• Journal of Chest Surgery
• /
• v.6 no.2
• /
• pp.213-218
• /
• 1973

Raynaud attempted to clarify the situation concerning symmetrical and spontaneous gangrene in a thesis published in 1952. The disease was defined as Raynaud`s phenomenon without associated and contributing conditions or disease, and described as two types, such as, `locale syncope and asphyxia` and `gangrene`. Predilection of Raynaud`s disease for female under 40 years of age wi-thout any vascular occlusive disease beginning in the early decades of life and typical color changes in the skin of the extremities incited by coldness are outstanding features in this disease. One typical case of Raynaud`s disease is presented with relating references. Patient was 24 year old female single patient, who noted pain, numbness, and cyanosis of the finger tips of both hands for 6 years previously in the winter season, and recently such symptoms were aggravated including her both feet for two years even in the summer after exposure to cold water. Physical and laboratory examination revealed nothing specific except slightly glistening tight face and hypertrophy of both finger tips with clammy coldness. FamiliaI and past history revealed nothing specific abnormal contributory factors. Biopsy of skin on the dorsum of right foot one year before this admission revealed no evidence of scleroderma. Treatment was aimed to relieve vasospasmodic reaction to coldness and was very successful with bilateral lumbar and thoracic sympathectomy. Patient is free of symptoms relating to the Raynaud’s phenomenon after sympathectomy for 6 months including winter season.

• The Plant Pathology Journal
• /
• v.20 no.4
• /
• pp.293-296
• /
• 2004

During the screening of antiviral substances having inhibitory effects on Tobacco mosaic virus (TMV) infection on tobacco plants, we found a bacterial isolate KTB3, and identified it as Acinetobacter sp. which strongly inhibited the infection of TMV When the culture filtrate from KTB3 was applied on the upper surface of the Xanthi-nc tobacco leaves at the same time, or 24 hours before TMV inoculation, almost complete inhibition was achieved. Likewise, 86% inhibition was achieved, when the culture filtrate was applied on the underside of the leaves. In field trials, transmission of TMV from diseased seedlings to healthy ones during transplanting work was reduced by 92%, when the culture filtrate was sprayed onto the tobacco seedlings, cv. NC82, 24 hours before transplanting. No toxic effect was observed on the tobacco plants. Antiviral substance from the culture filtrate was purified by ethanol precipitation, dialysis, DEAE-cellulose, and Sephadex G75 gel column chromatography. The partially purified active material which showed positive color reaction to sugar and protein inhibited TMV infection by 60% at 1 ${\mu}$g/ml.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.4
• /
• pp.45-56
• /
• 1998

Methyl fructoside oleic acid polyester(MFPE), fructose-based sugar polyester, was synthesized by solvent-free, soap-free transesterification of methyl oleate with methyl fructoside(MF) as a sugar starting material in the presence of conventional potassium carbonate basic catalyst. Methyl fructoside was found to be an effective sugar starting material, because of its low softning point, high heat stability, high miscibility, and high reactivity than other sugars. Yield 98% of purified MFPE based on initial weight of MF was obtained at 1:5 of the molar ratio of methyl fructoside to methyl oleate, 2%(w/w) of potassium carbonate catalyst content, 20${\sim}$200mmHg of reduced pressure and $180^{\circ}C$ of reaction temperature. MFPE structure was confirmed by infrared and proton nuclear magnetic resonance spectroscopy. Physical properties of methyl of fructoside oleic acid polyester such as viscosity, HLB, solubility, color, refractive index, specific gravity, and density were similar to physical properties of sucrose polyesters(SPE) and vegetable oils. Then, it was elucidated that MFPE was sufficient to replace the SPE and conventional oils.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.669-675
• /
• 2009

A study has been made on the preparation of liquid resin of non-solvent and non-discoloration type for replacement of the soft PVC at room temperature. A new synthetic process was developed by structure-control design of polyurethane synthesis using pre-polymer and polyols as curing agent. The optimum recipe was made according to macro-glycols, molecular weight and reaction conditions, and the final products indicated that the mechanical properties such as tensile strength, tear strength and flexibility was very excellent than PVC products. Also, viscosity, hardness and color operations of the final products can be controlled by this system. And yellowing property by UV and NOx gas was improved from the various additive experiment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2004

