• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.437-438
• /
• 2009

This study is to investigae the properties of mortar with temperature reactive pigment. The results of the experiment, the compression strength of mortar increases by the rate of chemical admixture and temperature reactive pigment. And it is also excellent color expression with the use of chemical admixture.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.673-676
• /
• 2008

Color concrete utilizes peculiar texture and color sense in external appearance actively as a finish. But, this color concrete is essential use of pigment for required color revelation, and color cone cleat from mixing of this pigment are different existent achromatic color concrete and basic properties of matter. this study progressed slump test and setting time examination through mortar injection resistance examination of mortar that mix Pigment.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.356-364
• /
• 2020

An experimental study to investigate the effect of self-cleaning of mortar mixed with photocatalyst was performed out in this study. Test parameters included the photocatalyst content and surface roughness of the specimens. The experimental mortar specimens were manufactured by mixing a photocatalyst by cement weight of 2.5%, 5.0%, 7.5% and 10.0%. In addition, the surface roughness was categorized into three cases. They included flat surface condition, little surface roughness(medium roughness), and high surface roughness. After mortar specimens were cured for 28 days, they were illuminated by an ultraviolet lamp for 24 hours and immersed in a methylene blue conditioning solution for 12 hours. Thereafter, an ultraviolet(UV) lamp was illuminated on the specimens for 48 hours in an experimental chamber and then the color change of methylene blue solution was measured by using a spectrophotometer over illuminating time of UV lamp. The color change of methylene blue tended to increase as photocatalyst contents increased. Test results meant that photocatalyst was effective for self-cleaning in mortar. However, the color change of the methylene blue solution did not show a noticeable tendency at different surface roughness conditions. It might be due to the uneven photocatalyst distribution on the surface of mortar specimens.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.150-154
• /
• 2000

Coloring admixture is used for take color inside and outside of mortar and concrete, differently form pigment and spray paint take color limited surface. In our country, Using the coloring admixture is very slight and regulation is not yet about it. But that is expected the increase with raising the standard of living. Especially it is used to civil structure like dam and seawall for the environment harmony. Then we observe, in this experiment, the effect of coloring admixture on the material properties of color concrete and propose the suitable mix-proportion of color concrete.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.56-65
• /
• 2022

This paper aims at estimating self-cleaning performance of mortar coated with photocatalytic suspension under various conditions. Experimental variables included the concentration (1.5 % and 3.0 %) of photocatalytic suspension for coating mortar specimen, the presence of hydrophilic agent in photocatalytic suspension, and applying the primer on the surface of mortar. The color change of methylene blue solution increased and accordingly self-cleaning performance increased as photocatalytic concentration increased. The presence of hydrophilic agent in photocatalytic suspension slightly decreased the self-cleaning performance compared to the conventional photocatalytic suspension. Test results also showed that mortar specimen including primer and specimen not including primer did not show significantly different self-cleaning performance. In addition, cracks on the surface of mortar specimens decreased as the photocatalytic concentration increased. Therefore, increase in cracks on the surface of mortar at different photocatalytic concentration might adversely affect the self-cleaning performance of mortar specimens.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.112-113
• /
• 2021

Since natural sand is being depleted, research is being conducted to use glass similar to sand as an aggregate. When non-reusable waste glass is crushed and used as fine aggregate, it is known that alkali of cement and silica of glass react to cause an alkali aggregate reaction. The purpose of this study is to provide basic data by studying the strength according to color to use waste glass as fine aggregate. When 10% was replaced, both flexural and compressive strength showed strength values similar to those of Plain. When replaced by 20% and 30%, the 7-day intensity was higher than that of Plain. In addition, colorless glass was found to have the highest strength among glass colors. More research is expected to be needed to become a fine aggregate of waste glass.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.25-26
• /
• 2020

During the molding process of the existing interlocking block, the pigment is firstly laid, and cement is poured on the pigment secondly to give vibration. Interlocking blocks made of conventional cement are entirely dark where the pigment area is removed. On the other hand, when looking at the mortar with oyster shells added, the color is closer to that of the existing cement mortar. Therefore, if an interlocking block is produced by adding a pigment to a mortar with an oyster shell added, it is considered that the amount of pigment is less than that of the existing interlocking block. This study is a basic study of interlocking blocks. To investigate the strength characteristics of mortar using oyster shell powder as aggregate, W/C is 25%, 50%, oyster shell replacement rate is 0%, 25%, 50%, 75%, 100% was substituted to make a mortar and its strength change was studied.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.156-161
• /
• 2020

Recently, as there has been growing demand for aesthetic quality in structural materials, the development of excellent color cement concrete having good coloration properties has become a requirement. This study is designed to analyze the basic physical properties of mortar and the properties of keeping the coloration under an ultraviolet ray accelerated weathering test environment according to changes in the mixing ratio between carbon black and iron oxide used as colorants. The test results show that the use of carbon black and iron oxide reduces the initial flow by 6.3~17.2 % and the air content by 3.5~31.5 % but increases the unit volume weight by 3.4~5.5 %, compared to ordinary Portland cement (OPC). In addition, the study shows that the addition of iron oxide increases the self drying shrinkage. So, caution needs to be taken on the workability of the concrete. The brightness value L^⁎ represented by black showed the most excellent black colour when carbon black 3 % and iron oxide 5 % are added. According to UV accelerated weatherproof test, the brightness value L^⁎ was found to increase in all experiment specimens by 4.28~11.97 %, and the color change by UV was found to be higher for the case where carbon black colorant was not used. Therefore, in terms of color revelation characteristics, the case using carbon black 3 % and iron oxide 5 % was found to show the best black color.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.52-72
• /
• 1984

