• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.575-585
• /
• 1998

Use of the digital camera as a color measuring device was proposed. Digital camera can save, adjust and transmit image using computer. But it has great disadvantage that color of image possibly altered by environment of image capturing state, so the color reproducibility of digital camera can severly damage, Casmatch, the supplement for color correction, was proposed for enhance the color reproducibility of digital camera. Thus for study the efficacy of the Casmatch in enhancing the color reproducibility of digital camera, image of 78area in 39teeth was captured three times during two days and color reproducibility was evaluated and analyzed in terms of the use of Casmatch, teeth positions, and area within the tooth and comparatively analyzed. Results were as follow ; 1. ${\Delta}$E the color reproducibility of digital camera was 6.90${\pm}$3.27 in same day and 7.43${\pm}$3.94 in different day, and the color reproducibility when using Casmatch correction was 6.21${\pm}$3.86, 7.59${\pm}$4.48, there is no enhancement in using Casmatch correction. 2. There is no difference in color reproducibility between teeth, but color reproducibility of the middle third was greater(p<0.05) than the gingival third before color correction using Casmatch.

• The Journal of Advanced Prosthodontics
• /
• 제10권1호
• /
• pp.8-17
• /
• 2018

PURPOSE. The study aimed to identify the accuracy and reproducibility of preparations made by gypsum materials of various colors using quantitative and semi-quantitative three-dimensional (3D) approach. MATERIALS AND METHODS. A titanium maxillary first molar preparation was created as reference dataset (REF). Silicone impressions were duplicated from REF and randomized into 6 groups (n=8). Gypsum preparations were formed and grouped according to the color of gypsum materials, and light-scanned to obtain prepared datasets (PRE). Then, in terms of accuracy, PRE were superimposed on REF using the best-fit-algorithm and PRE underwent intragroup pairwise best-fit alignment for assessing reproducibility. Root mean square deviation (RMSD) and degrees of similarity (DS) were computed and analyzed with SPSS 20.0 statistical software (${\alpha}=.05$). RESULTS. In terms of accuracy, PREs in 3D directions were increased in the 6 color groups (from 19.38 to $20.88{\mu}m$), of which the marginal and internal variations ranged $51.36-58.26{\mu}m$ and $18.33-20.04{\mu}m$, respectively. On the other hand, RMSD value and DS-scores did not show significant differences among groups. Regarding reproducibility, both RMSD and DS-scores showed statistically significant differences among groups, while RMSD values of the 6 color groups were less than $5{\mu}m$, of which blue color group was the smallest ($3.27{\pm}0.24{\mu}m$) and white color group was the largest ($4.24{\pm}0.36{\mu}m$). These results were consistent with the DS data. CONCLUSION. The 3D volume of the PREs was predisposed towards an increase during digitalization, which was unaffected by gypsum color. Furthermore, the reproducibility of digitalizing scanning differed negligibly among different gypsum colors, especially in comparison to clinically observed discrepancies.

• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.165-172
• /
• 2012

The stability of yellow and red dyes prepared from safflower (Carthamus tinctorius L.) in aqueous solution and in solid state was investigated. External factors such as light irradiation and temperature on the stability were examined during storage. Changes in absorbance of dye solutions and the color changes of fabrics dyed after long time storage were measured. Also, color reproducibility during storage was investigated by dyeing test on various fabrics. Red colorant in aqueous solution was very unstable to light, resulting that about 40% of absorbance were lost in 12hrs. The absorbance of yellow dye solutions was not decreased within 84hrs. In aqueous medium, yellow dye was much more stable than carthamin. Both dyes are relatively stable for long storage when they are stored in solid state compared to when in aqueous solution. Color changes are marginal in both dyes.

