• Journal of Environmental Health Sciences
• /
• v.41 no.4
• /
• pp.268-276
• /
• 2015

Objectives: According to the 2007 Korea National Environmental Health Survey (KNEHS), some areas in the Gyeongsang Provinces showed very high blood mercury levels in adults. We conducted this project to investigate any related health effects in children due to mercury levels in these areas. Methods: In total, 1,097 students between grades 3 and 6 at 19 elementary schools were recruited from four areas with high mercury exposure as identified by the KNEHS. Total mercury levels in biological samples were compared with health check-ups performed on the schoolchildren. Biological monitoring, supported by questionnaires, a computerized neurobehavioral test, a posturography test and a personality test, were applied. Results: Triglycerides showed a significant relation with mercury in blood, urine and hair. Total mercury concentrations were divided into two groups: upper and lower concentration groups based on the median value. In the computerized neurobehavioral test, the upper blood mercury group showed a greater reaction time for color-word vigilance (p<0.05). In the posturography test, the intensity value of the tremor test showd high significant relations with mercury levels (p<0.01). In the personality test, self-consciousness, misdeeds and family relationships showed significant differences between the upper and lower urine mercury groups (p<0.01), and specific reactions, ego resilience and hyperactivity also showed some differences (p<0.1). Conclusion: Some items in the neurobehavioral test, posturography test and personality test showed significant relations with biological mercury levels. Therefore, monitoring and appropriate management of students showing high mercury levels are recommended in order to reduce their mercury exposure.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.6
• /
• pp.400-406
• /
• 2000

The fired Precursor (Y,Gd,Eu)(OH)$CO_3$.$H_2O$$900^{\circ}C$ was used to synthesize the red phosphor $(Y,Gd)_2O_3$: Eu for plasma display panel. Rounded and ~l $\mu\textrm{m}$ diameter phosphor $(Y,Gd)_2O_3$: Eu can be obtained by the reaction of aformentioned powder with a small amount addition of flux at $1350^{\circ}C$ for 2 hours. Emission spectra of these phosphors were measured under excitation wavelength at 254 nm and 147 nm and the optimum concentrations of activator ion were determined at around 15 mo1e % and 10 mole % under these conditions, respectively. $BaCO_3$flux had the best property in emission intensity among the prepared $BaCO_3AlF_3$and $Li_3PO_4$phosphors. The properties of optimized sample were improved in terms of relative luminance and color coordinate comparing with commercial phosphor such as $Y_2O_3$: Eu.

• Clean Technology
• /
• v.14 no.3
• /
• pp.211-217
• /
• 2008

We investigated the reduction of pollutants such as TOC (total organic carbon) and decolorization of Reactive Black 5 (RB5) by photocatalytic oxidation. The optimal values of major parameters for the reaction were obtained including the concentration of RB5, the amount of $TiO_2$ dosage and pH of solution. The values were 100 mg/L, 2 g/L and 4.9, respectively. As the concentration of oxygen increased, removal rate of pollutants increased. After $TiO_2$ was regenerated and used again by micro filtration (MF) ceramic membrane, the removal efficiency of color and removal rate of pollutants did not decrease significantly.

• Korean Journal of Materials Research
• /
• v.24 no.7
• /
• pp.351-356
• /
• 2014

A spherical $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor for use in white-light-emitting diodes was synthesized using a liquid-state reaction with two precipitation stages. For the formation of phosphor from a precursor, the calcination temperature was $1,100^{\circ}C$. The particle morphology of the phosphor was changed by controlling the processing conditions. The synthesized phosphor particles were spherical with a narrow size-distribution and had mono-dispersity. Upon excitation at 395 nm, the phosphor exhibited an emission band centered at 497 nm, corresponding to the $4f^65d{\rightarrow}4f^7$ electronic transitions of $Eu^{2+}$. The critical quenching-concentration of $Eu^{2+}$ in the synthesized $Sr_4Al_{14}O_{25}:Eu^{2+}$ phosphor was 5 mol%. A phosphor-converted LED was fabricated by the combination of the optimized spherical phosphor and a near-UV 390 nm LED chip. When this pc-LED was operated under various forward-bias currents at room temperature, the pc-LED exhibited a bright blue-green emission band, and high color-stability against changes in input power. Accordingly, the prepared spherical phosphor appears to be an excellent candidate for white LED applications.

