ for 5 min, 0.9 $kgf/cm^2$) is necessary to eliminate pathogenic bacteria and fungi. The results of the cytotoxicity assay showed no toxicity in the prepared extract from larvae of A. dichotoma. In addition, to prepare the larvae for human consumption, various feeds were used and the smell, color, and taste were evaluated. Our results suggested that larvae of A. dichotoma could be developed as food source when a suitable processing method is established.

• Journal of Life Science
• /
• v.23 no.7
• /
• pp.854-862
• /
• 2013

The number of thoracic and lumbar vertebrae is known to be an unfixed trait among mammals. This study focused on the relationship between numerical variations of cervical (CER), thoracic (THO), and lumbar (LUM) vertebrae and the total number of vertebrae (TNV) and carcass traits in Jejunative black pigs (JBPs), Landrace pigs, and their intercrossed $F_2$ population. There were no numerical variations in CER vertebrae. On the other hand, the numbers of THO and LUM vertebrae and the TNV varied in all three populations. Of the traits investigated in the three populations, only the means${\pm}$SE of the LUM vertebrae did not show statistical significance (p>0.05). The carcass weights (CW), meat color (MC), marbling score (MS), backfat thickness (BFT), carcass length (CLE), THO vertebrae, and TNV all showed statistical significance (p<0.05). The JBP had 14-16 THO vertebrae, 5-6 LUM vertebrae, and 27-29 TNV. The Landrace pigs had 15-16 THO vertebrae, 5-7 LUM vertebrae, and 28-29 TNV. The $F_2$ population had 14-17 THO vertebrae, 5-7 LUM vertebrae, and 27-30 TNV. In the F2 population, increased numbers of THO vertebrae and TNV were associated with a significant increase in the CW, CLE, and BFT (p<0.05). In particular, the increase in the TNV was caused by an increase in the number of THO rather than LUM vertebrae. Although the animals with a greater number of THO and TNV had thicker backfat, they had a longer CLE and a heavier CW. Both these traits are economically more important than the level of backfat when determining the productivity level. These results suggest that genetic selection to increase the number of vertebrae, especially in Landrace pigs, JBPs, and their related populations, may be an excellent strategy for improving productivity.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.122-134
• /
• 2015

This study was conducted to investigate the potential of torrefied larch wood as a raw material of pellets. First of all, larch chip was torrefied at the temperatures of 230, 250 and $270^{\circ}C$ for 30, 50 and 70 min. Secondly, moisture content, moisture absorption, higher heating value and ash content of the torrefied chip were measured to examine the effects of torrefaction conditions on the fuel characteristics of larch. Thirdly, surfaces of the torrefied chip were observed by light microscope (LM), field emission scanning microscope (FE-SEM) and SEM-energy dispersive spectroscopy (EDXS). With the increases of torrefied temperature and time, contents of lignin increased and those of hemicellulose reduced. Moisture content of torrefied larch chip was greatly lower than that of non-torrefied chip. Moisture absorption of the torrefied chip decreased as torrefaction temperature increased. As torrefaction temperature increased, higher heating value and ash content of larch chip increased. However, durability of torrefied-larch pellets was remarkably lower comparing to non-torrefied-larch pellets. When surface of larch chip was observed by LM and FE-SEM, surface color and cell wall of the chip was getting darker and more collapsed with the increases of torrefaction conditions. Through the analysis of SEM-EDXS, distribution and quantity of lignin existing on the surface of larch chip increased with the increases of torrefied conditions. In conclusion, $270^{\circ}C$/50 min might be an optimal condition for the torrefaction of larch with the aspect of fuel characteristics, but torrefaction condition of $230^{\circ}C$/30 min should be considered according to the durability of torrefied-larch pellets.

• Korean journal of food and cookery science
• /
• v.17 no.5
• /
• pp.483-489
• /
• 2001

The objective of this study was to investigate the effect of ripening on the quality of kimchi or freeze-dried/rehydrated kimchi. Kimchi stored/ripened at 0$\^{C}$ for 120 days was taken at an interval of 10 days and freeze-dried/rehydrated with water. The number of lactic acid bacteria(LAB), shearing force and sensory properties of kimchi ripened (Raw sample) or kimchi ripened/freeze-dried/rehydrated (F/D sample) were observed. The results were as follows: (1) The number of LAB of Raw and F/D samples decreased slightly during ripening for 120 days, while the pH of both samples decreased. The number of LAB in kimchi decreased up to 6∼16% of the original value by freeze-drying. (2) Ripening for 120 days did not affect shearing force of kimchi while freeze-drying increased markedly its shearing force. (3) Although overall acceptability and taste of Raw and F/D samples decreased gradually, the degree of change between two samples was different. The odor of Raw and F/D samples decreased slightly during ripening for 120 days while the degree of change between two samples was similar after 70 days of ripening. Moistness of Raw and F/D samples was maintained relatively stable during ripening. Chewiness of Raw sample decreased during ripening for 120 days while that of F/D sample was not affected by ripening. Color of Raw and F/D sample was changed during ripening while the degree of change between two samples was not significant. It can be concluded that the change of some sensory properties between Raw sample and F/D sample was affected by ripening for 120 days while the change in the number of LAB, pH and shearing force between both samples was not affected markedly by ripening.