• 한국콘텐츠학회논문지
• /
• 제10권11호
• /
• pp.243-250
• /
• 2010

티타늄의 표면처리방법과 저온용융도재의 글레이징 온도 변화에 따른 티타늄-세라믹 보철물의 결합강도와 색조재현성에 관해 분석하고자 하였다. 표면처리방법에 따른 결합강도를 비교한 결과, TiN 코팅 처리한 STB1시편이 가장 높게 나타났으며, 전용결합재를 사용한 SB1시편, gold 코팅 처리한 SGB1시편 순으로 나타났다. 글레이징 온도에 따른 결합강도는 글레이징 온도가 $770^{\circ}C$인 시편들이 $720^{\circ}C$에서 글레이징을 실시한 시편들에 비하여 결합강도가 증가하였으며, $810^{\circ}C$에서 글레이징을 실시한 시편들에서는 결합강도가 감소하는 것으로 관찰되었다. 색조관찰 결과 글레이징 온도가 높아질수록 명도(${\Delta}L$)가 높아졌으며, 티타늄의 표면처리에 의한 색조가 티타늄-세라믹의 색조에 영향을 주었으며, 그 결과 SB1과 SGB3이 색조재현성이 가장 우수한 것으로 평가되었다.

• 세라미스트
• /
• 제21권1호
• /
• pp.55-63
• /
• 2018

Recently, display technology has been focused in regard with with color reproduction, contrast ratio, image resolution and color bit. Among these technologies, the color reproducibliity of White, Red, Green, and Blue is associated with the TV plaform and is expressed as a major technology. Major TV platforms are divided into three categories since 2015, including LCD-based phosphor coverted LED BLU technology, QD sheet technology using nano-sized quantum dots, and OLED technology. In this paper, we describe the color reproducibility definition and background, luminescent materials with wide color gamut, color reproducibility of TV display performance, and discuss about next luminescent materials.

• 복식문화연구
• /
• 제26권5호
• /
• pp.754-763
• /
• 2018

This study examined the color reproducibility and color fastness of digital textile printing for nylon sublimation transfer. After measuring the temperature and time suited to nylon sublimation transfer, the researchers conducted various tests for comparison and analysis including polyester transfer paper on polyester fabric to check dyeing characteristics, color change, sharpness, and the rubbing fastness of the dyeing samples for nylon sublimation transfer. These tests produced the following results. At $185^{\circ}C$ and $187^{\circ}C$, the sublimation transfer dyeing characteristics of nylon were similar to those of polyester and the researchers even observed superior color development in some colors; at a low temperature of $180^{\circ}C$, the sample that was worked on had the lowest level of color development. The examination of color difference (${\Delta}E$), which compared $L^*a^*b^*$ values, showed that the ${\Delta}E$ value of magenta was 10.34, that of yellow was 24.70, and that of black was 15.28. These results highlight the important role of heat treatment temperature and time on color development in nylon sublimation transfer. Concerning sharpness, the samples subjected to higher temperature heat treatment exhibited fewer color spreading phenomena around lines. Thus, dyeing properties and fastness can be enhanced by elongating time at low temperatures and shortening time at high temperatures; however, considering production time constraints as well as the need to produce industrially marketable quantities, the findings of this study suggest that the heat treatment temperature most suitable for nylon sublimation transfer is $187^{\circ}C$ for a duration of 50 seconds.

• 한국안광학회지
• /
• 제13권4호
• /
• pp.109-114
• /
• 2008

목적: 본 연구는 색각검사법의 반복측정에 따른 결과의 재현성을 평가하기 위해 진행하였다. 방법: 연구 대상자는 선천성 색각이상을 가지고 있지 않은 일개 대학교 안경광학과 학생 30명이었다. 색각이상검사 종류는 한식색각검사와 Hans 15 hue 검사 그리고 Lanthony D 15 hue 검사를 선택하였고, 3명의 검사자를 비교하기 위한 검사에서는 이시하라검사도 추가하였다. 결과: 가성동색표에서는 모두 정상으로 분류되어졌으나, 색분별법에서는 1명이 약한청황색각이상을 보였다. 가성동색표는 3번의 측정 및 검사자간 결과값이 일치하였으며, 색분별법 반복 측정에서 경미한 오류들의 차이가 나타났다. 그러나 실제 색각이상자의 분류에 있어서는 반복측정에 따른 결과값이 차이는 나타나지 않았다. 결론: 각 검사자는 비교적 간단한 색각검사라도 좀더 숙련된 기술로 피험자를 대하는 것이 필요하다. 피험 자 역시 세 번의 측정으로 인한 경험에 의존하여 색각검사를 하기보다는 매 검사는 신중을 기해야 함이 요구되어 진다. 선별검사에서는 두 가지 검사의 병행이 요구되어진다.

