• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.47-54
• /
• 2020

To develop the bright-vivid red- and yellow-inorganic fluorescent pigments with high luminescence properties, A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments were synthesized by a water assisted solid state reaction (WASSR) method and a conventional solid state reaction method. Although impurity peaks corresponding to the AVO₃ and AV₃O₈ (A = K, Rb, and Cs) were observed in all samples prepared, the trigonal structure A₃V₅O₁₄ (A = K and Rb) and orthorhombic structure Cs₂V₄O₁₁ were successfully obtained as a main phase. These inorganic pigments showed the broad absorption band (under 550 nm) originated from CT transitions of VO₄ polyhedron, and the strong broad red- and green-emission bands due to ³T₂ → ¹A₁ and ³T₁ → ¹A₁ transitions of the [VO₄]^3- group. The A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ pigments showed a bright-vivid red- and yellow-body color, where the a* values of the A₃V₅O₁₄ (A = K and Rb) were +35.5 and +45.9, respectively, and b* value of Cs₂V₄O₁₁ pigments was +50.3. The L* values of the A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments were over +45. These results indicate that the A₃V₅O₁₄ (A = K and Rb) and Cs₂V₄O₁₁ inorganic pigments could be an attractive candidate as a bright-vivid red- and yellow inorganic pigments.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.16-21
• /
• 2014

Characteristics of coating color penetration into paper were elucidated using various types of pulps and pigments. A commercial paper, KP and TMP handsheets were used for base paper. Clay and GCC were used as coating pigment. Laboratory rod draw down coater was used for coating application. Coating color penetration was evaluated by measuring the roughness of surface and back side of a coating layer. The results of coating roughness showed that clay was much better than GCC as a coating pigment. In case of pulp type, KP base paper was more effective than TMP base paper to reduce coating penetration.

• Microbiology and Biotechnology Letters
• /
• v.23 no.4
• /
• pp.472-478
• /
• 1995

Mycelial growth, color difference and productivity of red pigment of beni-koji by Monascus anka KCCM 11832 were examined with respect to it's pigment in submerged culture with various medium and culture conditions. Shaking incubation was more promoted mycelial growth and the production of pigments than that for non-shaking incubation, and red color became ten times deeper. The production of red pigment was the highest when incubated at 25$\circ$C for 7 days in pH 6.0, but mycelial growth was showed the highest at 32.5$\circ$C. The levels of carbon and nitrogen source for maximum red pigment production were 2% rice powder and 0.05% peptone, respectively and the level of peptone for maximum pigment production was lower than that for maximum mycelial growth. Among pigmentation promoting agents tested, MgSO$_{4}$, was found to be suitable for the production of red pigment, and the optimum level was 0.1%.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.341-344
• /
• 2017

Infrared (IR) filters were developed to implement integrated three-dimensional (3D) image sensors that are capable of obtaining both color image and depth information at the same time. The combination of light filters applicable to the 3D image sensor is composed of a modified IR cut filter mounted on the objective lens module and on-chip filters such as IR pass filters and color filters. The IR cut filters were fabricated by inorganic $SiO_2/TiO_2$ multilayered thin-film deposition using RF magnetron sputtering. On-chip IR pass filters were synthetized by dissolving various pigments and dyes in organic solvents and by subsequent patterning with photolithography. The fabrication process of the filters is fairly compatible with the complementary metal oxide semiconductor (CMOS) process. Thus, the IR cut filter and IR pass filter combined with conventional color filters are considered successfully applicable to 3D image sensors.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.04a
• /
• pp.103-110
• /
• 2000

This study was done in order to increase production speed using coater dryer in maximum capacity without print mottle. The aim of this study was to measure coating color immobilization content(CCIC) and to decrease CCIC through coating color optimization. The final goal of this study was the prevention of print mottle in maximum drying condition by CCIC control. As a result the measuring method of CCIC was set by brightness transition and the effective factors in pigments and binders were defined. With color optimization considered this factors, CCIC was decreased by 4%. Through this CCIC decrease and modification of coater utility, the print mottle was prevented even though using coater dryer in maximum.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.149-152
• /
• 2009

Recent trends show an increased usage of 'colored concrete', a inorganic pigmented concrete mix, especially in smalll to large scale buildings. However, due to lack of varieties, current usage of colored concrete is limited to the one or two simple color of the time in construction work. so, this study is to investigate the properties of concrete adding temperature reactive pigment. The results of the experiment, the basic material characteristics of concrete such as of compressive strength and slump is affected by the amount rate of adding the temperature reactive pigment. And, it showed the excellent color expression and changing with temperature reactive pigment.