• Food Science of Animal Resources
• /
• v.33 no.4
• /
• pp.531-541
• /
• 2013

This study was performed to investigate the antioxidant effect of Sansa (Crataegi fructus) extract in vitro, and to evaluate the functional effects of Sansa powder addition on the quality properties and storage characteristics of Tteokgalbi. Total polyphenol and flavonoid contents of Sansa extract were found to be 127.00 mg/g and 54.05 mg/g, respectively. The DPPH radical scavenging activity of Sansa extract was high and it was similar to the BHA and BHT. The Tteokgalbi was prepared by 0% (N), 0.1% (S1), 1% (S2), and 2% (S3) of the Sansa Powder. Addition of Sansa powder decreased the protein and lipid contents, but the ash content was significantly increased (p<0.05). Increasing the amount of Sansa powder in the pork Tteokgalbi tended to increase the water holding capacity (WHC) values and the cooking loss (p<0.05). The addition of Sansa powder increased the hardness and chewiness values, but did not affect the cohesiveness and springiness values. In the sensory evaluation, the S3 Tteokgalbi had the best score in color. Values of pH, total microbial counts, thiobarbituric acid (TBA) and volatile basic nitrogen (VBN) values decreased significantly added Sansa powder relative to the normal (p<0.05). The S3 Tteokgalbi was significantly (p<0.05) more effective for delaying lipid peroxidation than the other groups. Sansa powder addition increased the L (lightness) and a (redness) values. Therefore, the results demonstrate that adding the Sansa powder to the pork Tteokgalbi tended to improve antioxidative and antimicrobial effects during the chilled storage period.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.737-744
• /
• 2001

This study was carried to investigate the changes in physical and chemical properties during preparation of Yukwa. Protein content of glutinous rice was decreased during soaking time and acid and pH values were increased while contents of lipid and ash were not changed. Particle size distribution showed thate average particle size of 7 days soaking treatment smaller than those of 3 days and starch damage of glutinous rice flour was increased during soaking time. The major flavor components after soaking were found ethyl ester acetic acid, ethanol, 2-butan -ol, 2-methyl 1-propanol, 1-butanol, 3-methyl 1-butanol and 1-pentanol, propanoic acid. Content of acetic acid and butanoic acid were rapidly increased during soaking time. Results for ratio of storage modulus(G') and loss modulus(G') in glutinous rice flour dough indicated $tan{\delta}$ was increased for a while and decreased as frequency increased. G' value was very similar with G' value after steaming which means rubber-like property while G' and G' value were changed after during storage time. Treatment at $-20^{\circ}C$ had the highest hardness for cutting degree of dough. There was no difference in color value between different water contents. Hardness of Bandegi (sheet) was decreased as water content increased and the highest popping value was obtained at 18% of water contents. Adding 3% soaked bean had higher redness value of Yukwa and lower value in yellowness.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.57-63
• /
• 1984

This study was designed to compare the quality characteristics of freeze and spray dried red ginseng extract powders(RGEPs) by drying methods, which have been required to maintain the stability for the quality. Chemical compositions, major ginsenoside contents and color intensities of these Products were compared by drying conditions. The moisture absorption rates and optical densities also were compared during storage under maltreatment conditions of a various relative humidities (75, 86and 92 RH) and two different temperatures (37 and $50^{\circ}C$). It was found that decreases of total major ginsenosides contents in freeze and spray dried RGEPs were 5.4 % to 6.7 % during storage for 6 months at $37^{\circ}C$, 75 % RH. When these products packaged with inner seal of Al-foil laminate paper (Al-foil; 9 ${\mu}m$) were stored for 6 months at $37^{\circ}C$, 75 % RH. the moisture absorption rates of freeze and spray dried RGEPs were ranged 42 % to 82 %, 8 % to 16 %, respectively. In storage for 6 months at $37^{\circ}C$, 86 % RH, spray dried RGEP was higher in brown pigment($400{\sim}490nm$) than freeze dried RGEP while freeze dried was higher in pyrazine (278 nm), HMF and furfural (285 nm) than spray dried RGEP. It was found that RGEPs showed a strong anti-oxidative activity by electron donating ability to DPPPH, but there was no significant difference between freeze and spray dried RGEPs.