One of the most frequently used method for measurement of the degree of sizing (viz., hydrophobicity) is the Stockigt test. However, the Stockigt test was influenced by various factors such as dropping height, dropping amount, dropping speed and viewing angle. The resultant data of the sizing degree on the same specimen also varied according to different testers. Thus, the Stockigt test should be modified to be regarded as a highly reliable and reproducible standard method. For modifying the Stockigt test, it was required to quantify red coloration by reaction between 1％ ferric chloride and 2％ ammonium thiocyante during Stockigt testing. The cameras capturing the serial images during the red coloration process were the CMOS (Complementary Metal Oxide Semiconductor)-type and CCD (Charge Coupled Device)-type cameras. For measurement based on KS M 7025, the CCD-type camera must be used due to its high resolution, and on the other hand, for measurement based on Tappi Useful Method 429, the CMOS-type camera may be used owing to its low resolution. It was needed to covert the RGB values of a droplet image into HSV(Hue, Saturation, and Value) values because the human eyes are much closer to HSV than RGB. Among HSV values, the Hue value was accepted as the most reliable index consistent with the red coloration process by excluding the surrounding conditions such as light, tester's movement etc.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.1
• /
• pp.42-50
• /
• 2012

Light color reaction, immersion and diffusion operation through the mural art can be expressed in a variety of image types. In this paper, the digital pattern for mural art was formed by observation of the optical phenomena in natural gems and the relation between the optical sparkle in gems and minerals and pattern design was characterized. New possibility with relevance for design work based on ultramarine with a beautiful sheen and spectrum of the coloring was used for Sustainable 3D simulation modeling and represented by high-resolution Image graphic design.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1229-1232
• /
• 2005

We report the method of preventing the grey color of Bi based glass frits caused by reduction of $Bi_2O_3$. To prevent reduction of $Bi_2O_3$, we controlled the melting temperature. Low melting temperature reduces the reduction of $Bi_2O_3$ and that makes clarity transparent glass cullets. After firing, glass frits that melted at lower temperature showed better transparency. To prevent the browning, we used some additives like CuO, $CeO_2$, CoO and $TiO_2$. The colors of glass cullets were varied according to additives. After firing, dielectric layer contained additives showed better transparency than the one without additives. In the point of reaction between dielectric layer and Ag electrode, CuO was the most effective additive in preventing the yellowing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1017-1020
• /
• 2003

The effect of doping Gd, La for Y into $YVO_{4}:Eu^{3+}$ red phosphor on its photoluminescence(PL) intensity has been investigated. $YVO_{4}:$Eu-based phosphors were prepared by solid-state reaction at temperature above $1200^{\circ}C$. Under UV excitation(254, 365 nm), it was measured that $YVO_{4}:Eu^{3+}$ was superior to a commercial red phosphor (Y,Gd)$BO_{3}:Eu^{3+}$ in terms of PL intensity and CIE color coordinates. When La, Gd were doped into $YVO_{4}:Eu^{3+}$, the change in the structure of the host material was observed. In result, when the ($Y{1_x}La_{x})VO_{4}:Eu^{3+}$ phosphors were excited by 365 nm excitation, its PL intensity was improved up to about 30 % for the case of x being $0.4{\sim}0.6$.

• Advances in concrete construction
• /
• v.10 no.5
• /
• pp.417-429
• /
• 2020

Waste glass is a global solid waste with huge reserves. The discarded waste glass has caused a series of problems such as resource waste and environmental pollution, so it is urgent to recycle waste glass with high replacement level. Glass powder (GP), as a supplementary cementitious material (SCM), used in cement-based materials has already become one of the important ways to recycle waste glass mainly attributed to its pozzolanic reaction and filling effect, especially to the suppressed ASR expansion. This paper demonstrates an overview of the properties of GP and its effect on the fresh and mechanical properties of cement-based materials. The study found that the influence of GP on the performance of cement-based materials mainly depends on its content, particle size, color and type, curing conditions, and other SCMs. Finally, based on the problems involved in the investigation of concrete containing GP, some corresponding suggestions and efforts are given to further guide the utilization of GP in cement-based materials.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.443-446
• /
• 2007

The novel blue light emitting material, 9,10-bis(3',5'-diphenylphenyl)anthracene (BDA) was synthesized by Suzuki coupling reaction and characterized by the measurements of 1H NMR, 13C NMR and FT-IR. The new anthracene derivative, which contains anthracene as a main core unit and 3',5'-diphenylphenyl group derivative as wings, has high fluorescence yield, good thermal stability, and high glass transition temperature at 188 oC. With the newly non-doped blue emitting material in the multilayer device structure, it was possible to achieve the current efficiency of 3.0 cd/A. The EL spectrum of the ITO/CuPc/α-NPD/BDA/Alq3/LiF/Al device showed a maximum wavelength (λmax) at 440 nm. The emitting color of device showed the blue emission (x,y) = (0.18,0.19) at 10 mA/cm2 in CIE (Commission Internationale de l'Eclairage) chromaticity coordinates.