This study was performed to obtain the basic data which can be applied to the use of epoxy resin mortars. The data was based on the properties of epoxy resin mortars depending upon various mixing ratios to compare those of cement mortar. The resin which was used at this experiment was Epi-Bis type epoxy resin which is extensively being used as concrete structures. In the case of epoxy resin mortar, mixing ratios of resin to fine aggregate were 1: 2, 1: 4, 1: 6, 1: 8, 1:10, 1 :12 and 1:14, but the ratio of cement to fine aggregate in cement mortar was 1 : 2.5. The results obtained are summarized as follows; 1.When the mixing ratio was 1: 6, the highest density was 2.01 g/cm$^3$, being lower than 2.13 g/cm$^3$ of that of cement mortar. 2.According to the water absorption and water permeability test, the watertightness was shown very high at the mixing ratios of 1: 2, 1: 4 and 1: 6. But then the mixing ratio was less than 1 : 6, the watertightness considerably decreased. By this result, it was regarded that optimum mixing ratio of epoxy resin mortar for watertight structures should be richer mixing ratio than 1: 6. 3.The hardening shrinkage was large as the mixing ratio became leaner, but the values were remarkably small as compared with cement mortar. And the influence of dryness and moisture was exerted little at richer mixing ratio than 1: 6, but its effect was obvious at the lean mixing ratio, 1: 8, 1:10,1:12 and 1:14. It was confirmed that the optimum mixing ratio for concrete structures which would be influenced by the repeated dryness and moisture should be rich mixing ratio higher than 1: 6. 4.The compressive, bending and splitting tensile strenghs were observed very high, even the value at the mixing ratio of 1:14 was higher than that of cement mortar. It showed that epoxy resin mortar especially was to have high strength in bending and splitting tensile strength. Also, the initial strength within 24 hours gave rise to high value. Thus it was clear that epoxy resin was rapid hardening material. The multiple regression equations of strength were computed depending on a function of mixing ratios and curing times. 5.The elastic moduli derived from the compressive stress-strain curve were slightly smaller than the value of cement mortar, and the toughness of epoxy resin mortar was larger than that of cement mortar. 6.The impact resistance was strong compared with cement mortar at all mixing ratios. Especially, bending impact strength by the square pillar specimens was higher than the impact resistance of flat specimens or cylinderic specimens. 7.The Brinell hardness was relatively larger than that of cement mortar, but it gradually decreased with the decline of mixing ratio, and Brinell hardness at mixing ratio of 1 :14 was much the same as cement mortar. 8.The abrasion rate of epoxy resin mortar at all mixing ratio, when Losangeles abation testing machine revolved 500 times, was very low. Even mixing ratio of 1 :14 was no more than 31.41%, which was less than critical abrasion rate 40% of coarse aggregate for cement concrete. Consequently, the abrasion rate of epoxy resin mortar was superior to cement mortar, and the relation between abrasion rate and Brinell hardness was highly significant as exponential curve. 9.The highest bond strength of epoxy resin mortar was 12.9 kg/cm$^2$ at the mixing ratio of 1:2. The failure of bonded flat steel specimens occurred on the part of epoxy resin mortar at the mixing ratio of 1: 2 and 1: 4, and that of bonded cement concrete specimens was fond on the part of combained concrete at the mixing ratio of 1 : 2 ,1: 4 and 1: 6. It was confirmed that the optimum mixing ratio for bonding of steel plate, and of cement concrete should be rich mixing ratio above 1 : 4 and 1 : 6 respectively. 10.The variations of color tone by heating began to take place at about 60˚C, and the ultimate change occurred at 120˚C. The compressive, bending and splitting tensile strengths increased with rising temperature up to 80˚ C, but these rapidly decreased when temperature was above 800 C. Accordingly, it was evident that the resistance temperature of epoxy resin mortar was about 80˚C which was generally considered lower than that of the other concrete materials. But it is likely that there is no problem in epoxy resin mortar when used for unnecessary materials of high temperature resistance. The multiple regression equations of strength were computed depending on a function of mixing ratios and heating temperatures. 11.The susceptibility to chemical attack of cement mortar was easily affected by inorganic and organic acid. and that of epoxy resin mortar with mixing ratio of 1: 4 was of great resistance. On the other hand, when mixing ratio was lower than 1 : 8 epoxy resin mortar had very poor resistance, especially being poor resistant to organicacid. Therefore, for the structures requiring chemical resistance optimum mixing of epoxy resin mortar should be rich mixing ratio higher than 1: 4.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.2
• /
• pp.9-16
• /
• 2015

This study comparatively analyzed thermal characteristics of the green color, which is currently used the most, and other various colors of a rooftop urethane water proofing sheet. This study also analyzed the cooling performance by color of the water proofing sheet that fused cooling paints, and presented the effective water proofing sheet color for building energy savings. The experimental results are as follows: (1) The value of L (brightness) diminished, and brilliance also became lower from the white color to the black color, and thus, it was confirmed that relatively more heat was absorbed. In a and b chromaticity, which is the color attribute that ignores brightness, no special relationship was identified. (2) Considering that the cooling performance effect is bigger in summer than winter, due to heat reflection, the white water proofing sheet is more effective in building energy savings than the green water proofing sheet that is currently used the most. (3) The water proofing sheet's color has an impact more on cooling performance than the color of the background side of a structure on which water proofing sheet is installed. The experiment object of gray, of which background side is similar to cement mortar, was lower by $5.7^{\circ}C$ than the white background side.