• Korean Journal of Remote Sensing
• /
• v.18 no.5
• /
• pp.299-303
• /
• 2002

Many ocean color sensors are being operated at present and will be continued to operatein the coming years. However, these ocean color sensors have different spectral bands locations and higher level product algorithms. Thus the continuity of ocean color data from the satellite with different missions will be important for monitoring of oceanographic variation with long term research. In this study, CZCS band and algorithm are compared with OCTS and SeaWiFS algorithm for estimating chlorophyll. Missing bands of OCTS and CZCS for chlorophyll algorithm are estimated by linear-interpolation using SeaWiFS data. We were able to evaluate the effectiveness of the correction methods using linear interpolation method. Surprisingly, linear interpolation gave a better result than those of other bands.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.46-53
• /
• 2012

The purpose of this study was to investigate the functional properties of Changhoji with natural dyeing. This research would provide a basic information for interior material Changhoji. To estimate functional properties of super eight colors Changhoji, water staining, lightfastness, and floodlight color test were executed. In term of the water staining test, blue color showed the clear and other colors showed the little spot. As a result of measuring the lightfastness, Magenta color dyed with sappanwood showed the worst. But blue color dyed with indigo and Turquoise color dyed with indigo and Pagoda tree flower showed the highest. As a result of floodlight color test was no difference between sample color and floodlight color.

• Economic and Environmental Geology
• /
• v.43 no.3
• /
• pp.269-278
• /
• 2010

We investigated characteristics of the coloring material of Dancheong pigments and hope that this study contributes the revival of traditional Dancheong pigments color. For this purpose, we collected Dancheong fragment samples that fell off naturally from old wooden buildings in Gwangju and Jeonnam and analyzed the natural coloring material by XRD and EDS-SEM analysis method. In white pigments of Dancheong fragments, it is confirmed that gypsum$(CaSO_{4}{\cdot}2H_{2}O)$, quartz$(SiO_{2})$, white lead$(PbCO_{3})$ and calcite$(CaCO_{3})$ which have been used for white pigments since ancient times and $TiO_{2}$ which is common used in modern times. In red pigments of Dancheong fragments, it is confirmed that hematite$(Fe_{2}O_{3})$ and red lead$(Pb_{3}O_{4})$, which have been used for red pigments since ancient times and C.I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$ but there is no cinnabar(HgS) which has been used since B.C. 3000 in China. In yellow pigments of Dancheong fragments, it is confirmed that crocoite$(PbCrO_{4})$ and massicot(PbO). In blue pigments of Dancheong fragments, it is confirmed that sodalite$(Na_{4}BeAlSi_{4}O_{12}Cl)$ and nosean $(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$ as coloring material of blue pigment and C.I. pigments blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ which is used in modern times. In green pigments of Dancheong fragments, it is confirmed that calumetite$(Cu(OHCI)_{2}{\cdot}2H_{2}O)$, escolaite(Cr2O3), dichromium trioxide$(Cr_{2}O_{3})$, emerald green$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$, and C.I. pigments green$(C_{32}H_{16}-XCl_{x}Cu_{8})$ which is used in modern time. In black pigments of Dancheong fragments, Chiness ink(carbon black) is confirmed.

• Korean Journal of Food Science and Technology
• /
• v.6 no.4
• /
• pp.209-213
• /
• 1974

Pigments were extracted by aqueous acetone from the boiled canned oyster colored during storage and then the components were separated by thin layer chromatography. Totally eleven pigments could be isolated including one yellow, one red, five orange or reddish orange and four green components, and their UV-visible spectra were measured. It can be envisioned from the electronic spectral study and color reaction on the indivisual pigments isolated from the brown acetone extracts that the green pigments as well as most of the yellow orange ones may be porphyrin derivatives originated probably from the chlorophyll and some of the orange pigments contains ketocarotenoids. In particular, the pigment of band 8 which is expected to be pheophytin a or its derivatives and the carotenoid band 7 seem to be the major pigment. The close resemblance of the chromatogram of the colored muscle extract to that of the viscera suggests that the brown coloring material is probably originated from the viscera pigments.