• Journal of Life Science
• /
• v.10 no.2
• /
• pp.202-209
• /
• 2000

The factors affecting chemical composition of green tea (Camellia sinensis L.) during extraction process were temperatures and times. The optimum extraction conditions were measured in relation to the changes of chemical compositions from water extracts of green tea (Camellia sinensis L.) under different extraction temperatures (50, 70, 9$0^{\circ}C$) and extraction times (1, 3, 5 minute). The change of color intensity during browning reaction, flavonoid components, contents of total phenols and hydrogen donating activity (reducing activity for $\alpha$, $\alpha$'-diphenyl-$\beta$ -picryhydrazyl) of water extracts form green tea increased as extraction temperatures increased from 50 to 9$0^{\circ}C$ and extraction times prolonged from 1 to 5 min. The contents of important free sugars such as sucrose and glucose slightly increased as the extraction time was prolonged, while little difference in the content of fructose with the prolonged extraction time. Catechins contents extracted from the commercial steamed green tea were increased at higher temperature and longer extraction time. Epigallocatechin (EGC) extracted from 9$0^{\circ}C$ (extraction time 5 min). presented 99.9 mg/g in highest composition of catechin followed by epigallocatechin gallate (EGCg), epicatechin (EC), epicatechin gallate (ECg). The content of vitamin C extracted from green tea was increased about 2 times as the extraction temperature increased from 50 to 9$0^{\circ}C$ and as the extraction time increased from 1 to 5 min. with exception at 9$0^{\circ}C$(extraction time:5 min) which showed less vitamin C content than 7$0^{\circ}C$(extraction time : 3 min) probably due to possible destruction of vitamin C by high temperature.

• Journal of the Korean Ceramic Society
• /
• v.51 no.6
• /
• pp.533-538
• /
• 2014

Today, silicon and epoxy resin are used as materials of conversion lenses for white LEDs on the basis of their good bonding and transparency in LED packages. But these materials give rise to long-term performance problems such as reaction with water, yellowing transition, and shrinkage by heat. These problems are major factors underlying performance deterioration of LEDs. In this study, in order to address these problems, we fabricated a conversion lenses using glass, which has good chemical durability and is stable to heat. The fabricated conversion lenses were applied to a remote phosphor type. In this experiment, the conversion lens for white LED was coated on a glass substrate by a screen printing method using paste. The thickness of the coated conversion lens was controlled during 2 or 3 iterations of coating. The conversion lens fabricated under high heat treatment temperature and with a thin coating showed higher luminance efficiency and CCT closer to white light than fabricated lenses under low heat treatment temperature or a thick coating. The conversion lens with $32{\mu}m$ coating thickness showed the best optical properties: the measured values of the CCT, CRI, and luminance efficiency were 4468 K, 68, and 142.22 lm/w in 20 wt% glass frit, 80 wt% phosphor with sintering at $800^{\circ}C$.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.44-50
• /
• 1992

The $\alpha$-FeOOH powders were prepared by allkaline and acidic method on the small scale plant from the waste pickling liquor of iron. $\alpha$-FeOOH, $\alpha-Fe_2O_3$, $Fe_3O_4$ and ${\gamma}-Fe_2O_3$ powders were examined by TEM, SEM, TG-DTA, X-ray diffraction, VSM and chemical analysis. The results obtained from the experiment could be summerized as follows : the reaction time for the preparation of $\alpha$-FeOOH was observed to be smaller in the case of alkaline method and the products was acicular with the size of about $0.5\mu\textrm{m}$. The color of $\alpha-FeOOH and $\alpha-Fe_2O_3$was lovely yellow and red, respectively. The magnetic properties of $Fe_3O_4$ obtained by the reduction of $\alpha-Fe_2O_3$in the $H_2$ atomosphere at $370^{\circ}C$ for 1 hour showed 367(Oe) and 82.7(emu/g).