• 한국통신학회논문지
• /
• 제31권3C
• /
• pp.264-270
• /
• 2006

In this paper, we propose the modified display color control system using white point line, boundary lines and S-shaped curves to emphasize blue and red tone colors on CIE1931 diagram. The proposed system divides RGB gamut into movable area and non-movable area by using boundary lines. The colors in movable area are moved into right side or left side along quadratic curve to change the bluish (or reddish) color to more bluish (or more reddish), while those in non-movable area are excepted from color control to prevent skin color from changing. The loci of the quadratic curves are very similar to the arc of the white-point line which connects all points that represent the chromaticities of a black body radiator at different temperatures and is also called the black body locus. The RGB gamut extension by movement of chromaticity coordinate can improve color reproducibility. Therefore in the case of application to LCD, the display shows excellent performance because the LCD's color reproducibility is comparatively lower than that of other display systems. The proposed system is also experimentally demonstrated with Xilinx Virtex FPGA XCV2000E- 6BG560 and the TV set.

• 대한치과보철학회지
• /
• 제47권3호
• /
• pp.348-355
• /
• 2009

연구 목적: ShadeEye-Ncc dental chroma meter (Shofu Inc., Kyoto, Japan)와 Shadepilot$^{TM}$ system (Degudent Inc., Hanau, Germany)의 도재색조 재현의 정확성을 비교연구하여 보고자 함이다. 연구 재료 및 방법: ShadeEye-Ncc dental chroma meter와 Shadepilot$^{TM}$ system을 사용하여 Vitapan 3D Master shade guide의 2M2와 3M2 shade tap.을 측색하고, 이 자료를 통하여 shade guide tap. 형태로 도재시편을 제작한다. 시편제작 시 사용하는 porcelain system은 ShadeEye-Ncc dental chroma meter는 Vintage Halo Porcelain system을, Shadepilot$^{TM}$ system은 VitaOmega900 Porcelain system을 사용한다. 모델인 shade tap.과 제작된 도재시편을 spectrophotometer로 측색하고, 그 결과를 토대로하여 ${\Delta}E$를 계산하여, 두 측색기의 정확성을 비교검증하였다. 결과: 1. Shadepilot$^{TM}$ system이 ShadeEye-Ncc dental chroma meter에 비하여 더 적합한 도재색조 재현성을 나타내었다 (P <.05). 2. 모델인 Shade tap.의 shade에 따라서 도재색조 재현성에 차이를 나타내었다. 2M2 shade tap.에 비하여 3M2 shade tap.에서 더 적합한 도재색조 재현성을 나타내었다 (P <.05). 3. 두 측색기 모두에서 제작된 도재시편의 ${\Delta}E$가 평균4.44-6.14로 육안으로 구분 가능한 정도의 색조차이를 보였다. 결론: Shadepilot$^{TM}$ system이 비교적 더 정확한 도재색조 재현성을 나타낸다고 할 수 있으며, ShadeEye-Ncc dental chroma meter를 사용할 때는 치아 전체의 여러부분에서 측색을 하여 정확성을 높이는 것이 필요하리라 생각된다.

• 한국의류학회지
• /
• 제34권3호
• /
• pp.508-517
• /
• 2010

One-step reduction/dyeing method was optimized for wool dyeing with natural indigo dye in this study. The effects of reduction/dyeing conditions including dye temperature and time, the pH of bath, concentration of dye, and reducing agent on dye uptake and color were investigated. The dye uptake was higher with no addition of alkali. Dyeing was carried out through the use of only sodium hydrosulfite in the bath. The maximum dye uptake was obtained at $60^{\circ}C$ for 30min and the dyed fabrics appeared in the PB Munsell color range. Dye uptake improved with the increase of a natural indigo dye concentration with the same sodium hydrosulfite concentration. At a higher dye uptake, the fabric color became more purplish and the maximum absorption shifted from 660nm to 620nm. Color reproducibility was reliable with a color difference in the range of 0.41~1.43. Regardless of color strength, washing and dry cleaning fastnesses were good with a 4/5 rating, and fastnesses to rubbing and light were acceptable with a 3/4~4 rating.