• Horticultural Science & Technology
• /
• v.18 no.2
• /
• pp.103-106
• /
• 2000

The genetic relationship of Bletilla striata native to Korea and Japan was investigated using random amplified polymorphic DNA (RAPD). The 156 reproducible DNA bands, consisted of 58 polymorphic and 98 monomorphic bands, were obtained by polymerase chain reaction (PCR) with selected 10 random primers. The 8 Bletilla lines have been classified into three groups according to the similarity coefficient obtained by RAPD analysis. The dendrogram showed overall correlationship between similarity coefficient of 0.48 and 0.84. The first group included A (Bletilla striata native to Korea), B (Bletilla striata variegated and native to Korea in Mokpo), C (Bletilla striata variegated and native to Korea), D and E (Bletilla striata native to Japan). In this group, it was showed that B and C had the most similar genetic relationship. The similarity coefficient between D and E was 0.77. D and E had a very close resemblance in plant height and flower color with A native to Korea, respectively. The second group included only G (dwarf Bletilla native to Japan) and had a different morphological character compared to other cultivars. The last group included F and H (dwarf and variegated Bletilla native to Japan) and they had a similarity of variegation.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.2
• /
• pp.103-107
• /
• 2002

Diphosphine dinuclear gold(I) complexes were synthesized from the reaction of bridged diphosphines and gold ions. As a bridged diphosphine, 1,2-bis(diphenylphosphino)metbane (dppm) or 1,1'-Bis(diphenylphosphino) ferrocene (dppf) was introduced. As anionic ligands, CI was first coordinated to Au, resulting in (diphosphine)$(AuCl)_{2}$. Then, the ligand, SPh, was substituted for Cl in the chloride complex to give (diphosphine)$(AuSPh)_{2}$. As a result, three digold complexes, (dppm)$(AuCl)_{2}$. (I), (dppf)$(AuCl)_{2}$. (II), and (dppf)$(AuSPh_{2}$. (III) were prepared in this study. The thermal properties were investigated at first hand to confirm that the gold complexes were in fact formed. The digold complexes were decomposed above $200^{\circ}C$ while the ligand, dppm or dppf, melts under $180^{\circ}C$ The photoluminescence (PL) spectra of the spin-coated thin films showed the maximum peak at 590, 595, and 540nm for the complex, I, II, and III, respectively. These complexes were found to give the orange color phosphorescence. Therefore, these digold complexes can be candidates for orange-red phosphorescent materials in organic electroluminescent devices (OELD). Further studies on application of the complexes as a dopant in an emitting layer are in progress in our laboratory.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.337-347
• /
• 2006

Papers made from unbleached and bleached bagasse chemimechanical pulp were chemically modified by acetylation. The effects of irradiation on unbleached and bleached also reduced papers of bagasse chemimechanical pulp before and after acetylation were investigated in this study. Chemimechanical pulp was prepared from bagasse and then bleached with hydrogen peroxide. Unbleached and hydrogen bleached pulps were reduced by Sodium borohydride in different procedures. Paper sheets were prepared from pulps and then acetylated using a technical grade of acetic anhydride. Accelerated photo-aging was run on the samples using fluorescent lamps to verify photo-stability of paper sheets before and after pretreatments. Brightness reversion (as Post-color number) and other optical properties of the paper sheets were measured. Efficient inhibition of photo-yellowing of papers made from bagasse CMP was achieved by acetylation. The acetylated unbleached CMP was noticeably photo-bleached during irradiation. Sodium borohydride reduction followed by acetylation had the same effect as acetylation alone at the same degree of reaction time and reductive treatment did not affect the yellowing rate to any great extent. The pre-reduced, acetylated unbleached papers were, however, not brightened during irradiation. Calculation done by Kubelka-Munk equation showed that reductive treatment had little effect in reducing the photo-yellowing of paper made from CMP pulp; a small stabilization effect was observed in the case of bleached CMP, while unbleached CMP was slightly more prone to discolor in the later phase of photo-reversion. The improved stability towards light may was closely related to the decrease in the phenolic hydroxyl content as a result of blocking by acetyl groups during treatment with acetic anhydride. The results support the hypothesis that phenolic hydroxyl has an important role in the process of photo-reversion of high-yield pulps. The results obtained in this study demonstrate that the acetylation of paper manufactured from peroxide bleached Bagasse CMP significantly retards light-induced discoloration. The inhibition of yellowing is connected with a decrease in the phenolic hydroxyl content of both unbleached and peroxide bleached papers.